Total
8999 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-47680 | 1 Linux | 1 Linux Kernel | 2024-10-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: check discard support for conventional zones As the helper function f2fs_bdev_support_discard() shows, f2fs checks if the target block devices support discard by calling bdev_max_discard_sectors() and bdev_is_zoned(). This check works well for most cases, but it does not work for conventional zones on zoned block devices. F2fs assumes that zoned block devices support discard, and calls __submit_discard_cmd(). When __submit_discard_cmd() is called for sequential write required zones, it works fine since __submit_discard_cmd() issues zone reset commands instead of discard commands. However, when __submit_discard_cmd() is called for conventional zones, __blkdev_issue_discard() is called even when the devices do not support discard. The inappropriate __blkdev_issue_discard() call was not a problem before the commit 30f1e7241422 ("block: move discard checks into the ioctl handler") because __blkdev_issue_discard() checked if the target devices support discard or not. If not, it returned EOPNOTSUPP. After the commit, __blkdev_issue_discard() no longer checks it. It always returns zero and sets NULL to the given bio pointer. This NULL pointer triggers f2fs_bug_on() in __submit_discard_cmd(). The BUG is recreated with the commands below at the umount step, where /dev/nullb0 is a zoned null_blk with 5GB total size, 128MB zone size and 10 conventional zones. $ mkfs.f2fs -f -m /dev/nullb0 $ mount /dev/nullb0 /mnt $ for ((i=0;i<5;i++)); do dd if=/dev/zero of=/mnt/test bs=65536 count=1600 conv=fsync; done $ umount /mnt To fix the BUG, avoid the inappropriate __blkdev_issue_discard() call. When discard is requested for conventional zones, check if the device supports discard or not. If not, return EOPNOTSUPP. | |||||
| CVE-2023-52918 | 1 Linux | 1 Linux Kernel | 2024-10-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: pci: cx23885: check cx23885_vdev_init() return cx23885_vdev_init() can return a NULL pointer, but that pointer is used in the next line without a check. Add a NULL pointer check and go to the error unwind if it is NULL. | |||||
| CVE-2023-52919 | 1 Linux | 1 Linux Kernel | 2024-10-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix possible NULL pointer dereference in send_acknowledge() Handle memory allocation failure from nci_skb_alloc() (calling alloc_skb()) to avoid possible NULL pointer dereference. | |||||
| CVE-2022-49023 | 1 Linux | 1 Linux Kernel | 2024-10-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: fix buffer overflow in elem comparison For vendor elements, the code here assumes that 5 octets are present without checking. Since the element itself is already checked to fit, we only need to check the length. | |||||
| CVE-2022-49024 | 1 Linux | 1 Linux Kernel | 2024-10-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: can: m_can: pci: add missing m_can_class_free_dev() in probe/remove methods In m_can_pci_remove() and error handling path of m_can_pci_probe(), m_can_class_free_dev() should be called to free resource allocated by m_can_class_allocate_dev(), otherwise there will be memleak. | |||||
| CVE-2022-49025 | 1 Linux | 1 Linux Kernel | 2024-10-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free when reverting termination table When having multiple dests with termination tables and second one or afterwards fails the driver reverts usage of term tables but doesn't reset the assignment in attr->dests[num_vport_dests].termtbl which case a use-after-free when releasing the rule. Fix by resetting the assignment of termtbl to null. | |||||
| CVE-2022-49026 | 1 Linux | 1 Linux Kernel | 2024-10-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: e100: Fix possible use after free in e100_xmit_prepare In e100_xmit_prepare(), if we can't map the skb, then return -ENOMEM, so e100_xmit_frame() will return NETDEV_TX_BUSY and the upper layer will resend the skb. But the skb is already freed, which will cause UAF bug when the upper layer resends the skb. Remove the harmful free. | |||||
| CVE-2022-49027 | 1 Linux | 1 Linux Kernel | 2024-10-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iavf: Fix error handling in iavf_init_module() The iavf_init_module() won't destroy workqueue when pci_register_driver() failed. Call destroy_workqueue() when pci_register_driver() failed to prevent the resource leak. Similar to the handling of u132_hcd_init in commit f276e002793c ("usb: u132-hcd: fix resource leak") | |||||
