Total
100440 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-37827 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: return EIO on RAID1 block group write pointer mismatch There was a bug report about a NULL pointer dereference in __btrfs_add_free_space_zoned() that ultimately happens because a conversion from the default metadata profile DUP to a RAID1 profile on two disks. The stack trace has the following signature: BTRFS error (device sdc): zoned: write pointer offset mismatch of zones in raid1 profile BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:__btrfs_add_free_space_zoned.isra.0+0x61/0x1a0 RSP: 0018:ffffa236b6f3f6d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff96c8132f3400 RCX: 0000000000000001 RDX: 0000000010000000 RSI: 0000000000000000 RDI: ffff96c8132f3410 RBP: 0000000010000000 R08: 0000000000000003 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000ffffffff R12: 0000000000000000 R13: ffff96c758f65a40 R14: 0000000000000001 R15: 000011aac0000000 FS: 00007fdab1cb2900(0000) GS:ffff96e60ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 00000001a05ae000 CR4: 0000000000350ef0 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15c/0x2f0 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? __btrfs_add_free_space_zoned.isra.0+0x61/0x1a0 btrfs_add_free_space_async_trimmed+0x34/0x40 btrfs_add_new_free_space+0x107/0x120 btrfs_make_block_group+0x104/0x2b0 btrfs_create_chunk+0x977/0xf20 btrfs_chunk_alloc+0x174/0x510 ? srso_return_thunk+0x5/0x5f btrfs_inc_block_group_ro+0x1b1/0x230 btrfs_relocate_block_group+0x9e/0x410 btrfs_relocate_chunk+0x3f/0x130 btrfs_balance+0x8ac/0x12b0 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? __kmalloc_cache_noprof+0x14c/0x3e0 btrfs_ioctl+0x2686/0x2a80 ? srso_return_thunk+0x5/0x5f ? ioctl_has_perm.constprop.0.isra.0+0xd2/0x120 __x64_sys_ioctl+0x97/0xc0 do_syscall_64+0x82/0x160 ? srso_return_thunk+0x5/0x5f ? __memcg_slab_free_hook+0x11a/0x170 ? srso_return_thunk+0x5/0x5f ? kmem_cache_free+0x3f0/0x450 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? syscall_exit_to_user_mode+0x10/0x210 ? srso_return_thunk+0x5/0x5f ? do_syscall_64+0x8e/0x160 ? sysfs_emit+0xaf/0xc0 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? seq_read_iter+0x207/0x460 ? srso_return_thunk+0x5/0x5f ? vfs_read+0x29c/0x370 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? syscall_exit_to_user_mode+0x10/0x210 ? srso_return_thunk+0x5/0x5f ? do_syscall_64+0x8e/0x160 ? srso_return_thunk+0x5/0x5f ? exc_page_fault+0x7e/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fdab1e0ca6d RSP: 002b:00007ffeb2b60c80 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fdab1e0ca6d RDX: 00007ffeb2b60d80 RSI: 00000000c4009420 RDI: 0000000000000003 RBP: 00007ffeb2b60cd0 R08: 0000000000000000 R09: 0000000000000013 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffeb2b6343b R14: 00007ffeb2b60d80 R15: 0000000000000001 </TASK> CR2: 0000000000000058 ---[ end trace 0000000000000000 ]--- The 1st line is the most interesting here: BTRFS error (device sdc): zoned: write pointer offset mismatch of zones in raid1 profile When a RAID1 block-group is created and a write pointer mismatch between the disks in the RAID set is detected, btrfs sets the alloc_offset to the length of the block group marking it as full. Afterwards the code expects that a balance operation will evacuate the data in this block-group and repair the problems. But before this is possible, the new space of this block-group will be accounted in the free space cache. But in __btrfs_ ---truncated--- | |||||
| CVE-2025-37136 | 1 Arubanetworks | 1 Arubaos | 2025-11-12 | N/A | 6.5 MEDIUM |
