Total
100455 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-53036 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix call trace warning and hang when removing amdgpu device On GPUs with RAS enabled, below call trace and hang are observed when shutting down device. v2: use DRM device unplugged flag instead of shutdown flag as the check to prevent memory wipe in shutdown stage. [ +0.000000] RIP: 0010:amdgpu_vram_mgr_fini+0x18d/0x1c0 [amdgpu] [ +0.000001] PKRU: 55555554 [ +0.000001] Call Trace: [ +0.000001] <TASK> [ +0.000002] amdgpu_ttm_fini+0x140/0x1c0 [amdgpu] [ +0.000183] amdgpu_bo_fini+0x27/0xa0 [amdgpu] [ +0.000184] gmc_v11_0_sw_fini+0x2b/0x40 [amdgpu] [ +0.000163] amdgpu_device_fini_sw+0xb6/0x510 [amdgpu] [ +0.000152] amdgpu_driver_release_kms+0x16/0x30 [amdgpu] [ +0.000090] drm_dev_release+0x28/0x50 [drm] [ +0.000016] devm_drm_dev_init_release+0x38/0x60 [drm] [ +0.000011] devm_action_release+0x15/0x20 [ +0.000003] release_nodes+0x40/0xc0 [ +0.000001] devres_release_all+0x9e/0xe0 [ +0.000001] device_unbind_cleanup+0x12/0x80 [ +0.000003] device_release_driver_internal+0xff/0x160 [ +0.000001] driver_detach+0x4a/0x90 [ +0.000001] bus_remove_driver+0x6c/0xf0 [ +0.000001] driver_unregister+0x31/0x50 [ +0.000001] pci_unregister_driver+0x40/0x90 [ +0.000003] amdgpu_exit+0x15/0x120 [amdgpu] | |||||
| CVE-2025-27938 | 1 Growatt | 1 Cloud Portal | 2025-11-12 | N/A | 5.3 MEDIUM |
| Unauthenticated attackers can obtain restricted information about a user's smart device collections (i.e., "rooms"). | |||||
| CVE-2025-30254 | 1 Growatt | 1 Cloud Portal | 2025-11-12 | N/A | 5.3 MEDIUM |
| An unauthenticated attacker can obtain a serial number of a smart meter(s) using its owner's username. | |||||
| CVE-2025-30514 | 1 Growatt | 1 Cloud Portal | 2025-11-12 | N/A | 5.3 MEDIUM |
| Unauthenticated attackers can obtain restricted information about a user's smart device collections (i.e., "scenes"). | |||||
| CVE-2023-53050 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix memory leak in margining Memory for the usb4->margining needs to be relased for the upstream port of the router as well, even though the debugfs directory gets released with the router device removal. Fix this. | |||||
| CVE-2023-53049 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: ucsi: Fix NULL pointer deref in ucsi_connector_change() When ucsi_init() fails, ucsi->connector is NULL, yet in case of ucsi_acpi we may still get events which cause the ucs_acpi code to call ucsi_connector_change(), which then derefs the NULL ucsi->connector pointer. Fix this by not setting ucsi->ntfy inside ucsi_init() until ucsi_init() has succeeded, so that ucsi_connector_change() ignores the events because UCSI_ENABLE_NTFY_CONNECTOR_CHANGE is not set in the ntfy mask. | |||||
| CVE-2023-53048 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: fix warning when handle discover_identity message Since both source and sink device can send discover_identity message in PD3, kernel may dump below warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 169 at drivers/usb/typec/tcpm/tcpm.c:1446 tcpm_queue_vdm+0xe0/0xf0 Modules linked in: CPU: 0 PID: 169 Comm: 1-0050 Not tainted 6.1.1-00038-g6a3c36cf1da2-dirty #567 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : tcpm_queue_vdm+0xe0/0xf0 lr : tcpm_queue_vdm+0x2c/0xf0 sp : ffff80000c19bcd0 x29: ffff80000c19bcd0 x28: 0000000000000001 x27: ffff0000d11c8ab8 x26: ffff0000d11cc000 x25: 0000000000000000 x24: 00000000ff008081 x23: 0000000000000001 x22: 00000000ff00a081 x21: ffff80000c19bdbc x20: 0000000000000000 x19: ffff0000d11c8080 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000d716f580 x14: 0000000000000001 x13: ffff0000d716f507 x12: 0000000000000001 x11: 0000000000000000 x10: 0000000000000020 x9 : 00000000000ee098 x8 : 00000000ffffffff x7 : 000000000000001c x6 : ffff0000d716f580 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff80000c19bdbc x1 : 00000000ff00a081 x0 : 0000000000000004 Call trace: tcpm_queue_vdm+0xe0/0xf0 tcpm_pd_rx_handler+0x340/0x1ab0 kthread_worker_fn+0xcc/0x18c kthread+0x10c/0x110 