Filtered by vendor Linux
Subscribe
Total
10204 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-48916 | 1 Linux | 1 Linux Kernel | 2024-09-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix double list_add when enabling VMD in scalable mode When enabling VMD and IOMMU scalable mode, the following kernel panic call trace/kernel log is shown in Eagle Stream platform (Sapphire Rapids CPU) during booting: pci 0000:59:00.5: Adding to iommu group 42 ... vmd 0000:59:00.5: PCI host bridge to bus 10000:80 pci 10000:80:01.0: [8086:352a] type 01 class 0x060400 pci 10000:80:01.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] pci 10000:80:01.0: enabling Extended Tags pci 10000:80:01.0: PME# supported from D0 D3hot D3cold pci 10000:80:01.0: DMAR: Setup RID2PASID failed pci 10000:80:01.0: Failed to add to iommu group 42: -16 pci 10000:80:03.0: [8086:352b] type 01 class 0x060400 pci 10000:80:03.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] pci 10000:80:03.0: enabling Extended Tags pci 10000:80:03.0: PME# supported from D0 D3hot D3cold ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:29! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.17.0-rc3+ #7 Hardware name: Lenovo ThinkSystem SR650V3/SB27A86647, BIOS ESE101Y-1.00 01/13/2022 Workqueue: events work_for_cpu_fn RIP: 0010:__list_add_valid.cold+0x26/0x3f Code: 9a 4a ab ff 4c 89 c1 48 c7 c7 40 0c d9 9e e8 b9 b1 fe ff 0f 0b 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 f0 0c d9 9e e8 a2 b1 fe ff <0f> 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 98 0c d9 9e e8 8b b1 fe RSP: 0000:ff5ad434865b3a40 EFLAGS: 00010246 RAX: 0000000000000058 RBX: ff4d61160b74b880 RCX: ff4d61255e1fffa8 RDX: 0000000000000000 RSI: 00000000fffeffff RDI: ffffffff9fd34f20 RBP: ff4d611d8e245c00 R08: 0000000000000000 R09: ff5ad434865b3888 R10: ff5ad434865b3880 R11: ff4d61257fdc6fe8 R12: ff4d61160b74b8a0 R13: ff4d61160b74b8a0 R14: ff4d611d8e245c10 R15: ff4d611d8001ba70 FS: 0000000000000000(0000) GS:ff4d611d5ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ff4d611fa1401000 CR3: 0000000aa0210001 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> intel_pasid_alloc_table+0x9c/0x1d0 dmar_insert_one_dev_info+0x423/0x540 ? device_to_iommu+0x12d/0x2f0 intel_iommu_attach_device+0x116/0x290 __iommu_attach_device+0x1a/0x90 iommu_group_add_device+0x190/0x2c0 __iommu_probe_device+0x13e/0x250 iommu_probe_device+0x24/0x150 iommu_bus_notifier+0x69/0x90 blocking_notifier_call_chain+0x5a/0x80 device_add+0x3db/0x7b0 ? arch_memremap_can_ram_remap+0x19/0x50 ? memremap+0x75/0x140 pci_device_add+0x193/0x1d0 pci_scan_single_device+0xb9/0xf0 pci_scan_slot+0x4c/0x110 pci_scan_child_bus_extend+0x3a/0x290 vmd_enable_domain.constprop.0+0x63e/0x820 vmd_probe+0x163/0x190 local_pci_probe+0x42/0x80 work_for_cpu_fn+0x13/0x20 process_one_work+0x1e2/0x3b0 worker_thread+0x1c4/0x3a0 ? rescuer_thread+0x370/0x370 kthread+0xc7/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- ... Kernel panic - not syncing: Fatal exception Kernel Offset: 0x1ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- The following 'lspci' output shows devices '10000:80:*' are subdevices of the VMD device 0000:59:00.5: $ lspci ... 0000:59:00.5 RAID bus controller: Intel Corporation Volume Management Device NVMe RAID Controller (rev 20) ... 10000:80:01.0 PCI bridge: Intel Corporation Device 352a (rev 03) 10000:80:03.0 PCI bridge: Intel Corporation Device 352b (rev 03) 10000:80:05.0 PCI bridge: Intel Corporation Device 352c (rev 03) 10000:80:07.0 PCI bridge: Intel Corporation Device 352d (rev 03) 10000:81:00.0 Non-Volatile memory controller: Intel Corporation NVMe Datacenter SSD [3DNAND, Beta Rock Controller] 10000:82:00 ---truncated--- | |||||
| CVE-2022-48917 | 1 Linux | 1 Linux Kernel | 2024-09-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: ops: Shift tested values in snd_soc_put_volsw() by +min While the $val/$val2 values passed in from userspace are always >= 0 integers, the limits of the control can be signed integers and the $min can be non-zero and less than zero. To correctly validate $val/$val2 against platform_max, add the $min offset to val first. | |||||
