Total
100455 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-37874 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: ngbe: fix memory leak in ngbe_probe() error path When ngbe_sw_init() is called, memory is allocated for wx->rss_key in wx_init_rss_key(). However, in ngbe_probe() function, the subsequent error paths after ngbe_sw_init() don't free the rss_key. Fix that by freeing it in error path along with wx->mac_table. Also change the label to which execution jumps when ngbe_sw_init() fails, because otherwise, it could lead to a double free for rss_key, when the mac_table allocation fails in wx_sw_init(). | |||||
| CVE-2025-37873 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: fix missing ring index trim on error path Commit under Fixes converted tx_prod to be free running but missed masking it on the Tx error path. This crashes on error conditions, for example when DMA mapping fails. | |||||
| CVE-2025-37872 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: txgbe: fix memory leak in txgbe_probe() error path When txgbe_sw_init() is called, memory is allocated for wx->rss_key in wx_init_rss_key(). However, in txgbe_probe() function, the subsequent error paths after txgbe_sw_init() don't free the rss_key. Fix that by freeing it in error path along with wx->mac_table. Also change the label to which execution jumps when txgbe_sw_init() fails, because otherwise, it could lead to a double free for rss_key, when the mac_table allocation fails in wx_sw_init(). | |||||
| CVE-2023-53066 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: qed/qed_sriov: guard against NULL derefs from qed_iov_get_vf_info We have to make sure that the info returned by the helper is valid before using it. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. | |||||
| CVE-2025-37871 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: decrease sc_count directly if fail to queue dl_recall A deadlock warning occurred when invoking nfs4_put_stid following a failed dl_recall queue operation: T1 T2 nfs4_laundromat nfs4_get_client_reaplist nfs4_anylock_blockers __break_lease spin_lock // ctx->flc_lock spin_lock // clp->cl_lock nfs4_lockowner_has_blockers locks_owner_has_blockers spin_lock // flctx->flc_lock nfsd_break_deleg_cb nfsd_break_one_deleg nfs4_put_stid refcount_dec_and_lock spin_lock // clp->cl_lock When a file is opened, an nfs4_delegation is allocated with sc_count initialized to 1, and the file_lease holds a reference to the delegation. The file_lease is then associated with the file through kernel_setlease. The disassociation is performed in nfsd4_delegreturn via the following call chain: nfsd4_delegreturn --> destroy_delegation --> destroy_unhashed_deleg --> nfs4_unlock_deleg_lease --> kernel_setlease --> generic_delete_lease The corresponding sc_count reference will be released after this disassociation. Since nfsd_break_one_deleg executes while holding the flc_lock, the disassociation process becomes blocked when attempting to acquire flc_lock in generic_delete_lease. This means: 1) sc_count in nfsd_break_one_deleg will not be decremented to 0; 2) The nfs4_put_stid called by nfsd_break_one_deleg will not attempt to acquire cl_lock; 3) Consequently, no deadlock condition is created. Given that sc_count in nfsd_break_one_deleg remains non-zero, we can safely perform refcount_dec on sc_count directly. This approach effectively avoids triggering deadlock warnings. | |||||
| CVE-2024-35475 | 1 Openkm | 1 Openkm | 2025-11-12 | N/A | 6.4 MEDIUM |
| A Cross-Site Request Forgery (CSRF) vulnerability was discovered in OpenKM Community Edition on or before version 6.3.12. The vulnerability exists in /admin/DatabaseQuery, which allows an attacker to manipulate a victim with administrative privileges to execute arbitrary SQL commands. | |||||
| CVE-2025-37888 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix null-ptr-deref in mlx5_create_{inner_,}ttc_table() Add NULL check for mlx5_get_flow_namespace() returns in mlx5_create_inner_ttc_table() and mlx5_create_ttc_table() to prevent NULL pointer dereference. | |||||
| CVE-2025-37887 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pds_core: handle unsupported PDS_CORE_CMD_FW_CONTROL result If the FW doesn't support the PDS_CORE_CMD_FW_CONTROL command the driver might at the least print garbage and at the worst crash when the user runs the "devlink dev info" devlink command. This happens because the stack variable fw_list is not 0 initialized which results in fw_list.num_fw_slots being a garbage value from the stack. Then the driver tries to access fw_list.fw_names[i] with i >= ARRAY_SIZE and runs off the end of the array. Fix this by initializing the fw_list and by not failing completely if the devcmd fails because other useful information is printed via devlink dev info even if the devcmd fails. | |||||
| CVE-2025-37886 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pds_core: make wait_context part of q_info Make the wait_context a full part of the q_info struct rather than a stack variable that goes away after pdsc_adminq_post() is done so that the context is still available after the wait loop has given up. There was a case where a slow development firmware caused the adminq request to time out, but then later the FW finally finished the request and sent the interrupt. The handler tried to complete_all() the completion context that had been created on the stack in pdsc_adminq_post() but no longer existed. This caused bad pointer usage, kernel crashes, and much wailing and gnashing of teeth. | |||||