| Arbitrary file deletion vulnerabilities have been identified in the command-line interface of an AOS-8 Controller/Mobility Conductor. Successful exploitation of these vulnerabilities could allow an authenticated remote malicious actor to delete arbitrary files within the affected system. | |||||
| CVE-2023-53083 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: don't replace page in rq_pages if it's a continuation of last page The splice read calls nfsd_splice_actor to put the pages containing file data into the svc_rqst->rq_pages array. It's possible however to get a splice result that only has a partial page at the end, if (e.g.) the filesystem hands back a short read that doesn't cover the whole page. nfsd_splice_actor will plop the partial page into its rq_pages array and return. Then later, when nfsd_splice_actor is called again, the remainder of the page may end up being filled out. At this point, nfsd_splice_actor will put the page into the array _again_ corrupting the reply. If this is done enough times, rq_next_page will overrun the array and corrupt the trailing fields -- the rq_respages and rq_next_page pointers themselves. If we've already added the page to the array in the last pass, don't add it to the array a second time when dealing with a splice continuation. This was originally handled properly in nfsd_splice_actor, but commit 91e23b1c3982 ("NFSD: Clean up nfsd_splice_actor()") removed the check for it. | |||||
| CVE-2023-53086 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: connac: do not check WED status for non-mmio devices WED is supported just for mmio devices, so do not check it for usb or sdio devices. This patch fixes the crash reported below: [ 21.946627] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d [ 22.525298] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3) [ 22.548274] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d [ 22.557694] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3) [ 22.565885] wlp0s3u1i3: authenticated [ 22.569502] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 1/3) [ 22.578966] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=30 aid=3) [ 22.579113] wlp0s3u1i3: c4:41:1e:f5:2b:1d rejected association temporarily; comeback duration 1000 TU (1024 ms) [ 23.649518] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 2/3) [ 23.752528] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=0 aid=3) [ 23.797450] wlp0s3u1i3: associated [ 24.959527] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 24.959640] BUG: unable to handle page fault for address: ffff88800c223200 [ 24.959706] #PF: supervisor instruction fetch in kernel mode [ 24.959788] #PF: error_code(0x0011) - permissions violation [ 24.959846] PGD 2c01067 P4D 2c01067 PUD 2c02067 PMD c2a8063 PTE 800000000c223163 [ 24.959957] Oops: 0011 [#1] PREEMPT SMP [ 24.960009] CPU: 0 PID: 391 Comm: wpa_supplicant Not tainted 6.2.0-kvm #18 [ 24.960089] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 [ 24.960191] RIP: 0010:0xffff88800c223200 [ 24.960446] RSP: 0018:ffffc90000ff7698 EFLAGS: 00010282 [ 24.960513] RAX: ffff888028397010 RBX: ffff88800c26e630 RCX: 0000000000000058 [ 24.960598] RDX: ffff88800c26f844 RSI: 0000000000000006 RDI: ffff888028397010 [ 24.960682] RBP: ffff88800ea72f00 R08: 18b873fbab2b964c R09: be06b38235f3c63c [ 24.960766] R10: 18b873fbab2b964c R11: be06b38235f3c63c R12: 0000000000000001 [ 24.960853] R13: ffff88800c26f84c R14: ffff8880063f0ff8 R15: ffff88800c26e644 [ 24.960950] FS: 00007effcea327c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 [ 