| CVE-2022-48920 | 1 Linux | 1 Linux Kernel | 2024-09-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: get rid of warning on transaction commit when using flushoncommit When using the flushoncommit mount option, during almost every transaction commit we trigger a warning from __writeback_inodes_sb_nr(): $ cat fs/fs-writeback.c: (...) static void __writeback_inodes_sb_nr(struct super_block *sb, ... { (...) WARN_ON(!rwsem_is_locked(&sb->s_umount)); (...) } (...) The trace produced in dmesg looks like the following: [947.473890] WARNING: CPU: 5 PID: 930 at fs/fs-writeback.c:2610 __writeback_inodes_sb_nr+0x7e/0xb3 [947.481623] Modules linked in: nfsd nls_cp437 cifs asn1_decoder cifs_arc4 fscache cifs_md4 ipmi_ssif [947.489571] CPU: 5 PID: 930 Comm: btrfs-transacti Not tainted 95.16.3-srb-asrock-00001-g36437ad63879 #186 [947.497969] RIP: 0010:__writeback_inodes_sb_nr+0x7e/0xb3 [947.502097] Code: 24 10 4c 89 44 24 18 c6 (...) [947.519760] RSP: 0018:ffffc90000777e10 EFLAGS: 00010246 [947.523818] RAX: 0000000000000000 RBX: 0000000000963300 RCX: 0000000000000000 [947.529765] RDX: 0000000000000000 RSI: 000000000000fa51 RDI: ffffc90000777e50 [947.535740] RBP: ffff888101628a90 R08: ffff888100955800 R09: ffff888100956000 [947.541701] R10: 0000000000000002 R11: 0000000000000001 R12: ffff888100963488 [947.547645] R13: ffff888100963000 R14: ffff888112fb7200 R15: ffff888100963460 [947.553621] FS: 0000000000000000(0000) GS:ffff88841fd40000(0000) knlGS:0000000000000000 [947.560537] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [947.565122] CR2: 0000000008be50c4 CR3: 000000000220c000 CR4: 00000000001006e0 [947.571072] Call Trace: [947.572354] <TASK> [947.573266] btrfs_commit_transaction+0x1f1/0x998 [947.576785] ? start_transaction+0x3ab/0x44e [947.579867] ? schedule_timeout+0x8a/0xdd [947.582716] transaction_kthread+0xe9/0x156 [947.585721] ? btrfs_cleanup_transaction.isra.0+0x407/0x407 [947.590104] kthread+0x131/0x139 [947.592168] ? set_kthread_struct+0x32/0x32 [947.595174] ret_from_fork+0x22/0x30 [947.597561] </TASK> [947.598553] ---[ end trace 644721052755541c ]--- This is because we started using writeback_inodes_sb() to flush delalloc when committing a transaction (when using -o flushoncommit), in order to avoid deadlocks with filesystem freeze operations. This change was made by commit ce8ea7cc6eb313 ("btrfs: don't call btrfs_start_delalloc_roots in flushoncommit"). After that change we started producing that warning, and every now and then a user reports this since the warning happens too often, it spams dmesg/syslog, and a user is unsure if this reflects any problem that might compromise the filesystem's reliability. We can not just lock the sb->s_umount semaphore before calling writeback_inodes_sb(), because that would at least deadlock with filesystem freezing, since at fs/super.c:freeze_super() sync_filesystem() is called while we are holding that semaphore in write mode, and that can trigger a transaction commit, resulting in a deadlock. It would also trigger the same type of deadlock in the unmount path. Possibly, it could also introduce some other locking dependencies that lockdep would report. To fix this call try_to_writeback_inodes_sb() instead of writeback_inodes_sb(), because that will try to read lock sb->s_umount and then will only call writeback_inodes_sb() if it was able to lock it. This is fine because the cases where it can't read lock sb->s_umount are during a filesystem unmount or during a filesystem freeze - in those cases sb->s_umount is write locked and sync_filesystem() is called, which calls writeback_inodes_sb(). In other words, in all cases where we can't take a read lock on sb->s_umount, writeback is already being triggered elsewhere. An alternative would be to call btrfs_start_delalloc_roots() with a number of pages different from LONG_MAX, for example matching the number of delalloc bytes we currently have, in ---truncated--- | |||||
