Total
51 CVE
CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
---|---|---|---|---|---|
CVE-2023-3724 | 1 Wolfssl | 1 Wolfssl | 2024-02-05 | N/A | 8.8 HIGH |
If a TLS 1.3 client gets neither a PSK (pre shared key) extension nor a KSE (key share extension) when connecting to a malicious server, a default predictable buffer gets used for the IKM (Input Keying Material) value when generating the session master secret. Using a potentially known IKM value when generating the session master secret key compromises the key generated, allowing an eavesdropper to reconstruct it and potentially allowing access to or meddling with message contents in the session. This issue does not affect client validation of connected servers, nor expose private key information, but could result in an insecure TLS 1.3 session when not controlling both sides of the connection. wolfSSL recommends that TLS 1.3 client side users update the version of wolfSSL used. | |||||
CVE-2021-44718 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | N/A | 5.9 MEDIUM |
wolfSSL through 5.0.0 allows an attacker to cause a denial of service and infinite loop in the client component by sending crafted traffic from a Machine-in-the-Middle (MITM) position. The root cause is that the client module accepts TLS messages that normally are only sent to TLS servers. | |||||
CVE-2022-42905 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | N/A | 9.1 CRITICAL |
In wolfSSL before 5.5.2, if callback functions are enabled (via the WOLFSSL_CALLBACKS flag), then a malicious TLS 1.3 client or network attacker can trigger a buffer over-read on the heap of 5 bytes. (WOLFSSL_CALLBACKS is only intended for debugging.) | |||||
CVE-2022-34293 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | N/A | 7.5 HIGH |
wolfSSL before 5.4.0 allows remote attackers to cause a denial of service via DTLS because a check for return-routability can be skipped. | |||||
CVE-2022-38153 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | N/A | 5.9 MEDIUM |
An issue was discovered in wolfSSL before 5.5.0 (when --enable-session-ticket is used); however, only version 5.3.0 is exploitable. Man-in-the-middle attackers or a malicious server can crash TLS 1.2 clients during a handshake. If an attacker injects a large ticket (more than 256 bytes) into a NewSessionTicket message in a TLS 1.2 handshake, and the client has a non-empty session cache, the session cache frees a pointer that points to unallocated memory, causing the client to crash with a "free(): invalid pointer" message. NOTE: It is likely that this is also exploitable during TLS 1.3 handshakes between a client and a malicious server. With TLS 1.3, it is not possible to exploit this as a man-in-the-middle. | |||||
CVE-2022-42961 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | N/A | 5.3 MEDIUM |
An issue was discovered in wolfSSL before 5.5.0. A fault injection attack on RAM via Rowhammer leads to ECDSA key disclosure. Users performing signing operations with private ECC keys, such as in server-side TLS connections, might leak faulty ECC signatures. These signatures can be processed via an advanced technique for ECDSA key recovery. (In 5.5.0 and later, WOLFSSL_CHECK_SIG_FAULTS can be used to address the vulnerability.) | |||||
CVE-2022-38152 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | N/A | 7.5 HIGH |
An issue was discovered in wolfSSL before 5.5.0. When a TLS 1.3 client connects to a wolfSSL server and SSL_clear is called on its session, the server crashes with a segmentation fault. This occurs in the second session, which is created through TLS session resumption and reuses the initial struct WOLFSSL. If the server reuses the previous session structure (struct WOLFSSL) by calling wolfSSL_clear(WOLFSSL* ssl) on it, the next received Client Hello (that resumes the previous session) crashes the server. Note that this bug is only triggered when resuming sessions using TLS session resumption. Only servers that use wolfSSL_clear instead of the recommended SSL_free; SSL_new sequence are affected. Furthermore, wolfSSL_clear is part of wolfSSL's compatibility layer and is not enabled by default. It is not part of wolfSSL's native API. | |||||
CVE-2022-39173 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | N/A | 7.5 HIGH |
