Total
100427 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-48096 | 2025-11-13 | N/A | 6.5 MEDIUM | ||
| Missing Authorization vulnerability in FRESHFACE Custom CSS custom-css-editor allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Custom CSS: from n/a through <= 1.4.0. | |||||
| CVE-2025-48095 | 2025-11-13 | N/A | 5.9 MEDIUM | ||
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Ays Pro Survey Maker survey-maker allows Stored XSS.This issue affects Survey Maker: from n/a through <= 5.1.8.8. | |||||
| CVE-2025-31029 | 2025-11-13 | N/A | 5.4 MEDIUM | ||
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in bingu replyMail replymail allows Stored XSS.This issue affects replyMail: from n/a through <= 1.2.0. | |||||
| CVE-2025-22288 | 2025-11-13 | N/A | 4.1 MEDIUM | ||
| Path Traversal: '.../...//' vulnerability in WPMU DEV - Your All-in-One WordPress Platform Smush Image Compression and Optimization wp-smushit allows Path Traversal.This issue affects Smush Image Compression and Optimization: from n/a through <= 3.17.0. | |||||
| CVE-2024-11831 | 2025-11-12 | N/A | 5.4 MEDIUM | ||
| A flaw was found in npm-serialize-javascript. The vulnerability occurs because the serialize-javascript module does not properly sanitize certain inputs, such as regex or other JavaScript object types, allowing an attacker to inject malicious code. This code could be executed when deserialized by a web browser, causing Cross-site scripting (XSS) attacks. This issue is critical in environments where serialized data is sent to web clients, potentially compromising the security of the website or web application using this package. | |||||
| CVE-2025-11237 | 2025-11-12 | N/A | 5.3 MEDIUM | ||
| The Make Email Customizer for WooCommerce WordPress plugin through 1.0.6 lacks proper authorization checks and option validation in its AJAX actions, allowing any authenticated user, such as a Subscriber, to update arbitrary WordPress options. | |||||
| CVE-2025-37829 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: scpi: Fix null-ptr-deref in scpi_cpufreq_get_rate() cpufreq_cpu_get_raw() can return NULL when the target CPU is not present in the policy->cpus mask. scpi_cpufreq_get_rate() does not check for this case, which results in a NULL pointer dereference. | |||||
| CVE-2025-37830 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: scmi: Fix null-ptr-deref in scmi_cpufreq_get_rate() cpufreq_cpu_get_raw() can return NULL when the target CPU is not present in the policy->cpus mask. scmi_cpufreq_get_rate() does not check for this case, which results in a NULL pointer dereference. Add NULL check after cpufreq_cpu_get_raw() to prevent this issue. | |||||
| CVE-2025-37831 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: apple-soc: Fix null-ptr-deref in apple_soc_cpufreq_get_rate() cpufreq_cpu_get_raw() can return NULL when the target CPU is not present in the policy->cpus mask. apple_soc_cpufreq_get_rate() does not check for this case, which results in a NULL pointer dereference. | |||||
| CVE-2025-37826 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Add NULL check in ufshcd_mcq_compl_pending_transfer() Add a NULL check for the returned hwq pointer by ufshcd_mcq_req_to_hwq(). This is similar to the fix in commit 74736103fb41 ("scsi: ufs: core: Fix ufshcd_abort_one racing issue"). | |||||
| CVE-2025-37809 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: class: Fix NULL pointer access Concurrent calls to typec_partner_unlink_device can lead to a NULL pointer dereference. This patch adds a mutex to protect USB device pointers and prevent this issue. The same mutex protects both the device pointers and the partner device registration. | |||||
| CVE-2025-37811 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: ci_hdrc_imx: fix usbmisc handling usbmisc is an optional device property so it is totally valid for the corresponding data->usbmisc_data to have a NULL value. Check that before dereferencing the pointer. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool. | |||||
| CVE-2025-37812 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: Fix deadlock when using NCM gadget The cdns3 driver has the same NCM deadlock as fixed in cdnsp by commit 58f2fcb3a845 ("usb: cdnsp: Fix deadlock issue during using NCM gadget"). Under PREEMPT_RT the deadlock can be readily triggered by heavy network traffic, for example using "iperf --bidir" over NCM ethernet link. The deadlock occurs because the threaded interrupt handler gets preempted by a softirq, but both are protected by the same spinlock. Prevent deadlock by disabling softirq during threaded irq handler. | |||||
| CVE-2025-37813 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix invalid pointer dereference in Etron workaround This check is performed before prepare_transfer() and prepare_ring(), so enqueue can already point at the final link TRB of a segment. And indeed it will, some 0.4% of times this code is called. Then enqueue + 1 is an invalid pointer. It will crash the kernel right away or load some junk which may look like a link TRB and cause the real link TRB to be replaced with a NOOP. This wouldn't end well. Use a functionally equivalent test which doesn't dereference the pointer and always gives correct result. Something has crashed my machine twice in recent days while playing with an Etron HC, and a control transfer stress test ran for confirmation has just crashed it again. The same test passes with this patch applied. | |||||
