Total
28322 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-1578 | 1 Rfideas | 4 Micard Plus Ble, Micard Plus Ble Firmware, Micard Plus Ci and 1 more | 2024-09-20 | N/A | 5.3 MEDIUM |
| The MiCard PLUS Ci and MiCard PLUS BLE reader products developed by rf IDEAS and rebranded by NT-ware have a firmware fault that may result in characters randomly being dropped from some ID card reads, which would result in the wrong ID card number being assigned during ID card self-registration and might result in failed login attempts for end-users. Random characters being dropped from ID card numbers compromises the uniqueness of ID cards that can, therefore, result in a security issue if the users are using the ‘ID card self-registration’ function. | |||||
| CVE-2024-41958 | 1 Mailcow | 1 Mailcow\ | 2024-09-20 | N/A | 7.2 HIGH |
| mailcow: dockerized is an open source groupware/email suite based on docker. A vulnerability has been discovered in the two-factor authentication (2FA) mechanism. This flaw allows an authenticated attacker to bypass the 2FA protection, enabling unauthorized access to other accounts that are otherwise secured with 2FA. To exploit this vulnerability, the attacker must first have access to an account within the system and possess the credentials of the target account that has 2FA enabled. By leveraging these credentials, the attacker can circumvent the 2FA process and gain access to the protected account. This issue has been addressed in the `2024-07` release. All users are advised to upgrade. There are no known workarounds for this vulnerability. | |||||
| CVE-2024-45040 | 1 Consensys | 1 Gnark-crypto | 2024-09-20 | N/A | 5.9 MEDIUM |
| gnark is a fast zk-SNARK library that offers a high-level API to design circuits. Prior to version 0.11.0, commitments to private witnesses in Groth16 as implemented break the zero-knowledge property. The vulnerability affects only Groth16 proofs with commitments. Notably, PLONK proofs are not affected. The vulnerability affects the zero-knowledge property of the proofs - in case the witness (secret or internal) values are small, then the attacker may be able to enumerate all possible choices to deduce the actual value. If the possible choices for the variables to be committed is large or there are many values committed, then it would be computationally infeasible to enumerate all valid choices. It doesn't affect the completeness/soundness of the proofs. The vulnerability has been fixed in version 0.11.0. The patch to fix the issue is to add additional randomized value to the list of committed value at proving time to mask the rest of the values which were committed. As a workaround, the user can manually commit to a randomized value. | |||||
| CVE-2024-45039 | 1 Consensys | 1 Gnark-crypto | 2024-09-20 | N/A | 6.2 MEDIUM |
| gnark is a fast zk-SNARK library that offers a high-level API to design circuits. Versions prior to 0.11.0 have a soundness issue - in case of multiple commitments used inside the circuit the prover is able to choose all but the last commitment. As gnark uses the commitments for optimized non-native multiplication, lookup checks etc. as random challenges, then it could impact the soundness of the whole circuit. However, using multiple commitments has been discouraged due to the additional cost to the verifier and it has not been supported in the recursive in-circuit Groth16 verifier and Solidity verifier. gnark's maintainers expect the impact of the issue be very small - only for the users who have implemented the native Groth16 verifier or are using it with multiple commitments. We do not have information of such users. The issue has been patched in version 0.11.0. As a workaround, users should follow gnark maintainers' recommendation to use only a single commitment and then derive in-circuit commitments as needed using the `std/multicommit` package. | |||||
| CVE-2022-4100 | 1 Wpcerber | 1 Cerber Security Antispam \& Malware Scan | 2024-09-20 | N/A | 5.3 MEDIUM |
| The WP Cerber Security plugin for WordPress is vulnerable to IP Protection bypass in versions up to, and including 9.4 due to the plugin improperly checking for a visitor's IP address. This makes it possible for an attacker whose IP address has been blocked to bypass this control by setting the X-Forwarded-For: HTTP header to an IP Address that hasn't been blocked. | |||||