| CVE-2024-49865 | 1 Linux | 1 Linux Kernel | 2024-10-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: move xa_alloc to prevent UAF Evil user can guess the next id of the vm before the ioctl completes and then call vm destroy ioctl to trigger UAF since create ioctl is still referencing the same vm. Move the xa_alloc all the way to the end to prevent this. v2: - Rebase (cherry picked from commit dcfd3971327f3ee92765154baebbaece833d3ca9) | |||||
| CVE-2024-49905 | 1 Linux | 1 Linux Kernel | 2024-10-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for 'afb' in amdgpu_dm_plane_handle_cursor_update (v2) This commit adds a null check for the 'afb' variable in the amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was assumed to be null, but was used later in the code without a null check. This could potentially lead to a null pointer dereference. Changes since v1: - Moved the null check for 'afb' to the line where 'afb' is used. (Alex) Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252) | |||||
| CVE-2024-49908 | 1 Linux | 1 Linux Kernel | 2024-10-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for 'afb' in amdgpu_dm_update_cursor (v2) This commit adds a null check for the 'afb' variable in the amdgpu_dm_update_cursor function. Previously, 'afb' was assumed to be null at line 8388, but was used later in the code without a null check. This could potentially lead to a null pointer dereference. Changes since v1: - Moved the null check for 'afb' to the line where 'afb' is used. (Alex) Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8433 amdgpu_dm_update_cursor() error: we previously assumed 'afb' could be null (see line 8388) | |||||
| CVE-2024-49907 | 1 Linux | 1 Linux Kernel | 2024-10-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointers before using dc->clk_mgr [WHY & HOW] dc->clk_mgr is null checked previously in the same function, indicating it might be null. Passing "dc" to "dc->hwss.apply_idle_power_optimizations", which dereferences null "dc->clk_mgr". (The function pointer resolves to "dcn35_apply_idle_power_optimizations".) This fixes 1 FORWARD_NULL issue reported by Coverity. | |||||
| CVE-2024-49910 | 1 Linux | 1 Linux Kernel | 2024-10-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for function pointer in dcn401_set_output_transfer_func This commit adds a null check for the set_output_gamma function pointer in the dcn401_set_output_transfer_func function. Previously, set_output_gamma was being checked for null, but then it was being dereferenced without any null check. This could lead to a null pointer dereference if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma. | |||||
| CVE-2024-47741 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race setting file private on concurrent lseek using same fd When doing concurrent lseek(2) system calls against the same file descriptor, using multiple threads belonging to the same process, we have a short time window where a race happens and can result in a memory leak. The race happens like this: 1) A program opens a file descriptor for a file and then spawns two threads (with the pthreads library for example), lets call them task A and task B; 2) Task A calls lseek with SEEK_DATA or SEEK_HOLE and ends up at file.c:find_desired_extent() while holding a read lock on the inode; 3) At the start of find_desired_extent(), it extracts the file's private_data pointer into a local variable named 'private', which has a value of NULL; 4) Task B also calls lseek with SEEK_DATA or SEEK_HOLE, locks the inode in shared mode and enters file.c:find_desired_extent(), where it also extracts file->private_data into its local variable 'private', which has a NULL value; 5) Because it saw a NULL file private, task A allocates a private structure and assigns to the file structure; 6) Task B also saw a NULL file private so it also allocates its own file private and then assigns it to the same file structure, since both tasks are using the same file descriptor. At this point we leak the private structure allocated by task A. Besides the memory leak, there's also the detail that both tasks end up using the same cached state record in the private structure (struct btrfs_file_private::llseek_cached_state), which can result in a use-after-free problem since one task can free it while the other is still using it (only one task took a reference count on it). Also, sharing the cached state is not a good idea since it could result in incorrect results in the future - right now it should not be a problem because it end ups being used only in extent-io-tree.c:count_range_bits() where we do range validation before using the cached state. Fix this by protecting the private assignment and check of a file while holding the inode's spinlock and keep track of the task that allocated the private, so that it's used only by that task in order to prevent user-after-free issues with the cached state record as well as potentially using it incorrectly in the future. | |||||