| CVE-2022-48921 | 1 Linux | 1 Linux Kernel | 2024-09-12 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: sched/fair: Fix fault in reweight_entity Syzbot found a GPF in reweight_entity. This has been bisected to commit 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") There is a race between sched_post_fork() and setpriority(PRIO_PGRP) within a thread group that causes a null-ptr-deref in reweight_entity() in CFS. The scenario is that the main process spawns number of new threads, which then call setpriority(PRIO_PGRP, 0, -20), wait, and exit. For each of the new threads the copy_process() gets invoked, which adds the new task_struct and calls sched_post_fork() for it. In the above scenario there is a possibility that setpriority(PRIO_PGRP) and set_one_prio() will be called for a thread in the group that is just being created by copy_process(), and for which the sched_post_fork() has not been executed yet. This will trigger a null pointer dereference in reweight_entity(), as it will try to access the run queue pointer, which hasn't been set. Before the mentioned change the cfs_rq pointer for the task has been set in sched_fork(), which is called much earlier in copy_process(), before the new task is added to the thread_group. Now it is done in the sched_post_fork(), which is called after that. To fix the issue the remove the update_load param from the update_load param() function and call reweight_task() only if the task flag doesn't have the TASK_NEW flag set. | |||||
| CVE-2022-48922 | 1 Linux | 1 Linux Kernel | 2024-09-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: riscv: fix oops caused by irqsoff latency tracer The trace_hardirqs_{on,off}() require the caller to setup frame pointer properly. This because these two functions use macro 'CALLER_ADDR1' (aka. __builtin_return_address(1)) to acquire caller info. If the $fp is used for other purpose, the code generated this macro (as below) could trigger memory access fault. 0xffffffff8011510e <+80>: ld a1,-16(s0) 0xffffffff80115112 <+84>: ld s2,-8(a1) # <-- paging fault here The oops message during booting if compiled with 'irqoff' tracer enabled: [ 0.039615][ T0] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8 [ 0.041925][ T0] Oops [#1] [ 0.042063][ T0] Modules linked in: [ 0.042864][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-rc1-00233-g9a20c48d1ed2 #29 [ 0.043568][ T0] Hardware name: riscv-virtio,qemu (DT) [ 0.044343][ T0] epc : trace_hardirqs_on+0x56/0xe2 [ 0.044601][ T0] ra : restore_all+0x12/0x6e [ 0.044721][ T0] epc : ffffffff80126a5c ra : ffffffff80003b94 sp : ffffffff81403db0 [ 0.044801][ T0] gp : ffffffff8163acd8 tp : ffffffff81414880 t0 : 0000000000000020 [ 0.044882][ T0] t1 : 0098968000000000 t2 : 0000000000000000 s0 : ffffffff81403de0 [ 0.044967][ T0] s1 : 0000000000000000 a0 : 0000000000000001 a1 : 0000000000000100 [ 0.045046][ T0] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.045124][ T0] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45 [ 0.045210][ T0] s2 : ffffffff80003b94 s3 : ffffffff81a8f1b0 s4 : ffffffff80e27b50 [ 0.045289][ T0] s5 : ffffffff81414880 s6 : ffffffff8160fa00 s7 : 00000000800120e8 [ 0.045389][ T0] s8 : 0000000080013100 s9 : 000000000000007f s10: 0000000000000000 [ 0.045474][ T0] s11: 0000000000000000 t3 : 7fffffffffffffff t4 : 0000000000000000 [ 0.045548][ T0] t5 : 0000000000000000 t6 : ffffffff814aa368 [ 0.045620][ T0] status: 0000000200000100 badaddr: 00000000000000f8 cause: 000000000000000d [ 0.046402][ T0] [<ffffffff80003b94>] restore_all+0x12/0x6e This because the $fp(aka. $s0) register is not used as frame pointer in the assembly entry code. resume_kernel: REG_L s0, TASK_TI_PREEMPT_COUNT(tp) bnez s0, restore_all REG_L s0, TASK_TI_FLAGS(tp) andi s0, s0, _TIF_NEED_RESCHED beqz s0, restore_all call preempt_schedule_irq j restore_all To fix above issue, here we add one extra level wrapper for function trace_hardirqs_{on,off}() so they can be safely called by low level entry code. | |||||