In wolfSSL before 5.5.1, malicious clients can cause a buffer overflow during a TLS 1.3 handshake. This occurs when an attacker supposedly resumes a previous TLS session. During the resumption Client Hello a Hello Retry Request must be triggered. Both Client Hellos are required to contain a list of duplicate cipher suites to trigger the buffer overflow. In total, two Client Hellos have to be sent: one in the resumed session, and a second one as a response to a Hello Retry Request message. | |||||
CVE-2022-25638 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | 4.3 MEDIUM | 6.5 MEDIUM |
In wolfSSL before 5.2.0, certificate validation may be bypassed during attempted authentication by a TLS 1.3 client to a TLS 1.3 server. This occurs when the sig_algo field differs between the certificate_verify message and the certificate message. | |||||
CVE-2022-25640 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | 5.0 MEDIUM | 7.5 HIGH |
In wolfSSL before 5.2.0, a TLS 1.3 server cannot properly enforce a requirement for mutual authentication. A client can simply omit the certificate_verify message from the handshake, and never present a certificate. | |||||
CVE-2022-23408 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | 6.4 MEDIUM | 9.1 CRITICAL |
wolfSSL 5.x before 5.1.1 uses non-random IV values in certain situations. This affects connections (without AEAD) using AES-CBC or DES3 with TLS 1.1 or 1.2 or DTLS 1.1 or 1.2. This occurs because of misplaced memory initialization in BuildMessage in internal.c. | |||||
CVE-2021-38597 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | 4.3 MEDIUM | 5.9 MEDIUM |
wolfSSL before 4.8.1 incorrectly skips OCSP verification in certain situations of irrelevant response data that contains the NoCheck extension. | |||||
CVE-2021-24116 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | 4.0 MEDIUM | 4.9 MEDIUM |
In wolfSSL through 4.6.0, a side-channel vulnerability in base64 PEM file decoding allows system-level (administrator) attackers to obtain information about secret RSA keys via a controlled-channel and side-channel attack on software running in isolated environments that can be single stepped, especially Intel SGX. | |||||
CVE-2021-37155 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | 7.5 HIGH | 9.8 CRITICAL |
wolfSSL 4.6.x through 4.7.x before 4.8.0 does not produce a failure outcome when the serial number in an OCSP request differs from the serial number in the OCSP response. | |||||
CVE-2020-36177 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | 10.0 HIGH | 9.8 CRITICAL |
RsaPad_PSS in wolfcrypt/src/rsa.c in wolfSSL before 4.6.0 has an out-of-bounds write for certain relationships between key size and digest size. | |||||
CVE-2021-3336 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | 6.8 MEDIUM | 8.1 HIGH |
DoTls13CertificateVerify in tls13.c in wolfSSL before 4.7.0 does not cease processing for certain anomalous peer behavior (sending an ED22519, ED448, ECC, or RSA signature without the corresponding certificate). The client side is affected because man-in-the-middle attackers can impersonate TLS 1.3 servers. | |||||
CVE-2020-24585 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | 5.0 MEDIUM | 5.3 MEDIUM |
An issue was discovered in the DTLS handshake implementation in wolfSSL before 4.5.0. Clear DTLS application_data messages in epoch 0 do not produce an out-of-order error. Instead, these messages are returned to the application. | |||||
CVE-2020-24613 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | 4.9 MEDIUM | 6.8 MEDIUM |
wolfSSL before 4.5.0 mishandles TLS 1.3 server data in the WAIT_CERT_CR state, within SanityCheckTls13MsgReceived() in tls13.c. This is an incorrect implementation of the TLS 1.3 client state machine. This allows attackers in a privileged network position to completely impersonate any TLS 1.3 servers, and read or modify potentially sensitive information between clients using the wolfSSL library and these TLS servers. | |||||
CVE-2020-12457 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | 5.0 MEDIUM | 7.5 HIGH |
An issue was discovered in wolfSSL before 4.5.0. It mishandles the change_cipher_spec (CCS) message processing logic for TLS 1.3. If an attacker sends ChangeCipherSpec messages in a crafted way involving more than one in a row, the server becomes stuck in the ProcessReply() loop, i.e., a denial of service. | |||||
CVE-2020-11735 | 1 Wolfssl | 1 Wolfssl | 2024-02-04 | 5.0 MEDIUM | 5.3 MEDIUM |
The private-key operations in ecc.c in wolfSSL before 4.4.0 do not use a constant-time modular inverse when mapping to affine coordinates, aka a "projective coordinates leak." |