| CVE-2025-37814 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tty: Require CAP_SYS_ADMIN for all usages of TIOCL_SELMOUSEREPORT This requirement was overeagerly loosened in commit 2f83e38a095f ("tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN"), but as it turns out, (1) the logic I implemented there was inconsistent (apologies!), (2) TIOCL_SELMOUSEREPORT might actually be a small security risk after all, and (3) TIOCL_SELMOUSEREPORT is only meant to be used by the mouse daemon (GPM or Consolation), which runs as CAP_SYS_ADMIN already. In more detail: 1. The previous patch has inconsistent logic: In commit 2f83e38a095f ("tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN"), we checked for sel_mode == TIOCL_SELMOUSEREPORT, but overlooked that the lower four bits of this "mode" parameter were actually used as an additional way to pass an argument. So the patch did actually still require CAP_SYS_ADMIN, if any of the mouse button bits are set, but did not require it if none of the mouse buttons bits are set. This logic is inconsistent and was not intentional. We should have the same policies for using TIOCL_SELMOUSEREPORT independent of the value of the "hidden" mouse button argument. I sent a separate documentation patch to the man page list with more details on TIOCL_SELMOUSEREPORT: https://lore.kernel.org/all/20250223091342.35523-2-gnoack3000@gmail.com/ 2. TIOCL_SELMOUSEREPORT is indeed a potential security risk which can let an attacker simulate "keyboard" input to command line applications on the same terminal, like TIOCSTI and some other TIOCLINUX "selection mode" IOCTLs. By enabling mouse reporting on a terminal and then injecting mouse reports through TIOCL_SELMOUSEREPORT, an attacker can simulate mouse movements on the same terminal, similar to the TIOCSTI keystroke injection attacks that were previously possible with TIOCSTI and other TIOCL_SETSEL selection modes. Many programs (including libreadline/bash) are then prone to misinterpret these mouse reports as normal keyboard input because they do not expect input in the X11 mouse protocol form. The attacker does not have complete control over the escape sequence, but they can at least control the values of two consecutive bytes in the binary mouse reporting escape sequence. I went into more detail on that in the discussion at https://lore.kernel.org/all/20250221.0a947528d8f3@gnoack.org/ It is not equally trivial to simulate arbitrary keystrokes as it was with TIOCSTI (commit 83efeeeb3d04 ("tty: Allow TIOCSTI to be disabled")), but the general mechanism is there, and together with the small number of existing legit use cases (see below), it would be better to revert back to requiring CAP_SYS_ADMIN for TIOCL_SELMOUSEREPORT, as it was already the case before commit 2f83e38a095f ("tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN"). 3. TIOCL_SELMOUSEREPORT is only used by the mouse daemons (GPM or Consolation), and they are the only legit use case: To quote console_codes(4): The mouse tracking facility is intended to return xterm(1)-compatible mouse status reports. Because the console driver has no way to know the device or type of the mouse, these reports are returned in the console input stream only when the virtual terminal driver receives a mouse update ioctl. These ioctls must be generated by a mouse-aware user-mode application such as the gpm(8) daemon. Jared Finder has also confirmed in https://lore.kernel.org/all/491f3df9de6593df8e70dbe77614b026@finder.org/ that Emacs does not call TIOCL_SELMOUSEREPORT directly, and it would be difficult to find good reasons for doing that, given that it would interfere with the reports that GPM is sending. More information on the interaction between GPM, terminals and th ---truncated--- | |||||
| CVE-2025-37815 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: misc: microchip: pci1xxxx: Fix Kernel panic during IRQ handler registration Resolve kernel panic while accessing IRQ handler associated with the generated IRQ. This is done by acquiring the spinlock and storing the current interrupt state before handling the interrupt request using generic_handle_irq. A previous fix patch was submitted where 'generic_handle_irq' was replaced with 'handle_nested_irq'. However, this change also causes the kernel panic where after determining which GPIO triggered the interrupt and attempting to call handle_nested_irq with the mapped IRQ number, leads to a failure in locating the registered handler. | |||||