24.961036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.961106] CR2: ffff88800c223200 CR3: 000000000eaa2000 CR4: 00000000000006b0 [ 24.961190] Call Trace: [ 24.961219] <TASK> [ 24.961245] ? mt76_connac_mcu_add_key+0x2cf/0x310 [ 24.961313] ? mt7921_set_key+0x150/0x200 [ 24.961365] ? drv_set_key+0xa9/0x1b0 [ 24.961418] ? ieee80211_key_enable_hw_accel+0xd9/0x240 [ 24.961485] ? ieee80211_key_replace+0x3f3/0x730 [ 24.961541] ? crypto_shash_setkey+0x89/0xd0 [ 24.961597] ? ieee80211_key_link+0x2d7/0x3a0 [ 24.961664] ? crypto_aead_setauthsize+0x31/0x50 [ 24.961730] ? sta_info_hash_lookup+0xa6/0xf0 [ 24.961785] ? ieee80211_add_key+0x1fc/0x250 [ 24.961842] ? rdev_add_key+0x41/0x140 [ 24.961882] ? nl80211_parse_key+0x6c/0x2f0 [ 24.961940] ? nl80211_new_key+0x24a/0x290 [ 24.961984] ? genl_rcv_msg+0x36c/0x3a0 [ 24.962036] ? rdev_mod_link_station+0xe0/0xe0 [ 24.962102] ? nl80211_set_key+0x410/0x410 [ 24.962143] ? nl80211_pre_doit+0x200/0x200 [ 24.962187] ? genl_bind+0xc0/0xc0 [ 24.962217] ? netlink_rcv_skb+0xaa/0xd0 [ 24.962259] ? genl_rcv+0x24/0x40 [ 24.962300] ? netlink_unicast+0x224/0x2f0 [ 24.962345] ? netlink_sendmsg+0x30b/0x3d0 [ 24.962388] ? ____sys_sendmsg+0x109/0x1b0 [ 24.962388] ? ____sys_sendmsg+0x109/0x1b0 [ 24.962440] ? __import_iovec+0x2e/0x110 [ 24.962482] ? ___sys_sendmsg+0xbe/0xe0 [ 24.962525] ? mod_objcg_state+0x25c/0x330 [ 24.962576] ? __dentry_kill+0x19e/0x1d0 [ 24.962618] ? call_rcu+0x18f/0x270 [ 24.962660] ? __dentry_kill+0x19e/0x1d0 [ 24.962702] ? __x64_sys_sendmsg+0x70/0x90 [ 24.962744] ? do_syscall_64+0x3d/0x80 [ 24.962796] ? exit_to_user_mode_prepare+0x1b/0x70 [ 24.962852] ? entry_SYSCA ---truncated--- | |||||
| CVE-2023-53087 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/active: Fix misuse of non-idle barriers as fence trackers Users reported oopses on list corruptions when using i915 perf with a number of concurrently running graphics applications. Root cause analysis pointed at an issue in barrier processing code -- a race among perf open / close replacing active barriers with perf requests on kernel context and concurrent barrier preallocate / acquire operations performed during user context first pin / last unpin. When adding a request to a composite tracker, we try to reuse an existing fence tracker, already allocated and registered with that composite. The tracker we obtain may already track another fence, may be an idle barrier, or an active barrier. If the tracker we get occurs a non-idle barrier then we try to delete that barrier from a list of barrier tasks it belongs to. However, while doing that we don't respect return value from a function that performs the barrier deletion. Should the deletion ever fail, we would end up reusing the tracker still registered as a barrier task. Since the same structure field is reused with both fence callback lists and barrier tasks list, list corruptions would likely occur. Barriers are now deleted from a barrier tasks list by temporarily removing the list content, traversing that content with skip over the node to be deleted, then populating the list back with the modified content. Should that intentionally racy concurrent deletion attempts be not serialized, one or more of those may fail because of the list being temporary empty. Related code that ignores the results of barrier deletion was initially introduced in v5.4 by commit d8af05ff38ae ("drm/i915: Allow sharing the idle-barrier from other kernel requests"). However, all users of the barrier deletion routine were apparently serialized at that time, then the issue didn't exhibit itself. Results of git bisect with help of a newly developed igt@gem_barrier_race@remote-request