| CVE-2022-48923 | 1 Linux | 1 Linux Kernel | 2024-09-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: prevent copying too big compressed lzo segment Compressed length can be corrupted to be a lot larger than memory we have allocated for buffer. This will cause memcpy in copy_compressed_segment to write outside of allocated memory. This mostly results in stuck read syscall but sometimes when using btrfs send can get #GP kernel: general protection fault, probably for non-canonical address 0x841551d5c1000: 0000 [#1] PREEMPT SMP NOPTI kernel: CPU: 17 PID: 264 Comm: kworker/u256:7 Tainted: P OE 5.17.0-rc2-1 #12 kernel: Workqueue: btrfs-endio btrfs_work_helper [btrfs] kernel: RIP: 0010:lzo_decompress_bio (./include/linux/fortify-string.h:225 fs/btrfs/lzo.c:322 fs/btrfs/lzo.c:394) btrfs Code starting with the faulting instruction =========================================== 0:* 48 8b 06 mov (%rsi),%rax <-- trapping instruction 3: 48 8d 79 08 lea 0x8(%rcx),%rdi 7: 48 83 e7 f8 and $0xfffffffffffffff8,%rdi b: 48 89 01 mov %rax,(%rcx) e: 44 89 f0 mov %r14d,%eax 11: 48 8b 54 06 f8 mov -0x8(%rsi,%rax,1),%rdx kernel: RSP: 0018:ffffb110812efd50 EFLAGS: 00010212 kernel: RAX: 0000000000001000 RBX: 000000009ca264c8 RCX: ffff98996e6d8ff8 kernel: RDX: 0000000000000064 RSI: 000841551d5c1000 RDI: ffffffff9500435d kernel: RBP: ffff989a3be856c0 R08: 0000000000000000 R09: 0000000000000000 kernel: R10: 0000000000000000 R11: 0000000000001000 R12: ffff98996e6d8000 kernel: R13: 0000000000000008 R14: 0000000000001000 R15: 000841551d5c1000 kernel: FS: 0000000000000000(0000) GS:ffff98a09d640000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00001e9f984d9ea8 CR3: 000000014971a000 CR4: 00000000003506e0 kernel: Call Trace: kernel: <TASK> kernel: end_compressed_bio_read (fs/btrfs/compression.c:104 fs/btrfs/compression.c:1363 fs/btrfs/compression.c:323) btrfs kernel: end_workqueue_fn (fs/btrfs/disk-io.c:1923) btrfs kernel: btrfs_work_helper (fs/btrfs/async-thread.c:326) btrfs kernel: process_one_work (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:212 ./include/trace/events/workqueue.h:108 kernel/workqueue.c:2312) kernel: worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2455) kernel: ? process_one_work (kernel/workqueue.c:2397) kernel: kthread (kernel/kthread.c:377) kernel: ? kthread_complete_and_exit (kernel/kthread.c:332) kernel: ret_from_fork (arch/x86/entry/entry_64.S:301) kernel: </TASK> | |||||
| CVE-2024-44974 | 1 Linux | 1 Linux Kernel | 2024-09-12 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: avoid possible UaF when selecting endp select_local_address() and select_signal_address() both select an endpoint entry from the list inside an RCU protected section, but return a reference to it, to be read later on. If the entry is dereferenced after the RCU unlock, reading info could cause a Use-after-Free. A simple solution is to copy the required info while inside the RCU protected section to avoid any risk of UaF later. The address ID might need to be modified later to handle the ID0 case later, so a copy seems OK to deal with. | |||||
| CVE-2024-43905 | 1 Linux | 1 Linux Kernel | 2024-09-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Fix the null pointer dereference for vega10_hwmgr Check return value and conduct null pointer handling to avoid null pointer dereference. | |||||