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- Below sequences may trigger this warning: tcpm_send_discover_work(work) tcpm_send_vdm(port, USB_SID_PD, CMD_DISCOVER_IDENT, NULL, 0); tcpm_queue_vdm(port, header, data, count); port->vdm_state = VDM_STATE_READY; vdm_state_machine_work(work); <-- received discover_identity from partner vdm_run_state_machine(port); port->vdm_state = VDM_STATE_SEND_MESSAGE; mod_vdm_delayed_work(port, x); tcpm_pd_rx_handler(work); tcpm_pd_data_request(port, msg); tcpm_handle_vdm_request(port, msg->payload, cnt); tcpm_queue_vdm(port, response[0], &response[1], rlen - 1); --> WARN_ON(port->vdm_state > VDM_STATE_DONE); For this case, the state machine could still send out discover identity message later if we skip current discover_identity message. So we should handle the received message firstly and override the pending discover_identity message without warning in this case. Then, a delayed send_discover work will send discover_identity message again. | |||||
| CVE-2023-53051 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: dm crypt: add cond_resched() to dmcrypt_write() The loop in dmcrypt_write may be running for unbounded amount of time, thus we need cond_resched() in it. This commit fixes the following warning: [ 3391.153255][ C12] watchdog: BUG: soft lockup - CPU#12 stuck for 23s! [dmcrypt_write/2:2897] ... [ 3391.387210][ C12] Call trace: [ 3391.390338][ C12] blk_attempt_bio_merge.part.6+0x38/0x158 [ 3391.395970][ C12] blk_attempt_plug_merge+0xc0/0x1b0 [ 3391.401085][ C12] blk_mq_submit_bio+0x398/0x550 [ 3391.405856][ C12] submit_bio_noacct+0x308/0x380 [ 3391.410630][ C12] dmcrypt_write+0x1e4/0x208 [dm_crypt] [ 3391.416005][ C12] kthread+0x130/0x138 [ 3391.419911][ C12] ret_from_fork+0x10/0x18 | |||||
| CVE-2025-57697 | 2025-11-12 | N/A | 6.5 MEDIUM | ||
| AstrBot Project v3.5.22 has an arbitrary file read vulnerability in function _encode_image_bs64. Since the _encode_image_bs64 function defined in entities.py opens the image specified by the user in the request body and returns the image content as a base64-encoded string without checking the legitimacy of the image path, attackers can construct a series of malicious URLs to read any specified file, resulting in sensitive data leakage. | |||||
| CVE-2023-53054 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: fix a devres leak in hw_enable upon suspend resume Each time the platform goes to low power, PM suspend / resume routines call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset(). This adds a new devres each time. This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be called from udc_start(). This can be seen with tracing: - echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable - go to low power - cat /sys/kernel/debug/tracing/trace A new "ADD" entry is found upon each low power cycle: ... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes) ... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes) ... A second issue is addressed here: - regulator_bulk_enable() is called upon each PM cycle (suspend/resume). - regulator_bulk_disable() never gets called. So the reference count for these regulators constantly increase, by one upon each low power cycle, due to missing regulator_bulk_disable() call in __dwc2_lowlevel_hw_disable(). The original fix that introduced the devm_add_action_or_reset() call, fixed an issue during probe, that happens due to other errors in dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL. Rather fix the error path: disable all the low level hardware in the error path, by using the "hsotg->ll_hw_enabled" flag. Checking dr_mode has been introduced to avoid a dual call to dwc2_lowlevel_hw_disable(). "ll_hw_enabled" should achieve the same (and is used currently in the remove() routine). | |||||
