Total
5948 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-39496 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix use-after-free due to race with dev replace While loading a zone's info during creation of a block group, we can race with a device replace operation and then trigger a use-after-free on the device that was just replaced (source device of the replace operation). This happens because at btrfs_load_zone_info() we extract a device from the chunk map into a local variable and then use the device while not under the protection of the device replace rwsem. So if there's a device replace operation happening when we extract the device and that device is the source of the replace operation, we will trigger a use-after-free if before we finish using the device the replace operation finishes and frees the device. Fix this by enlarging the critical section under the protection of the device replace rwsem so that all uses of the device are done inside the critical section. | |||||
| CVE-2024-39495 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: greybus: Fix use-after-free bug in gb_interface_release due to race condition. In gb_interface_create, &intf->mode_switch_completion is bound with gb_interface_mode_switch_work. Then it will be started by gb_interface_request_mode_switch. Here is the relevant code. if (!queue_work(system_long_wq, &intf->mode_switch_work)) { ... } If we call gb_interface_release to make cleanup, there may be an unfinished work. This function will call kfree to free the object "intf". However, if gb_interface_mode_switch_work is scheduled to run after kfree, it may cause use-after-free error as gb_interface_mode_switch_work will use the object "intf". The possible execution flow that may lead to the issue is as follows: CPU0 CPU1 | gb_interface_create | gb_interface_request_mode_switch gb_interface_release | kfree(intf) (free) | | gb_interface_mode_switch_work | mutex_lock(&intf->mutex) (use) Fix it by canceling the work before kfree. | |||||
| CVE-2024-39494 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ima: Fix use-after-free on a dentry's dname.name ->d_name.name can change on rename and the earlier value can be freed; there are conditions sufficient to stabilize it (->d_lock on dentry, ->d_lock on its parent, ->i_rwsem exclusive on the parent's inode, rename_lock), but none of those are met at any of the sites. Take a stable snapshot of the name instead. | |||||
| CVE-2024-27397 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: use timestamp to check for set element timeout Add a timestamp field at the beginning of the transaction, store it in the nftables per-netns area. Update set backend .insert, .deactivate and sync gc path to use the timestamp, this avoids that an element expires while control plane transaction is still unfinished. .lookup and .update, which are used from packet path, still use the current time to check if the element has expired. And .get path and dump also since this runs lockless under rcu read size lock. Then, there is async gc which also needs to check the current time since it runs asynchronously from a workqueue. | |||||
| CVE-2024-25062 | 1 Xmlsoft | 1 Libxml2 | 2025-11-03 | N/A | 7.5 HIGH |
| An issue was discovered in libxml2 before 2.11.7 and 2.12.x before 2.12.5. When using the XML Reader interface with DTD validation and XInclude expansion enabled, processing crafted XML documents can lead to an xmlValidatePopElement use-after-free. | |||||
| CVE-2024-20952 | 3 Debian, Netapp, Oracle | 9 Debian Linux, Cloud Insights Acquisition Unit, Cloud Insights Storage Workload Security Agent and 6 more | 2025-11-03 | N/A | 7.4 HIGH |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Security). Supported versions that are affected are Oracle Java SE: 8u391, 8u391-perf, 11.0.21, 17.0.9, 21.0.1; Oracle GraalVM for JDK: 17.0.9, 21.0.1; Oracle GraalVM Enterprise Edition: 20.3.12, 21.3.8 and 22.3.4. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data as well as unauthorized access to critical data or complete access to all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 7.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N). | |||||
| CVE-2024-1454 | 3 Fedoraproject, Opensc Project, Redhat | 3 Fedora, Opensc, Enterprise Linux | 2025-11-03 | N/A | 3.4 LOW |
| The use-after-free vulnerability was found in the AuthentIC driver in OpenSC packages, occuring in the card enrolment process using pkcs15-init when a user or administrator enrols or modifies cards. An attacker must have physical access to the computer system and requires a crafted USB device or smart card to present the system with specially crafted responses to the APDUs, which are considered high complexity and low severity. This manipulation can allow for compromised card management operations during enrolment. | |||||
| CVE-2024-10459 | 1 Mozilla | 2 Firefox, Thunderbird | 2025-11-03 | N/A | 7.5 HIGH |
| An attacker could have caused a use-after-free when accessibility was enabled, leading to a potentially exploitable crash. This vulnerability affects Firefox < 132, Firefox ESR < 128.4, Firefox ESR < 115.17, Thunderbird < 128.4, and Thunderbird < 132. | |||||