| CVE-2024-43897 | 1 Linux | 1 Linux Kernel | 2024-09-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: drop bad gso csum_start and offset in virtio_net_hdr Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb for GSO packets. The function already checks that a checksum requested with VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets this might not hold for segs after segmentation. Syzkaller demonstrated to reach this warning in skb_checksum_help offset = skb_checksum_start_offset(skb); ret = -EINVAL; if (WARN_ON_ONCE(offset >= skb_headlen(skb))) By injecting a TSO packet: WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0 ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774 ip_finish_output_gso net/ipv4/ip_output.c:279 [inline] __ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301 iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4850 [inline] netdev_start_xmit include/linux/netdevice.h:4864 [inline] xmit_one net/core/dev.c:3595 [inline] dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611 __dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261 packet_snd net/packet/af_packet.c:3073 [inline] The geometry of the bad input packet at tcp_gso_segment: [ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0 [ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244 [ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0)) [ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536 ip_summed=3 complete_sw=0 valid=0 level=0) Mitigate with stricter input validation. csum_offset: for GSO packets, deduce the correct value from gso_type. This is already done for USO. Extend it to TSO. Let UFO be: udp[46]_ufo_fragment ignores these fields and always computes the checksum in software. csum_start: finding the real offset requires parsing to the transport header. Do not add a parser, use existing segmentation parsing. Thanks to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded. Again test both TSO and USO. Do not test UFO for the above reason, and do not test UDP tunnel offload. GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit from devices with no checksum offload"), but then still these fields are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no need to test for ip_summed == CHECKSUM_PARTIAL first. This revises an existing fix mentioned in the Fixes tag, which broke small packets with GSO offload, as detected by kselftests. | |||||
| CVE-2024-43892 | 1 Linux | 1 Linux Kernel | 2024-09-12 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: memcg: protect concurrent access to mem_cgroup_idr Commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after many small jobs") decoupled the memcg IDs from the CSS ID space to fix the cgroup creation failures. It introduced IDR to maintain the memcg ID space. The IDR depends on external synchronization mechanisms for modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace() happen within css callback and thus are protected through cgroup_mutex from concurrent modifications. However idr_remove() for mem_cgroup_idr was not protected against concurrency and can be run concurrently for different memcgs when they hit their refcnt to zero. Fix that. We have been seeing list_lru based kernel crashes at a low frequency in our fleet for a long time. These crashes were in different part of list_lru code including list_lru_add(), list_lru_del() and reparenting code. Upon further inspection, it looked like for a given object (dentry and inode), the super_block's list_lru didn't have list_lru_one for the memcg of that object. The initial suspicions were either the object is not allocated through kmem_cache_alloc_lru() or somehow memcg_list_lru_alloc() failed to allocate list_lru_one() for a memcg but returned success. No evidence were found for these cases. Looking more deeply, we started seeing situations where valid memcg's id is not present in mem_cgroup_idr and in some cases multiple valid memcgs have same id and mem_cgroup_idr is pointing to one of them. So, the most reasonable explanation is that these situations can happen due to race between multiple idr_remove() calls or race between idr_alloc()/idr_replace() and idr_remove(). These races are causing multiple memcgs to acquire the same ID and then offlining of one of them would cleanup list_lrus on the system for all of them. Later access from other memcgs to the list_lru cause crashes due to missing list_lru_one. | |||||
