Total
1030 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2018-10585 | 1 Pexip | 1 Pexip Infinity | 2024-11-21 | 7.8 HIGH | 7.5 HIGH |
| Pexip Infinity before 18 allows remote Denial of Service (XML parsing). | |||||
| CVE-2018-10432 | 1 Pexip | 1 Pexip Infinity | 2024-11-21 | 7.8 HIGH | 7.5 HIGH |
| Pexip Infinity before 18 allows Remote Denial of Service (TLS handshakes in RTMP). | |||||
| CVE-2018-10193 | 1 Logmein | 1 Lastpass | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| LogMeIn LastPass through 4.15.0 allows remote attackers to cause a denial of service (browser hang) via an HTML document because the resource consumption of onloadwff.js grows with the number of INPUT elements. | |||||
| CVE-2018-10070 | 1 Mikrotik | 2 Router, Router Firmware | 2024-11-21 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in MikroTik Version 6.41.4 could allow an unauthenticated remote attacker to exhaust all available CPU and all available RAM by sending a crafted FTP request on port 21 that begins with many '\0' characters, preventing the affected router from accepting new FTP connections. The router will reboot after 10 minutes, logging a "router was rebooted without proper shutdown" message. | |||||
| CVE-2018-1000893 | 1 Bitcoinsv | 1 Bitcoin Sv | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| Bitcoin SV before 0.1.1 allows uncontrolled resource consumption when deserializing transactions. | |||||
| CVE-2018-1000892 | 1 Bitcoinsv | 1 Bitcoin Sv | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| Bitcoin SV before 0.1.1 allows uncontrolled resource consumption when receiving sendheaders messages. | |||||
| CVE-2018-1000891 | 1 Bitcoinsv | 1 Bitcoin Sv | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| Bitcoin SV before 0.1.1 allows uncontrolled resource consumption when receiving messages with invalid checksums. | |||||
| CVE-2018-1000518 | 1 Websockets Project | 1 Websockets | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| aaugustin websockets version 4 contains a CWE-409: Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in Servers and clients, unless configured with compression=None that can result in Denial of Service by memory exhaustion. This attack appear to be exploitable via Sending a specially crafted frame on an established connection. This vulnerability appears to have been fixed in 5. | |||||
| CVE-2018-1000115 | 4 Canonical, Debian, Memcached and 1 more | 4 Ubuntu Linux, Debian Linux, Memcached and 1 more | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| Memcached version 1.5.5 contains an Insufficient Control of Network Message Volume (Network Amplification, CWE-406) vulnerability in the UDP support of the memcached server that can result in denial of service via network flood (traffic amplification of 1:50,000 has been reported by reliable sources). This attack appear to be exploitable via network connectivity to port 11211 UDP. This vulnerability appears to have been fixed in 1.5.6 due to the disabling of the UDP protocol by default. | |||||
| CVE-2018-0700 | 1 Hyuki | 1 Yukiwiki | 2024-11-21 | 7.8 HIGH | 7.5 HIGH |
| YukiWiki 2.1.3 and earlier does not process a particular request properly that may allow consumption of large amounts of CPU and memory resources and may result in causing a denial of service condition. | |||||
| CVE-2018-0441 | 1 Cisco | 1 Access Points | 2024-11-21 | 6.1 MEDIUM | 7.4 HIGH |
| A vulnerability in the 802.11r Fast Transition feature set of Cisco IOS Access Points (APs) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a corruption of certain timer mechanisms triggered by specific roaming events. This corruption will eventually cause a timer crash. An attacker could exploit this vulnerability by sending malicious reassociation events multiple times to the same AP in a short period of time, causing a DoS condition on the affected AP. | |||||
| CVE-2018-0410 | 1 Cisco | 1 Web Security Appliance | 2024-11-21 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the web proxy functionality of Cisco AsyncOS Software for Cisco Web Security Appliances could allow an unauthenticated, remote attacker to exhaust system memory and cause a denial of service (DoS) condition on an affected system. The vulnerability exists because the affected software improperly manages memory resources for TCP connections to a targeted device. An attacker could exploit this vulnerability by establishing a high number of TCP connections to the data interface of an affected device via IPv4 or IPv6. A successful exploit could allow the attacker to exhaust system memory, which could cause the system to stop processing new connections and result in a DoS condition. System recovery may require manual intervention. Cisco Bug IDs: CSCvf36610. | |||||
| CVE-2018-0372 | 1 Cisco | 20 Nexus 92160yc-x, Nexus 92304qc, Nexus 9236c and 17 more | 2024-11-21 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the DHCPv6 feature of the Cisco Nexus 9000 Series Fabric Switches in Application-Centric Infrastructure (ACI) Mode could allow an unauthenticated, remote attacker to cause the device to run low on system memory, which could result in a Denial of Service (DoS) condition on an affected system. The vulnerability is due to improper memory management when DHCPv6 packets are received on an interface of the targeted device. An attacker could exploit this vulnerability by sending a high number of malicious DHCPv6 packets to be processed by an affected device. A successful exploit could allow the attacker to cause the system to run low on memory, which could cause an eventual reboot of an affected device. The vulnerability only applies to IPv6 protocol packets and not for IPv4 protocol packets. This vulnerability affects Cisco Nexus 9000 Series Fabric Switches in ACI Mode running software version 13.0(1k). The vulnerability can only be exploited when unicast routing is enabled on the Bridge Domain (BD). DHCP and DHCP relay do not have to be configured for the vulnerability to be exploited. Cisco Bug IDs: CSCvg38918. | |||||