IGT test indicate that list corruptions might start to appear after commit 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles"), introduced in v5.5. Respect results of barrier deletion attempts -- mark the barrier as idle only if successfully deleted from the list. Then, before proceeding with setting our fence as the one currently tracked, make sure that the tracker we've got is not a non-idle barrier. If that check fails then don't use that tracker but go back and try to acquire a new, usable one. v3: use unlikely() to document what outcome we expect (Andi), - fix bad grammar in commit description. v2: no code changes, - blame commit 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles"), v5.5, not commit d8af05ff38ae ("drm/i915: Allow sharing the idle-barrier from other kernel requests"), v5.4, - reword commit description. (cherry picked from commit 506006055769b10d1b2b4e22f636f3b45e0e9fc7) | |||||
| CVE-2023-53089 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix task hung in ext4_xattr_delete_inode Syzbot reported a hung task problem: ================================================================== INFO: task syz-executor232:5073 blocked for more than 143 seconds. Not tainted 6.2.0-rc2-syzkaller-00024-g512dee0c00ad #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-exec232 state:D stack:21024 pid:5073 ppid:5072 flags:0x00004004 Call Trace: <TASK> context_switch kernel/sched/core.c:5244 [inline] __schedule+0x995/0xe20 kernel/sched/core.c:6555 schedule+0xcb/0x190 kernel/sched/core.c:6631 __wait_on_freeing_inode fs/inode.c:2196 [inline] find_inode_fast+0x35a/0x4c0 fs/inode.c:950 iget_locked+0xb1/0x830 fs/inode.c:1273 __ext4_iget+0x22e/0x3ed0 fs/ext4/inode.c:4861 ext4_xattr_inode_iget+0x68/0x4e0 fs/ext4/xattr.c:389 ext4_xattr_inode_dec_ref_all+0x1a7/0xe50 fs/ext4/xattr.c:1148 ext4_xattr_delete_inode+0xb04/0xcd0 fs/ext4/xattr.c:2880 ext4_evict_inode+0xd7c/0x10b0 fs/ext4/inode.c:296 evict+0x2a4/0x620 fs/inode.c:664 ext4_orphan_cleanup+0xb60/0x1340 fs/ext4/orphan.c:474 __ext4_fill_super fs/ext4/super.c:5516 [inline] ext4_fill_super+0x81cd/0x8700 fs/ext4/super.c:5644 get_tree_bdev+0x400/0x620 fs/super.c:1282 vfs_get_tree+0x88/0x270 fs/super.c:1489 do_new_mount+0x289/0xad0 fs/namespace.c:3145 do_mount fs/namespace.c:3488 [inline] __do_sys_mount fs/namespace.c:3697 [inline] __se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fa5406fd5ea RSP: 002b:00007ffc7232f968 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fa5406fd5ea RDX: 0000000020000440 RSI: 0000000020000000 RDI: 00007ffc7232f970 RBP: 00007ffc7232f970 R08: 00007ffc7232f9b0 R09: 0000000000000432 R10: 0000000000804a03 R11: 0000000000000202 R12: 0000000000000004 R13: 0000555556a7a2c0 R14: 00007ffc7232f9b0 R15: 0000000000000000 </TASK> ================================================================== The problem is that the inode contains an xattr entry with ea_inum of 15 when cleaning up an orphan inode <15>. When evict inode <15>, the reference counting of the corresponding EA inode is decreased. When EA inode <15> is found by find_inode_fast() in __ext4_iget(), it is found that the EA inode holds the I_FREEING flag and waits for the EA inode to complete deletion. As a result, when inode <15> is being deleted, we wait for inode <15> to complete the deletion, resulting in an infinite loop and triggering Hung Task. To solve this problem, we only need to check whether the ino of EA inode and parent is the same before getting EA inode. | |||||
| CVE-2025-37137 | 1 Arubanetworks | 1 Arubaos | 2025-11-12 | N/A | 6.5 MEDIUM |