| CVE-2025-37816 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mei: vsc: Fix fortify-panic caused by invalid counted_by() use gcc 15 honors the __counted_by(len) attribute on vsc_tp_packet.buf[] and the vsc-tp.c code is using this in a wrong way. len does not contain the available size in the buffer, it contains the actual packet length *without* the crc. So as soon as vsc_tp_xfer() tries to add the crc to buf[] the fortify-panic handler gets triggered: [ 80.842193] memcpy: detected buffer overflow: 4 byte write of buffer size 0 [ 80.842243] WARNING: CPU: 4 PID: 272 at lib/string_helpers.c:1032 __fortify_report+0x45/0x50 ... [ 80.843175] __fortify_panic+0x9/0xb [ 80.843186] vsc_tp_xfer.cold+0x67/0x67 [mei_vsc_hw] [ 80.843210] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 [ 80.843229] ? lockdep_hardirqs_on+0x7c/0x110 [ 80.843250] mei_vsc_hw_start+0x98/0x120 [mei_vsc] [ 80.843270] mei_reset+0x11d/0x420 [mei] The easiest fix would be to just drop the counted-by but with the exception of the ack buffer in vsc_tp_xfer_helper() which only contains enough room for the packet-header, all other uses of vsc_tp_packet always use a buffer of VSC_TP_MAX_XFER_SIZE bytes for the packet. Instead of just dropping the counted-by, split the vsc_tp_packet struct definition into a header and a full-packet definition and use a fixed size buf[] in the packet definition, this way fortify-source buffer overrun checking still works when enabled. | |||||
| CVE-2025-37818 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Return NULL from huge_pte_offset() for invalid PMD LoongArch's huge_pte_offset() currently returns a pointer to a PMD slot even if the underlying entry points to invalid_pte_table (indicating no mapping). Callers like smaps_hugetlb_range() fetch this invalid entry value (the address of invalid_pte_table) via this pointer. The generic is_swap_pte() check then incorrectly identifies this address as a swap entry on LoongArch, because it satisfies the "!pte_present() && !pte_none()" conditions. This misinterpretation, combined with a coincidental match by is_migration_entry() on the address bits, leads to kernel crashes in pfn_swap_entry_to_page(). Fix this at the architecture level by modifying huge_pte_offset() to check the PMD entry's content using pmd_none() before returning. If the entry is invalid (i.e., it points to invalid_pte_table), return NULL instead of the pointer to the slot. | |||||
| CVE-2025-37820 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: xen-netfront: handle NULL returned by xdp_convert_buff_to_frame() The function xdp_convert_buff_to_frame() may return NULL if it fails to correctly convert the XDP buffer into an XDP frame due to memory constraints, internal errors, or invalid data. Failing to check for NULL may lead to a NULL pointer dereference if the result is used later in processing, potentially causing crashes, data corruption, or undefined behavior. On XDP redirect failure, the associated page must be released explicitly if it was previously retained via get_page(). Failing to do so may result in a memory leak, as the pages reference count is not decremented. | |||||
| CVE-2025-37821 | 1 Linux | 1 Linux Kernel | 2025-11-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: sched/eevdf: Fix se->slice being set to U64_MAX and resulting crash There is a code path in dequeue_entities() that can set the slice of a sched_entity to U64_MAX, which sometimes results in a crash. The offending case is when dequeue_entities() is called to dequeue a delayed group entity, and then the entity's parent's dequeue is delayed. In that case: 1. In the if (entity_is_task(se)) else block at the beginning of dequeue_entities(), slice is set to cfs_rq_min_slice(group_cfs_rq(se)). If the entity was delayed, then it has no queued tasks, so cfs_rq_min_slice() returns U64_MAX. 2. The first for_each_sched_entity() loop dequeues the entity. 3. If the entity was its parent's only child, then the next iteration tries to dequeue the parent. 4. If the parent's dequeue needs to be delayed, then it breaks from the first for_each_sched_entity() loop _without updating slice_. 5. The second for_each_sched_entity() loop sets the parent's ->slice to the saved slice, which is still U64_MAX. This throws off subsequent calculations with potentially catastrophic results. A manifestation we saw in production was: 6. In update_entity_lag(), se->slice is used to calculate limit, which ends up as a huge negative number. 7. limit is used in se->vlag = clamp(vlag, -limit, limit). Because limit is negative, vlag > limit, so se->vlag is set to the same huge negative number. 8. In place_entity(), se->vlag is scaled, which overflows and results in another huge (positive or negative) number. 9. The adjusted lag is subtracted from se->vruntime, which increases or decreases se->vruntime by a huge number. 10. pick_eevdf() calls entity_eligible()/vruntime_eligible(), which incorrectly returns false because the vruntime is so far from the other vruntimes on the queue, causing the (vruntime - cfs_rq->min_vruntime) * load calulation to overflow. 11. Nothing appears to be eligible, so pick_eevdf() returns NULL. 12. pick_next_entity() tries to dereference the return value of pick_eevdf() and crashes. Dumping the cfs_rq states from the core dumps with drgn showed tell-tale huge vruntime ranges and bogus vlag values, and I also traced se->slice being set to U64_MAX on live systems (which was usually "benign" since the rest of the runqueue needed to be in a particular state to crash). Fix it in dequeue_entities() by always setting slice from the first non-empty cfs_rq. | |||||