| CVE-2024-43854 | 1 Linux | 1 Linux Kernel | 2024-09-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: block: initialize integrity buffer to zero before writing it to media Metadata added by bio_integrity_prep is using plain kmalloc, which leads to random kernel memory being written media. For PI metadata this is limited to the app tag that isn't used by kernel generated metadata, but for non-PI metadata the entire buffer leaks kernel memory. Fix this by adding the __GFP_ZERO flag to allocations for writes. | |||||
| CVE-2024-42246 | 1 Linux | 1 Linux Kernel | 2024-09-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net, sunrpc: Remap EPERM in case of connection failure in xs_tcp_setup_socket When using a BPF program on kernel_connect(), the call can return -EPERM. This causes xs_tcp_setup_socket() to loop forever, filling up the syslog and causing the kernel to potentially freeze up. Neil suggested: This will propagate -EPERM up into other layers which might not be ready to handle it. It might be safer to map EPERM to an error we would be more likely to expect from the network system - such as ECONNREFUSED or ENETDOWN. ECONNREFUSED as error seems reasonable. For programs setting a different error can be out of reach (see handling in 4fbac77d2d09) in particular on kernels which do not have f10d05966196 ("bpf: Make BPF_PROG_RUN_ARRAY return -err instead of allow boolean"), thus given that it is better to simply remap for consistent behavior. UDP does handle EPERM in xs_udp_send_request(). | |||||
| CVE-2021-4441 | 1 Linux | 1 Linux Kernel | 2024-09-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op() In zynq_qspi_exec_mem_op(), kzalloc() is directly used in memset(), which could lead to a NULL pointer dereference on failure of kzalloc(). Fix this bug by adding a check of tmpbuf. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_SPI_ZYNQ_QSPI=m show no new warnings, and our static analyzer no longer warns about this code. | |||||
| CVE-2023-52896 | 1 Linux | 1 Linux Kernel | 2024-09-11 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race between quota rescan and disable leading to NULL pointer deref If we have one task trying to start the quota rescan worker while another one is trying to disable quotas, we can end up hitting a race that results in the quota rescan worker doing a NULL pointer dereference. The steps for this are the following: 1) Quotas are enabled; 2) Task A calls the quota rescan ioctl and enters btrfs_qgroup_rescan(). It calls qgroup_rescan_init() which returns 0 (success) and then joins a transaction and commits it; 3) Task B calls the quota disable ioctl and enters btrfs_quota_disable(). It clears the bit BTRFS_FS_QUOTA_ENABLED from fs_info->flags and calls btrfs_qgroup_wait_for_completion(), which returns immediately since the rescan worker is not yet running. Then it starts a transaction and locks fs_info->qgroup_ioctl_lock; 4) Task A queues the rescan worker, by calling btrfs_queue_work(); 5) The rescan worker starts, and calls rescan_should_stop() at the start of its while loop, which results in 0 iterations of the loop, since the flag BTRFS_FS_QUOTA_ENABLED was cleared from fs_info->flags by task B at step 3); 6) Task B sets fs_info->quota_root to NULL; 7) The rescan worker tries to start a transaction and uses fs_info->quota_root as the root argument for btrfs_start_transaction(). This results in a NULL pointer dereference down the call chain of btrfs_start_transaction(). The stack trace is something like the one reported in Link tag below: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f] CPU: 1 PID: 34 Comm: kworker/u4:2 Not tainted 6.1.0-syzkaller-13872-gb6bb9676f216 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Workqueue: btrfs-qgroup-rescan btrfs_work_helper RIP: 0010:start_transaction+0x48/0x10f0 fs/btrfs/transaction.c:564 Code: 48 89 fb 48 (...) RSP: 0018:ffffc90000ab7ab0 EFLAGS: 00010206 RAX: 0000000000000041 RBX: 0000000000000208 RCX: ffff88801779ba80 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: dffffc0000000000 R08: 0000000000000001 R09: fffff52000156f5d