| Arbitrary file deletion vulnerabilities have been identified in the command-line interface of an AOS-8 Controller/Mobility Conductor. Successful exploitation of these vulnerabilities could allow an authenticated remote malicious actor to delete arbitrary files within the affected system. | |||||
| CVE-2025-37138 | 1 Arubanetworks | 1 Arubaos | 2025-11-12 | N/A | 6.2 MEDIUM |
| An authenticated command injection vulnerability exists in the command line interface binary of AOS-10 GW and AOS-8 Controllers/Mobility Conductor operating system. Exploitation of this vulnerability requires physical access to the hardware controllers. A successful attack could allow an authenticated malicious actor with physical access to execute arbitrary commands as a privileged user on the underlying operating system. | |||||
| CVE-2023-53091 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: update s_journal_inum if it changes after journal replay When mounting a crafted ext4 image, s_journal_inum may change after journal replay, which is obviously unreasonable because we have successfully loaded and replayed the journal through the old s_journal_inum. And the new s_journal_inum bypasses some of the checks in ext4_get_journal(), which may trigger a null pointer dereference problem. So if s_journal_inum changes after the journal replay, we ignore the change, and rewrite the current journal_inum to the superblock. | |||||
| CVE-2025-37140 | 1 Arubanetworks | 1 Arubaos | 2025-11-12 | N/A | 4.9 MEDIUM |
| Arbitrary file download vulnerabilities exist in the CLI binary of AOS-10 GW and AOS-8 Controller/Mobility Conductor operating systems. Successful exploitation could allow an authenticated malicious actor to download arbitrary files through carefully constructed exploits. | |||||
| CVE-2023-53092 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: interconnect: exynos: fix node leak in probe PM QoS error path Make sure to add the newly allocated interconnect node to the provider before adding the PM QoS request so that the node is freed on errors. | |||||
| CVE-2023-53093 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Do not let histogram values have some modifiers Histogram values can not be strings, stacktraces, graphs, symbols, syscalls, or grouped in buckets or log. Give an error if a value is set to do so. Note, the histogram code was not prepared to handle these modifiers for histograms and caused a bug. Mark Rutland reported: # echo 'p:copy_to_user __arch_copy_to_user n=$arg2' >> /sys/kernel/tracing/kprobe_events # echo 'hist:keys=n:vals=hitcount.buckets=8:sort=hitcount' > /sys/kernel/tracing/events/kprobes/copy_to_user/trigger # cat /sys/kernel/tracing/events/kprobes/copy_to_user/hist [ 143.694628] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 143.695190] Mem abort info: [ 143.695362] ESR = 0x0000000096000004 [ 143.695604] EC = 0x25: DABT (current EL), IL = 32 bits [ 143.695889] SET = 0, FnV = 0 [ 143.696077] EA = 0, S1PTW = 0 [ 143.696302] FSC = 0x04: level 0 translation fault [ 143.702381] Data abort info: [ 143.702614] ISV = 0, ISS = 0x00000004 [ 143.702832] CM = 0, WnR = 0 [ 143.703087] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000448f9000 [ 143.703407] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 143.704137] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 143.704714] Modules linked in: [ 143.705273] CPU: 0 PID: 133 Comm: cat Not tainted 6.2.0-00003-g6fc512c10a7c #3 [ 143.706138] Hardware name: linux,dummy-virt (DT) [ 143.706723] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 143.707120] pc : hist_field_name.part.0+0x14/0x140 [ 143.707504] lr : hist_field_name.part.0+0x104/0x140 [ 143.707774] sp : ffff800008333a30 [ 143.707952] x29: ffff800008333a30 x28: 0000000000000001 x27: 0000000000400cc0 [ 143.708429] x26: ffffd7a653b20260 x25: 0000000000000000 x24: ffff10d303ee5800 [ 143.708776] x23: ffffd7a6539b27b0 x22: ffff10d303fb8c00 x21: 0000000000000001 [ 143.709127] x20: ffff10d303ec2000 x19: 0000000000000000 x18: 0000000000000000 [ 143.709478] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 143.709824] x14: 0000000000000000 x13: 203a6f666e692072 x12: 6567676972742023 [ 143.710179] x11: 0a230a6d6172676f x10: 000000000000002c x9 : ffffd7a6521e018c [ 143.710584] x8 : 000000000000002c x7 : 7f7f7f7f7f7f7f7f x6 : 000000000000002c [ 143.710915] x5 : ffff10d303b0103e x4 : ffffd7a653b20261 x3 : 000000000000003d [ 143.711239] x2 : 0000000000020001 x1 : 0000000000000001 x0 : 0000000000000000 [ 143.711746] Call trace: [ 143.712115] hist_field_name.part.0+0x14/0x140 [ 143.712642] hist_field_name.part.0+0x104/0x140 [ 143.712925] hist_field_print+0x28/0x140 [ 143.713125] event_hist_trigger_print+0x174/0x4d0 [ 143.713348] hist_show+0xf8/0x980 [ 143.713521] seq_read_iter+0x1bc/0x4b0 [ 143.713711] seq_read+0x8c/0xc4 [ 143.713876] vfs_read+0xc8/0x2a4 [ 143.714043] ksys_read+0x70/0xfc [ 143.714218] __arm64_sys_read+0x24/0x30 [ 143.714400] invoke_syscall+0x50/0x120 [ 143.714587] el0_svc_common.constprop.0+0x4c/0x100 [ 143.714807] do_el0_svc+0x44/0xd0 [ 143.714970] el0_svc+0x2c/0x84 [ 143.715134] el0t_64_sync_handler+0xbc/0x140 [ 143.715334] el0t_64_sync+0x190/0x194 [ 143.715742] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (f9400000) [ 143.716510] ---[ end trace 0000000000000000 ]--- Segmentation fault | |||||
| CVE-2023-53094 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: fsl_lpuart: fix race on RX DMA shutdown From time to time DMA completion can come in the middle of DMA shutdown: <process ctx>: <IRQ>: lpuart32_shutdown() lpuart_dma_shutdown() del_timer_sync() lpuart_dma_rx_complete() lpuart_copy_rx_to_tty() mod_timer() lpuart_dma_rx_free() When the timer fires a bit later, sport->dma_rx_desc is NULL: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 pc : lpuart_copy_rx_to_tty+0xcc/0x5bc lr : lpuart_timer_func+0x1c/0x2c Call trace: lpuart_copy_rx_to_tty lpuart_timer_func call_timer_fn __run_timers.part.0 run_timer_softirq __do_softirq __irq_exit_rcu irq_exit handle_domain_irq gic_handle_irq call_on_irq_stack do_interrupt_handler ... To fix this fold del_timer_sync() into lpuart_dma_rx_free() after dmaengine_terminate_sync() to make sure timer will not be re-started in lpuart_copy_rx_to_tty() <= lpuart_dma_rx_complete(). | |||||
| CVE-2023-53095 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Fix a NULL pointer dereference The LRU mechanism may look up a resource in the process of being removed from an object. The locking rules here are a bit unclear but it looks currently like res->bo assignment is protected by the LRU lock, whereas bo->resource is protected by the object lock, while *clearing* of bo->resource is also protected by the LRU lock. This means that if we check that bo->resource points to the LRU resource under the LRU lock we should be safe. So perform that check before deciding to swap out a bo. That avoids dereferencing a NULL bo->resource in ttm_bo_swapout(). | |||||
| CVE-2023-53096 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: interconnect: fix mem leak when freeing nodes The node link array is allocated when adding links to a node but is not deallocated when nodes are destroyed. | |||||
| CVE-2023-53097 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. | |||||