| CVE-2024-38210 | 1 Microsoft | 1 Edge Chromium | 2024-09-19 | N/A | 7.8 HIGH |
| Microsoft Edge (Chromium-based) Remote Code Execution Vulnerability | |||||
| CVE-2024-38209 | 1 Microsoft | 1 Edge Chromium | 2024-09-19 | N/A | 7.8 HIGH |
| Microsoft Edge (Chromium-based) Remote Code Execution Vulnerability | |||||
| CVE-2024-3679 | 1 Squirrly | 1 Wp Seo Plugin | 2024-09-19 | N/A | 7.5 HIGH |
| The Premium SEO Pack – WP SEO Plugin plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.6.001. This makes it possible for unauthenticated attackers to view limited information from password protected posts through the social meta data. | |||||
| CVE-2024-7553 | 2 Microsoft, Mongodb | 24 Windows 10 1507, Windows 10 1511, Windows 10 1607 and 21 more | 2024-09-19 | N/A | 7.8 HIGH |
| Incorrect validation of files loaded from a local untrusted directory may allow local privilege escalation if the underlying operating systems is Windows. This may result in the application executing arbitrary behaviour determined by the contents of untrusted files. This issue affects MongoDB Server v5.0 versions prior to 5.0.27, MongoDB Server v6.0 versions prior to 6.0.16, MongoDB Server v7.0 versions prior to 7.0.12, MongoDB Server v7.3 versions prior 7.3.3, MongoDB C Driver versions prior to 1.26.2 and MongoDB PHP Driver versions prior to 1.18.1. Required Configuration: Only environments with Windows as the underlying operating system is affected by this issue | |||||
| CVE-2024-46681 | 1 Linux | 1 Linux Kernel | 2024-09-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pktgen: use cpus_read_lock() in pg_net_init() I have seen the WARN_ON(smp_processor_id() != cpu) firing in pktgen_thread_worker() during tests. We must use cpus_read_lock()/cpus_read_unlock() around the for_each_online_cpu(cpu) loop. While we are at it use WARN_ON_ONCE() to avoid a possible syslog flood. | |||||
| CVE-2024-40865 | 1 Apple | 1 Visionos | 2024-09-19 | N/A | 5.3 MEDIUM |
| The issue was addressed by suspending Persona when the virtual keyboard is active. This issue is fixed in visionOS 1.3. Inputs to the virtual keyboard may be inferred from Persona. | |||||
| CVE-2024-46706 | 1 Linux | 1 Linux Kernel | 2024-09-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: fsl_lpuart: mark last busy before uart_add_one_port With "earlycon initcall_debug=1 loglevel=8" in bootargs, kernel sometimes boot hang. It is because normal console still is not ready, but runtime suspend is called, so early console putchar will hang in waiting TRDE set in UARTSTAT. The lpuart driver has auto suspend delay set to 3000ms, but during uart_add_one_port, a child device serial ctrl will added and probed with its pm runtime enabled(see serial_ctrl.c). The runtime suspend call path is: device_add |-> bus_probe_device |->device_initial_probe |->__device_attach |-> pm_runtime_get_sync(dev->parent); |-> pm_request_idle(dev); |-> pm_runtime_put(dev->parent); So in the end, before normal console ready, the lpuart get runtime suspended. And earlycon putchar will hang. To address the issue, mark last busy just after pm_runtime_enable, three seconds is long enough to switch from bootconsole to normal console. | |||||
| CVE-2024-3305 | 1 Utarit | 1 Soliclub | 2024-09-19 | N/A | 7.5 HIGH |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Utarit Information SoliClub allows Retrieve Embedded Sensitive Data.This issue affects SoliClub: before 4.4.0 for iOS, before 5.2.1 for Android. | |||||
| CVE-2024-6077 | 1 Rockwellautomation | 14 1756-en4, 1756-en4 Firmware, Compact Guardlogix 5380 Sil 2 and 11 more | 2024-09-19 | N/A | 7.5 HIGH |
| A denial-of-service vulnerability exists in the Rockwell Automation affected products when specially crafted packets are sent to the CIP Security Object. If exploited the device will become unavailable and require a factory reset to recover. | |||||