| CVE-2024-12235 | 1 Tongzhouyun | 1 Agilebpm | 2025-11-12 | 6.5 MEDIUM | 6.3 MEDIUM |
| A vulnerability was found in Shenzhen Dashi Tongzhou Information Technology AgileBPM up to 1.0.0. It has been declared as critical. Affected by this vulnerability is the function doFilter of the file \agile-bpm-basic-master\ab-auth\ab-auth-spring-security-oauth2\src\main\java\com\dstz\auth\filter\AuthorizationTokenCheckFilter.java. The manipulation leads to improper access controls. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. | |||||
| CVE-2025-37884 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix deadlock between rcu_tasks_trace and event_mutex. Fix the following deadlock: CPU A _free_event() perf_kprobe_destroy() mutex_lock(&event_mutex) perf_trace_event_unreg() synchronize_rcu_tasks_trace() There are several paths where _free_event() grabs event_mutex and calls sync_rcu_tasks_trace. Above is one such case. CPU B bpf_prog_test_run_syscall() rcu_read_lock_trace() bpf_prog_run_pin_on_cpu() bpf_prog_load() bpf_tracing_func_proto() trace_set_clr_event() mutex_lock(&event_mutex) Delegate trace_set_clr_event() to workqueue to avoid such lock dependency. | |||||
| CVE-2025-37883 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: s390/sclp: Add check for get_zeroed_page() Add check for the return value of get_zeroed_page() in sclp_console_init() to prevent null pointer dereference. Furthermore, to solve the memory leak caused by the loop allocation, add a free helper to do the free job. | |||||
| CVE-2025-37881 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev() The variable d->name, returned by devm_kasprintf(), could be NULL. A pointer check is added to prevent potential NULL pointer dereference. This is similar to the fix in commit 3027e7b15b02 ("ice: Fix some null pointer dereference issues in ice_ptp.c"). This issue is found by our static analysis tool | |||||
| CVE-2025-26394 | 1 Solarwinds | 1 Observability Self-hosted | 2025-11-12 | N/A | 4.8 MEDIUM |
| SolarWinds Observability Self-Hosted is susceptible to an open redirection vulnerability. The URL is not properly sanitized, and an attacker could manipulate the string to redirect a user to a malicious site. The attack complexity is high, and authentication is required. | |||||
| CVE-2025-26392 | 1 Solarwinds | 1 Observability Self-hosted | 2025-11-12 | N/A | 5.4 MEDIUM |
| SolarWinds Observability Self-Hosted is susceptible to SQL injection vulnerability that may display sensitive data using a low-level account. This vulnerability requires authentication from a low-privilege account. | |||||
| CVE-2023-53043 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: sc7280: Mark PCIe controller as cache coherent If the controller is not marked as cache coherent, then kernel will try to ensure coherency during dma-ops and that may cause data corruption. So, mark the PCIe node as dma-coherent as the devices on PCIe bus are cache coherent. | |||||
| CVE-2023-53042 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Do not set DRR on pipe Commit [WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. | |||||
| CVE-2023-53041 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Perform lockless command completion in abort path While adding and removing the controller, the following call trace was observed: WARNING: CPU: 3 PID: 623596 at kernel/dma/mapping.c:532 dma_free_attrs+0x33/0x50 CPU: 3 PID: 623596 Comm: sh Kdump: loaded Not tainted 5.14.0-96.el9.x86_64 #1 RIP: 0010:dma_free_attrs+0x33/0x50 Call Trace: qla2x00_async_sns_sp_done+0x107/0x1b0 [qla2xxx] qla2x00_abort_srb+0x8e/0x250 [qla2xxx] ? ql_dbg+0x70/0x100 [qla2xxx] __qla2x00_abort_all_cmds+0x108/0x190 [qla2xxx] qla2x00_abort_all_cmds+0x24/0x70 [qla2xxx] qla2x00_abort_isp_cleanup+0x305/0x3e0 [qla2xxx] qla2x00_remove_one+0x364/0x400 [qla2xxx] pci_device_remove+0x36/0xa0 __device_release_driver+0x17a/0x230 device_release_driver+0x24/0x30 pci_stop_bus_device+0x68/0x90 pci_stop_and_remove_bus_device_locked+0x16/0x30 remove_store+0x75/0x90 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 ? do_user_addr_fault+0x1d8/0x680 ? do_syscall_64+0x69/0x80 ? exc_page_fault+0x62/0x140 ? asm_exc_page_fault+0x8/0x30 entry_SYSCALL_64_after_hwframe+0x44/0xae The command was completed in the abort path during driver unload with a lock held, causing the warning in abort path. Hence complete the command without any lock held. | |||||
| CVE-2023-53040 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ca8210: fix mac_len negative array access This patch fixes a buffer overflow access of skb->data if ieee802154_hdr_peek_addrs() fails. | |||||
| CVE-2023-53038 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read() If kzalloc() fails in lpfc_sli4_cgn_params_read(), then we rely on lpfc_read_object()'s routine to NULL check pdata. Currently, an early return error is thrown from lpfc_read_object() to protect us from NULL ptr dereference, but the errno code is -ENODEV. Change the errno code to a more appropriate -ENOMEM. | |||||