| CVE-2023-53098 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: rc: gpio-ir-recv: add remove function In case runtime PM is enabled, do runtime PM clean up to remove cpu latency qos request, otherwise driver removal may have below kernel dump: [ 19.463299] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048 [ 19.472161] Mem abort info: [ 19.474985] ESR = 0x0000000096000004 [ 19.478754] EC = 0x25: DABT (current EL), IL = 32 bits [ 19.484081] SET = 0, FnV = 0 [ 19.487149] EA = 0, S1PTW = 0 [ 19.490361] FSC = 0x04: level 0 translation fault [ 19.495256] Data abort info: [ 19.498149] ISV = 0, ISS = 0x00000004 [ 19.501997] CM = 0, WnR = 0 [ 19.504977] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000049f81000 [ 19.511432] [0000000000000048] pgd=0000000000000000, p4d=0000000000000000 [ 19.518245] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 19.524520] Modules linked in: gpio_ir_recv(+) rc_core [last unloaded: rc_core] [ 19.531845] CPU: 0 PID: 445 Comm: insmod Not tainted 6.2.0-rc1-00028-g2c397a46d47c #72 [ 19.531854] Hardware name: FSL i.MX8MM EVK board (DT) [ 19.531859] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 19.551777] pc : cpu_latency_qos_remove_request+0x20/0x110 [ 19.557277] lr : gpio_ir_recv_runtime_suspend+0x18/0x30 [gpio_ir_recv] [ 19.557294] sp : ffff800008ce3740 [ 19.557297] x29: ffff800008ce3740 x28: 0000000000000000 x27: ffff800008ce3d50 [ 19.574270] x26: ffffc7e3e9cea100 x25: 00000000000f4240 x24: ffffc7e3f9ef0e30 [ 19.574284] x23: 0000000000000000 x22: ffff0061803820f4 x21: 0000000000000008 [ 19.574296] x20: ffffc7e3fa75df30 x19: 0000000000000020 x18: ffffffffffffffff [ 19.588570] x17: 0000000000000000 x16: ffffc7e3f9efab70 x15: ffffffffffffffff [ 19.595712] x14: ffff800008ce37b8 x13: ffff800008ce37aa x12: 0000000000000001 [ 19.602853] x11: 0000000000000001 x10: ffffcbe3ec0dff87 x9 : 0000000000000008 [ 19.609991] x8 : 0101010101010101 x7 : 0000000000000000 x6 : 000000000f0bfe9f [ 19.624261] x5 : 00ffffffffffffff x4 : 0025ab8e00000000 x3 : ffff006180382010 [ 19.631405] x2 : ffffc7e3e9ce8030 x1 : ffffc7e3fc3eb810 x0 : 0000000000000020 [ 19.638548] Call trace: [ 19.640995] cpu_latency_qos_remove_request+0x20/0x110 [ 19.646142] gpio_ir_recv_runtime_suspend+0x18/0x30 [gpio_ir_recv] [ 19.652339] pm_generic_runtime_suspend+0x2c/0x44 [ 19.657055] __rpm_callback+0x48/0x1dc [ 19.660807] rpm_callback+0x6c/0x80 [ 19.664301] rpm_suspend+0x10c/0x640 [ 19.667880] rpm_idle+0x250/0x2d0 [ 19.671198] update_autosuspend+0x38/0xe0 [ 19.675213] pm_runtime_set_autosuspend_delay+0x40/0x60 [ 19.680442] gpio_ir_recv_probe+0x1b4/0x21c [gpio_ir_recv] [ 19.685941] platform_probe+0x68/0xc0 [ 19.689610] really_probe+0xc0/0x3dc [ 19.693189] __driver_probe_device+0x7c/0x190 [ 19.697550] driver_probe_device+0x3c/0x110 [ 19.701739] __driver_attach+0xf4/0x200 [ 19.705578] bus_for_each_dev+0x70/0xd0 [ 19.709417] driver_attach+0x24/0x30 [ 19.712998] bus_add_driver+0x17c/0x240 [ 19.716834] driver_register+0x78/0x130 [ 19.720676] __platform_driver_register+0x28/0x34 [ 19.725386] gpio_ir_recv_driver_init+0x20/0x1000 [gpio_ir_recv] [ 19.731404] do_one_initcall+0x44/0x2ac [ 19.735243] do_init_module+0x48/0x1d0 [ 19.739003] load_module+0x19fc/0x2034 [ 19.742759] __do_sys_finit_module+0xac/0x12c [ 19.747124] __arm64_sys_finit_module+0x20/0x30 [ 19.751664] invoke_syscall+0x48/0x114 [ 19.755420] el0_svc_common.constprop.0+0xcc/0xec [ 19.760132] do_el0_svc+0x38/0xb0 [ 19.763456] el0_svc+0x2c/0x84 [ 19.766516] el0t_64_sync_handler+0xf4/0x120 [ 19.770789] el0t_64_sync+0x190/0x194 [ 19.774460] Code: 910003fd a90153f3 aa0003f3 91204021 (f9401400) [ 19.780556] ---[ end trace 0000000000000000 ]--- | |||||