| CVE-2024-47738 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 3.3 LOW |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't use rate mask for offchannel TX either Like the commit ab9177d83c04 ("wifi: mac80211: don't use rate mask for scanning"), ignore incorrect settings to avoid no supported rate warning reported by syzbot. The syzbot did bisect and found cause is commit 9df66d5b9f45 ("cfg80211: fix default HE tx bitrate mask in 2G band"), which however corrects bitmask of HE MCS and recognizes correctly settings of empty legacy rate plus HE MCS rate instead of returning -EINVAL. As suggestions [1], follow the change of SCAN TX to consider this case of offchannel TX as well. [1] https://lore.kernel.org/linux-wireless/6ab2dc9c3afe753ca6fdcdd1421e7a1f47e87b84.camel@sipsolutions.net/T/#m2ac2a6d2be06a37c9c47a3d8a44b4f647ed4f024 | |||||
| CVE-2024-50064 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: zram: free secondary algorithms names We need to kfree() secondary algorithms names when reset zram device that had multi-streams, otherwise we leak memory. [senozhatsky@chromium.org: kfree(NULL) is legal] Link: https://lkml.kernel.org/r/20240917013021.868769-1-senozhatsky@chromium.org | |||||
| CVE-2024-50062 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-srv: Avoid null pointer deref during path establishment For RTRS path establishment, RTRS client initiates and completes con_num of connections. After establishing all its connections, the information is exchanged between the client and server through the info_req message. During this exchange, it is essential that all connections have been established, and the state of the RTRS srv path is CONNECTED. So add these sanity checks, to make sure we detect and abort process in error scenarios to avoid null pointer deref. | |||||
| CVE-2024-50048 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fbcon: Fix a NULL pointer dereference issue in fbcon_putcs syzbot has found a NULL pointer dereference bug in fbcon. Here is the simplified C reproducer: struct param { uint8_t type; struct tiocl_selection ts; }; int main() { struct fb_con2fbmap con2fb; struct param param; int fd = open("/dev/fb1", 0, 0); con2fb.console = 0x19; con2fb.framebuffer = 0; ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb); param.type = 2; param.ts.xs = 0; param.ts.ys = 0; param.ts.xe = 0; param.ts.ye = 0; param.ts.sel_mode = 0; int fd1 = open("/dev/tty1", O_RDWR, 0); ioctl(fd1, TIOCLINUX, ¶m); con2fb.console = 1; con2fb.framebuffer = 0; ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb); return 0; } After calling ioctl(fd1, TIOCLINUX, ¶m), the subsequent ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb) causes the kernel to follow a different execution path: set_con2fb_map -> con2fb_init_display -> fbcon_set_disp -> redraw_screen -> hide_cursor -> clear_selection -> highlight -> invert_screen -> do_update_region -> fbcon_putcs -> ops->putcs Since ops->putcs is a NULL pointer, this leads to a kernel panic. To prevent this, we need to call set_blitting_type() within set_con2fb_map() to properly initialize ops->putcs. | |||||
| CVE-2024-50049 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointer before dereferencing se [WHAT & HOW] se is null checked previously in the same function, indicating it might be null; therefore, it must be checked when used again. This fixes 1 FORWARD_NULL issue reported by Coverity. | |||||
| CVE-2024-47724 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: use work queue to process beacon tx event Commit 3a415daa3e8b ("wifi: ath11k: add P2P IE in beacon template") from Feb 28, 2024 (linux-next), leads to the following Smatch static checker warning: drivers/net/wireless/ath/ath11k/wmi.c:1742 ath11k_wmi_p2p_go_bcn_ie() warn: sleeping in atomic context The reason is that ath11k_bcn_tx_status_event() will directly call might sleep function ath11k_wmi_cmd_send() during RCU read-side critical sections. The call trace is like: ath11k_bcn_tx_status_event() -> rcu_read_lock() -> ath11k_mac_bcn_tx_event() -> ath11k_mac_setup_bcn_tmpl() …… -> ath11k_wmi_bcn_tmpl() -> ath11k_wmi_cmd_send() -> rcu_read_unlock() Commit 886433a98425 ("ath11k: add support for BSS color change") added the ath11k_mac_bcn_tx_event(), commit 01e782c89108 ("ath11k: fix warning of RCU usage for ath11k_mac_get_arvif_by_vdev_id()") added the RCU lock to avoid warning but also introduced this BUG. Use work queue to avoid directly calling ath11k_mac_bcn_tx_event() during RCU critical sections. No need to worry about the deletion of vif because cancel_work_sync() will drop the work if it doesn't start or block vif deletion until the running work is done. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 | |||||