R10: fffff52000156f5d R11: 1ffff92000156f5c R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2bea75b718 CR3: 000000001d0cc000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> btrfs_qgroup_rescan_worker+0x3bb/0x6a0 fs/btrfs/qgroup.c:3402 btrfs_work_helper+0x312/0x850 fs/btrfs/async-thread.c:280 process_one_work+0x877/0xdb0 kernel/workqueue.c:2289 worker_thread+0xb14/0x1330 kernel/workqueue.c:2436 kthread+0x266/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 </TASK> Modules linked in: So fix this by having the rescan worker function not attempt to start a transaction if it didn't do any rescan work. | |||||
| CVE-2023-52895 | 1 Linux | 1 Linux Kernel | 2024-09-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/poll: don't reissue in case of poll race on multishot request A previous commit fixed a poll race that can occur, but it's only applicable for multishot requests. For a multishot request, we can safely ignore a spurious wakeup, as we never leave the waitqueue to begin with. A blunt reissue of a multishot armed request can cause us to leak a buffer, if they are ring provided. While this seems like a bug in itself, it's not really defined behavior to reissue a multishot request directly. It's less efficient to do so as well, and not required to rearm anything like it is for singleshot poll requests. | |||||
| CVE-2023-52894 | 1 Linux | 1 Linux Kernel | 2024-09-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate() In Google internal bug 265639009 we've received an (as yet) unreproducible crash report from an aarch64 GKI 5.10.149-android13 running device. AFAICT the source code is at: https://android.googlesource.com/kernel/common/+/refs/tags/ASB-2022-12-05_13-5.10 The call stack is: ncm_close() -> ncm_notify() -> ncm_do_notify() with the crash at: ncm_do_notify+0x98/0x270 Code: 79000d0b b9000a6c f940012a f9400269 (b9405d4b) Which I believe disassembles to (I don't know ARM assembly, but it looks sane enough to me...): // halfword (16-bit) store presumably to event->wLength (at offset 6 of struct usb_cdc_notification) 0B 0D 00 79 strh w11, [x8, #6] // word (32-bit) store presumably to req->Length (at offset 8 of struct usb_request) 6C 0A 00 B9 str w12, [x19, #8] // x10 (NULL) was read here from offset 0 of valid pointer x9 // IMHO we're reading 'cdev->gadget' and getting NULL // gadget is indeed at offset 0 of struct usb_composite_dev 2A 01 40 F9 ldr x10, [x9] // loading req->buf pointer, which is at offset 0 of struct usb_request 69 02 40 F9 ldr x9, [x19] // x10 is null, crash, appears to be attempt to read cdev->gadget->max_speed 4B 5D 40 B9 ldr w11, [x10, #0x5c] which seems to line up with ncm_do_notify() case NCM_NOTIFY_SPEED code fragment: event->wLength = cpu_to_le16(8); req->length = NCM_STATUS_BYTECOUNT; /* SPEED_CHANGE data is up/down speeds in bits/sec */ data = req->buf + sizeof *event; data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); My analysis of registers and NULL ptr deref crash offset (Unable to handle kernel NULL pointer dereference at virtual address 000000000000005c) heavily suggests that the crash is due to 'cdev->gadget' being NULL when executing: data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); which calls: ncm_bitrate(NULL) which then calls: gadget_is_superspeed(NULL) which reads ((struct usb_gadget *)NULL)->max_speed and hits a panic. AFAICT, if I'm counting right, the offset of max_speed is indeed 0x5C. (remember there's a GKI KABI reservation of 16 bytes in struct work_struct) It's not at all clear to me how this is all supposed to work... but returning 0 seems much better than panic-ing... | |||||
| CVE-2023-52893 | 1 Linux | 1 Linux Kernel | 2024-09-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: gsmi: fix null-deref in gsmi_get_variable We can get EFI variables without fetching the attribute, so we must allow for that in gsmi. commit 859748255b43 ("efi: pstore: Omit efivars caching EFI varstore access layer") added a new get_variable call with attr=NULL, which triggers panic in gsmi. | |||||