| CVE-2025-37141 | 1 Arubanetworks | 1 Arubaos | 2025-11-12 | N/A | 4.9 MEDIUM |
| Arbitrary file download vulnerabilities exist in the CLI binary of AOS-10 GW and AOS-8 Controller/Mobility Conductor operating systems. Successful exploitation could allow an authenticated malicious actor to download arbitrary files through carefully constructed exploits. | |||||
| CVE-2025-37142 | 1 Arubanetworks | 1 Arubaos | 2025-11-12 | N/A | 4.9 MEDIUM |
| Arbitrary file download vulnerabilities exist in the CLI binary of AOS-10 GW and AOS-8 Controller/Mobility Conductor operating systems. Successful exploitation could allow an authenticated malicious actor to download arbitrary files through carefully constructed exploits. | |||||
| CVE-2023-53067 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Only call get_timer_irq() once in constant_clockevent_init() Under CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_DEBUG_PREEMPT=y, we can see the following messages on LoongArch, this is because using might_sleep() in preemption disable context. [ 0.001127] smp: Bringing up secondary CPUs ... [ 0.001222] Booting CPU#1... [ 0.001244] 64-bit Loongson Processor probed (LA464 Core) [ 0.001247] CPU1 revision is: 0014c012 (Loongson-64bit) [ 0.001250] FPU1 revision is: 00000000 [ 0.001252] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 [ 0.001255] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 [ 0.001257] preempt_count: 1, expected: 0 [ 0.001258] RCU nest depth: 0, expected: 0 [ 0.001259] Preemption disabled at: [ 0.001261] [<9000000000223800>] arch_dup_task_struct+0x20/0x110 [ 0.001272] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.2.0-rc7+ #43 [ 0.001275] Hardware name: Loongson Loongson-3A5000-7A1000-1w-A2101/Loongson-LS3A5000-7A1000-1w-A2101, BIOS vUDK2018-LoongArch-V4.0.05132-beta10 12/13/202 [ 0.001277] Stack : 0072617764726148 0000000000000000 9000000000222f1c 90000001001e0000 [ 0.001286] 90000001001e3be0 90000001001e3be8 0000000000000000 0000000000000000 [ 0.001292] 90000001001e3be8 0000000000000040 90000001001e3cb8 90000001001e3a50 [ 0.001297] 9000000001642000 90000001001e3be8 be694d10ce4139dd 9000000100174500 [ 0.001303] 0000000000000001 0000000000000001 00000000ffffe0a2 0000000000000020 [ 0.001309] 000000000000002f 9000000001354116 00000000056b0000 ffffffffffffffff [ 0.001314] 0000000000000000 0000000000000000 90000000014f6e90 9000000001642000 [ 0.001320] 900000000022b69c 0000000000000001 0000000000000000 9000000001736a90 [ 0.001325] 9000000100038000 0000000000000000 9000000000222f34 0000000000000000 [ 0.001331] 00000000000000b0 0000000000000004 0000000000000000 0000000000070000 [ 0.001337] ... [ 0.001339] Call Trace: [ 0.001342] [<9000000000222f34>] show_stack+0x5c/0x180 [ 0.001346] [<90000000010bdd80>] dump_stack_lvl+0x60/0x88 [ 0.001352] [<9000000000266418>] __might_resched+0x180/0x1cc [ 0.001356] [<90000000010c742c>] mutex_lock+0x20/0x64 [ 0.001359] [<90000000002a8ccc>] irq_find_matching_fwspec+0x48/0x124 [ 0.001364] [<90000000002259c4>] constant_clockevent_init+0x68/0x204 [ 0.001368] [<900000000022acf4>] start_secondary+0x40/0xa8 [ 0.001371] [<90000000010c0124>] smpboot_entry+0x60/0x64 Here are the complete call chains: smpboot_entry() start_secondary() constant_clockevent_init() get_timer_irq() irq_find_matching_fwnode() irq_find_matching_fwspec() mutex_lock() might_sleep() __might_sleep() __might_resched() In order to avoid the above issue, we should break the call chains, using timer_irq_installed variable as check condition to only call get_timer_irq() once in constant_clockevent_init() is a simple and proper way. | |||||