| CVE-2024-46702 | 1 Linux | 1 Linux Kernel | 2024-09-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Mark XDomain as unplugged when router is removed I noticed that when we do discrete host router NVM upgrade and it gets hot-removed from the PCIe side as a result of NVM firmware authentication, if there is another host connected with enabled paths we hang in tearing them down. This is due to fact that the Thunderbolt networking driver also tries to cleanup the paths and ends up blocking in tb_disconnect_xdomain_paths() waiting for the domain lock. However, at this point we already cleaned the paths in tb_stop() so there is really no need for tb_disconnect_xdomain_paths() to do that anymore. Furthermore it already checks if the XDomain is unplugged and bails out early so take advantage of that and mark the XDomain as unplugged when we remove the parent router. | |||||
| CVE-2024-46703 | 1 Linux | 1 Linux Kernel | 2024-09-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Revert "serial: 8250_omap: Set the console genpd always on if no console suspend" This reverts commit 68e6939ea9ec3d6579eadeab16060339cdeaf940. Kevin reported that this causes a crash during suspend on platforms that dont use PM domains. | |||||
| CVE-2024-46704 | 1 Linux | 1 Linux Kernel | 2024-09-19 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix spruious data race in __flush_work() When flushing a work item for cancellation, __flush_work() knows that it exclusively owns the work item through its PENDING bit. 134874e2eee9 ("workqueue: Allow cancel_work_sync() and disable_work() from atomic contexts on BH work items") added a read of @work->data to determine whether to use busy wait for BH work items that are being canceled. While the read is safe when @from_cancel, @work->data was read before testing @from_cancel to simplify code structure: data = *work_data_bits(work); if (from_cancel && !WARN_ON_ONCE(data & WORK_STRUCT_PWQ) && (data & WORK_OFFQ_BH)) { While the read data was never used if !@from_cancel, this could trigger KCSAN data race detection spuriously: ================================================================== BUG: KCSAN: data-race in __flush_work / __flush_work write to 0xffff8881223aa3e8 of 8 bytes by task 3998 on cpu 0: instrument_write include/linux/instrumented.h:41 [inline] ___set_bit include/asm-generic/bitops/instrumented-non-atomic.h:28 [inline] insert_wq_barrier kernel/workqueue.c:3790 [inline] start_flush_work kernel/workqueue.c:4142 [inline] __flush_work+0x30b/0x570 kernel/workqueue.c:4178 flush_work kernel/workqueue.c:4229 [inline] ... read to 0xffff8881223aa3e8 of 8 bytes by task 50 on cpu 1: __flush_work+0x42a/0x570 kernel/workqueue.c:4188 flush_work kernel/workqueue.c:4229 [inline] flush_delayed_work+0x66/0x70 kernel/workqueue.c:4251 ... value changed: 0x0000000000400000 -> 0xffff88810006c00d Reorganize the code so that @from_cancel is tested before @work->data is accessed. The only problem is triggering KCSAN detection spuriously. This shouldn't need READ_ONCE() or other access qualifiers. No functional changes. | |||||
| CVE-2024-46708 | 1 Linux | 1 Linux Kernel | 2024-09-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: qcom: x1e80100: Fix special pin offsets Remove the erroneus 0x100000 offset to prevent the boards from crashing on pin state setting, as well as for the intended state changes to take effect. | |||||
| CVE-2024-46709 | 1 Linux | 1 Linux Kernel | 2024-09-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix prime with external buffers Make sure that for external buffers mapping goes through the dma_buf interface instead of trying to access pages directly. External buffers might not provide direct access to readable/writable pages so to make sure the bo's created from external dma_bufs can be read dma_buf interface has to be used. Fixes crashes in IGT's kms_prime with vgem. Regular desktop usage won't trigger this due to the fact that virtual machines will not have multiple GPUs but it enables better test coverage in IGT. | |||||
| CVE-2024-46711 | 1 Linux | 1 Linux Kernel | 2024-09-19 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: fix ID 0 endp usage after multiple re-creations 'local_addr_used' and 'add_addr_accepted' are decremented for addresses not related to the initial subflow (ID0), because the source and destination addresses of the initial subflows are known from the beginning: they don't count as "additional local address being used" or "ADD_ADDR being accepted". It is then required not to increment them when the entrypoint used by the initial subflow is removed and re-added during a connection. Without this modification, this entrypoint cannot be removed and re-added more than once. | |||||