| CVE-2022-48899 | 1 Linux | 1 Linux Kernel | 2024-09-11 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix GEM handle creation UAF Userspace can guess the handle value and try to race GEM object creation with handle close, resulting in a use-after-free if we dereference the object after dropping the handle's reference. For that reason, dropping the handle's reference must be done *after* we are done dereferencing the object. | |||||
| CVE-2022-48898 | 1 Linux | 1 Linux Kernel | 2024-09-11 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: do not complete dp_aux_cmd_fifo_tx() if irq is not for aux transfer There are 3 possible interrupt sources are handled by DP controller, HPDstatus, Controller state changes and Aux read/write transaction. At every irq, DP controller have to check isr status of every interrupt sources and service the interrupt if its isr status bits shows interrupts are pending. There is potential race condition may happen at current aux isr handler implementation since it is always complete dp_aux_cmd_fifo_tx() even irq is not for aux read or write transaction. This may cause aux read transaction return premature if host aux data read is in the middle of waiting for sink to complete transferring data to host while irq happen. This will cause host's receiving buffer contains unexpected data. This patch fixes this problem by checking aux isr and return immediately at aux isr handler if there are no any isr status bits set. Current there is a bug report regrading eDP edid corruption happen during system booting up. After lengthy debugging to found that VIDEO_READY interrupt was continuously firing during system booting up which cause dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data from aux hardware buffer which is not yet contains complete data transfer from sink. This cause edid corruption. Follows are the signature at kernel logs when problem happen, EDID has corrupt header panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID Changes in v2: -- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr() -- add more commit text Changes in v3: -- add Stephen suggested -- dp_aux_isr() return IRQ_XXX back to caller -- dp_ctrl_isr() return IRQ_XXX back to caller Changes in v4: -- split into two patches Changes in v5: -- delete empty line between tags Changes in v6: -- remove extra "that" and fixed line more than 75 char at commit text Patchwork: https://patchwork.freedesktop.org/patch/516121/ | |||||
| CVE-2022-48897 | 1 Linux | 1 Linux Kernel | 2024-09-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: arm64/mm: fix incorrect file_map_count for invalid pmd The page table check trigger BUG_ON() unexpectedly when split hugepage: ------------[ cut here ]------------ kernel BUG at mm/page_table_check.c:119! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 7 PID: 210 Comm: transhuge-stres Not tainted 6.1.0-rc3+ #748 Hardware name: linux,dummy-virt (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : page_table_check_set.isra.0+0x398/0x468 lr : page_table_check_set.isra.0+0x1c0/0x468 [...] Call trace: page_table_check_set.isra.0+0x398/0x468 __page_table_check_pte_set+0x160/0x1c0 __split_huge_pmd_locked+0x900/0x1648 __split_huge_pmd+0x28c/0x3b8 unmap_page_range+0x428/0x858 unmap_single_vma+0xf4/0x1c8 zap_page_range+0x2b0/0x410 madvise_vma_behavior+0xc44/0xe78 do_madvise+0x280/0x698 __arm64_sys_madvise+0x90/0xe8 invoke_syscall.constprop.0+0xdc/0x1d8 do_el0_svc+0xf4/0x3f8 el0_svc+0x58/0x120 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x19c/0x1a0 [...] On arm64, pmd_leaf() will return true even if the pmd is invalid due to pmd_present_invalid() check. So in pmdp_invalidate() the file_map_count will not only decrease once but also increase once. Then in set_pte_at(), the file_map_count increase again, and so trigger BUG_ON() unexpectedly. Add !pmd_present_invalid() check in pmd_user_accessible_page() to fix the problem. | |||||