| CVE-2023-53055 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fscrypt: destroy keyring after security_sb_delete() fscrypt_destroy_keyring() must be called after all potentially-encrypted inodes were evicted; otherwise it cannot safely destroy the keyring. Since inodes that are in-use by the Landlock LSM don't get evicted until security_sb_delete(), this means that fscrypt_destroy_keyring() must be called *after* security_sb_delete(). This fixes a WARN_ON followed by a NULL dereference, only possible if Landlock was being used on encrypted files. | |||||
| CVE-2025-37143 | 1 Arubanetworks | 1 Arubaos | 2025-11-12 | N/A | 4.9 MEDIUM |
| An arbitrary file download vulnerability exists in the web-based management interface of AOS-10 GW and AOS-8 Controller/Mobility Conductor operating systems. Successful exploitation could allow an Authenticated malicious actor to download arbitrary files through carefully constructed exploits. | |||||
| CVE-2025-37144 | 1 Arubanetworks | 1 Arubaos | 2025-11-12 | N/A | 4.9 MEDIUM |
| Arbitrary file download vulnerabilities exist in a low-level interface library in AOS-10 GW and AOS-8 Controller/Mobility Conductor operating systems. Successful exploitation could allow an authenticated malicious actor to download arbitrary files through carefully constructed exploits. | |||||
| CVE-2025-37145 | 1 Arubanetworks | 1 Arubaos | 2025-11-12 | N/A | 4.9 MEDIUM |
| Arbitrary file download vulnerabilities exist in a low-level interface library in AOS-10 GW and AOS-8 Controller/Mobility Conductor operating systems. Successful exploitation could allow an authenticated malicious actor to download arbitrary files through carefully constructed exploits. | |||||
| CVE-2025-54806 | 1 Weseek | 1 Growi | 2025-11-12 | N/A | 6.1 MEDIUM |
| GROWI v4.2.7 and earlier contains a cross-site scripting vulnerability in the page alert function. If a user accesses a crafted URL while logged in to the affected product, an arbitrary script may be executed on the user's web browser. | |||||
| CVE-2025-63784 | 2025-11-12 | N/A | 6.5 MEDIUM | ||
| An Open Redirect vulnerability exists in the OAuth callback handler in file onlook/apps/web/client/src/app/auth/callback/route.ts in Onlook web application 0.2.32. The vulnerability occurs because the application trusts the X-Forwarded-Host header value without proper validation when constructing a redirect URL. A remote attacker can send a manipulated X-Forwarded-Host header to redirect an authenticated user to an arbitrary external website under their control, which can be exploited for phishing attacks. | |||||
| CVE-2025-63687 | 2025-11-12 | N/A | 6.5 MEDIUM | ||
| An issue was discovered in rymcu forest thru commit f782e85 (2025-09-04) in function doBefore in file src/main/java/com/rymcu/forest/core/service/security/AuthorshipAspect.java, allowing authorized attackers to delete arbitrary users posts. | |||||
| CVE-2025-63686 | 2025-11-12 | N/A | 6.5 MEDIUM | ||
| There is an arbitrary file download vulnerability in GuoMinJim PersonManage thru commit 5a02b1ab208feacf3a34fc123c9381162afbaa95 (2020-11-23) in the document query function under the Download Center menu in the PersonManage system. | |||||
| CVE-2025-12103 | 2025-11-12 | N/A | 5.0 MEDIUM | ||
| A flaw was found in Red Hat Openshift AI Service. The TrustyAI component is granting all service accounts and users on a cluster permissions to get, list, watch any pod in any namespace on the cluster. TrustyAI is creating a role `trustyai-service-operator-lmeval-user-role` and a CRB `trustyai-service-operator-default-lmeval-user-rolebinding` which is being applied to `system:authenticated` making it so that every single user or service account can get a list of pods running in any namespace on the cluster Additionally users can access all `persistentvolumeclaims` and `lmevaljobs` | |||||
| CVE-2025-5680 | 1 Tongzhouyun | 1 Agilebpm | 2025-11-12 | 6.5 MEDIUM | 6.3 MEDIUM |
| A vulnerability classified as critical was found in Shenzhen Dashi Tongzhou Information Technology AgileBPM up to 2.5.0. Affected by this vulnerability is the function executeScript of the file /src/main/java/com/dstz/sys/rest/controller/SysScriptController.java of the component Groovy Script Handler. The manipulation of the argument script leads to deserialization. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. | |||||