| CVE-2018-0309 | 1 Cisco | 40 Nexus 3016, Nexus 3048, Nexus 3064 and 37 more | 2024-11-21 | 6.8 MEDIUM | 7.7 HIGH |
| A vulnerability in the implementation of a specific CLI command and the associated Simple Network Management Protocol (SNMP) MIB for Cisco NX-OS (in standalone NX-OS mode) on Cisco Nexus 3000 and 9000 Series Switches could allow an authenticated, remote attacker to exhaust system memory on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the incorrect implementation of the CLI command, resulting in a failure to free all allocated memory upon completion. An attacker could exploit this vulnerability by authenticating to the affected device and repeatedly issuing a specific CLI command or sending a specific SNMP poll request for a specific Object Identifier (OID). A successful exploit could allow the attacker to cause the IP routing process to restart or to cause a device reset, resulting in a DoS condition. Cisco Bug IDs: CSCvf23136. | |||||
| CVE-2018-0230 | 1 Cisco | 2 Adaptive Security Appliance Software, Firepower Threat Defense | 2024-11-21 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly validating IP Version 4 (IPv4) and IP Version 6 (IPv6) packets after the software reassembles the packets (following IP Fragmentation). An attacker could exploit this vulnerability by sending a series of malicious, fragmented IPv4 or IPv6 packets to an affected device. A successful exploit could allow the attacker to cause Snort processes on the affected device to hang at 100% CPU utilization, which could cause the device to stop processing traffic and result in a DoS condition until the device is reloaded manually. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.2.1 and 6.2.2, if the software is running on a Cisco Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCvf91098. | |||||
| CVE-2018-0094 | 1 Cisco | 1 Unified Computing System Central Software | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in IPv6 ingress packet processing for Cisco UCS Central Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high CPU utilization on the targeted device. The vulnerability is due to insufficient rate limiting protection for IPv6 ingress traffic. An attacker could exploit this vulnerability by sending the affected device a high rate of IPv6 packets. Successful exploitation could allow the attacker to cause a DoS condition due to CPU and resource constraints. Cisco Bug IDs: CSCuv34544. | |||||
| CVE-2018-0090 | 1 Cisco | 1 Nx-os | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in management interface access control list (ACL) configuration of Cisco NX-OS System Software could allow an unauthenticated, remote attacker to bypass configured ACLs on the management interface. This could allow traffic to be forwarded to the NX-OS CPU for processing, leading to high CPU utilization and a denial of service (DoS) condition. The vulnerability is due to a bad code fix in the 7.3.2 code train that could allow traffic to the management interface to be misclassified and not match the proper configured ACLs. An attacker could exploit this vulnerability by sending crafted traffic to the management interface. An exploit could allow the attacker to bypass the configured management interface ACLs and impact the CPU of the targeted device, resulting in a DoS condition. This vulnerability affects the following Cisco products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCvf31132. | |||||
| CVE-2018-0086 | 1 Cisco | 1 Unified Customer Voice Portal | 2024-11-21 | 5.0 MEDIUM | 8.6 HIGH |
| A vulnerability in the application server of the Cisco Unified Customer Voice Portal (CVP) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to malformed SIP INVITE traffic received on the CVP during communications with the Cisco Virtualized Voice Browser (VVB). An attacker could exploit this vulnerability by sending malformed SIP INVITE traffic to the targeted appliance. An exploit could allow the attacker to impact the availability of services and data on the device, causing a DoS condition. This vulnerability affects Cisco Unified CVP running any software release prior to 11.6(1). Cisco Bug IDs: CSCve85840. | |||||
| CVE-2018-0048 | 1 Juniper | 1 Junos | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the Routing Protocols Daemon (RPD) with Juniper Extension Toolkit (JET) support can allow a network based unauthenticated attacker to cause a severe memory exhaustion condition on the device. This can have an adverse impact on the system performance and availability. This issue only affects devices with JET support running Junos OS 17.2R1 and subsequent releases. Other versions of Junos OS are unaffected by this vulnerability. Affected releases are Juniper Networks Junos OS: 17.2 versions prior to 17.2R1-S7, 17.2R2-S6, 17.2R3; 17.2X75 versions prior to 17.2X75-D102, 17.2X75-D110; 17.3 versions prior to 17.3R2-S4, 17.3R3; 17.4 versions prior to 17.4R1-S5, 17.4R2; 18.1 versions prior to 18.1R2-S3, 18.1R3; | |||||
| CVE-2018-0030 | 1 Juniper | 1 Junos | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| Receipt of a specific MPLS packet may cause MPC7/8/9, PTX-FPC3 (FPC-P1, FPC-P2) line cards or PTX1K to crash and restart. By continuously sending specific MPLS packets, an attacker can repeatedly crash the line cards or PTX1K causing a sustained Denial of Service. Affected releases are Juniper Networks Junos OS with MPC7/8/9 or PTX-FPC3 (FPC-P1, FPC-P2) installed and PTX1K: 15.1F versions prior to 15.1F6-S10; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 16.1 versions prior to 16.1R3-S8, 16.1R4-S9, 16.1R5-S4, 16.1R6-S3, 16.1R7; 16.1X65 versions prior to 16.1X65-D46; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S4, 17.2R2-S4, 17.2R3; 17.2X75 versions prior to 17.2X75-D70, 17.2X75-D90; 17.3 versions prior to 17.3R1-S4, 17.3R2, 17.4 versions prior to 17.4R1-S2, 17.4R2. Refer to KB25385 for more information about PFE line cards. | |||||