| CVE-2023-52760 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in gfs2_qd_dealloc In gfs2_put_super(), whether withdrawn or not, the quota should be cleaned up by gfs2_quota_cleanup(). Otherwise, struct gfs2_sbd will be freed before gfs2_qd_dealloc (rcu callback) has run for all gfs2_quota_data objects, resulting in use-after-free. Also, gfs2_destroy_threads() and gfs2_quota_cleanup() is already called by gfs2_make_fs_ro(), so in gfs2_put_super(), after calling gfs2_make_fs_ro(), there is no need to call them again. | |||||
| CVE-2023-42950 | 1 Apple | 6 Ipados, Iphone Os, Macos and 3 more | 2025-11-03 | N/A | 8.8 HIGH |
| A use after free issue was addressed with improved memory management. This issue is fixed in Safari 17.2, iOS 17.2 and iPadOS 17.2, tvOS 17.2, watchOS 10.2, macOS Sonoma 14.2. Processing maliciously crafted web content may lead to arbitrary code execution. | |||||
| CVE-2022-48733 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free after failure to create a snapshot At ioctl.c:create_snapshot(), we allocate a pending snapshot structure and then attach it to the transaction's list of pending snapshots. After that we call btrfs_commit_transaction(), and if that returns an error we jump to 'fail' label, where we kfree() the pending snapshot structure. This can result in a later use-after-free of the pending snapshot: 1) We allocated the pending snapshot and added it to the transaction's list of pending snapshots; 2) We call btrfs_commit_transaction(), and it fails either at the first call to btrfs_run_delayed_refs() or btrfs_start_dirty_block_groups(). In both cases, we don't abort the transaction and we release our transaction handle. We jump to the 'fail' label and free the pending snapshot structure. We return with the pending snapshot still in the transaction's list; 3) Another task commits the transaction. This time there's no error at all, and then during the transaction commit it accesses a pointer to the pending snapshot structure that the snapshot creation task has already freed, resulting in a user-after-free. This issue could actually be detected by smatch, which produced the following warning: fs/btrfs/ioctl.c:843 create_snapshot() warn: '&pending_snapshot->list' not removed from list So fix this by not having the snapshot creation ioctl directly add the pending snapshot to the transaction's list. Instead add the pending snapshot to the transaction handle, and then at btrfs_commit_transaction() we add the snapshot to the list only when we can guarantee that any error returned after that point will result in a transaction abort, in which case the ioctl code can safely free the pending snapshot and no one can access it anymore. | |||||
| CVE-2022-45888 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 6.4 MEDIUM |
| An issue was discovered in the Linux kernel through 6.0.9. drivers/char/xillybus/xillyusb.c has a race condition and use-after-free during physical removal of a USB device. | |||||
| CVE-2022-3559 | 2 Exim, Fedoraproject | 2 Exim, Fedora | 2025-11-03 | N/A | 4.6 MEDIUM |
| A vulnerability was found in Exim and classified as problematic. This issue affects some unknown processing of the component Regex Handler. The manipulation leads to use after free. The name of the patch is 4e9ed49f8f12eb331b29bd5b6dc3693c520fddc2. It is recommended to apply a patch to fix this issue. The identifier VDB-211073 was assigned to this vulnerability. | |||||
| CVE-2022-0934 | 2 Redhat, Thekelleys | 2 Enterprise Linux, Dnsmasq | 2025-11-03 | N/A | 7.5 HIGH |
| A single-byte, non-arbitrary write/use-after-free flaw was found in dnsmasq. This flaw allows an attacker who sends a crafted packet processed by dnsmasq, potentially causing a denial of service. | |||||
| CVE-2022-0581 | 3 Debian, Fedoraproject, Wireshark | 3 Debian Linux, Fedora, Wireshark | 2025-11-03 | 5.0 MEDIUM | 6.3 MEDIUM |
| Crash in the CMS protocol dissector in Wireshark 3.6.0 to 3.6.1 and 3.4.0 to 3.4.11 allows denial of service via packet injection or crafted capture file | |||||
| CVE-2021-42779 | 3 Fedoraproject, Opensc Project, Redhat | 3 Fedora, Opensc, Enterprise Linux | 2025-11-03 | 5.0 MEDIUM | 5.3 MEDIUM |
| A heap use after free issue was found in Opensc before version 0.22.0 in sc_file_valid. | |||||
| CVE-2021-36976 | 4 Apple, Fedoraproject, Libarchive and 1 more | 7 Ipados, Iphone Os, Macos and 4 more | 2025-11-03 | 4.3 MEDIUM | 6.5 MEDIUM |
| libarchive 3.4.1 through 3.5.1 has a use-after-free in copy_string (called from do_uncompress_block and process_block). | |||||
| CVE-2021-36086 | 2 Fedoraproject, Selinux Project | 2 Fedora, Selinux | 2025-11-03 | 2.1 LOW | 3.3 LOW |
| The CIL compiler in SELinux 3.2 has a use-after-free in cil_reset_classpermission (called from cil_reset_classperms_set and cil_reset_classperms_list). | |||||
| CVE-2021-36085 | 2 Fedoraproject, Selinux Project | 2 Fedora, Selinux | 2025-11-03 | 2.1 LOW | 3.3 LOW |
| The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __verify_map_perm_classperms and hashtab_map). | |||||
| CVE-2021-36084 | 2 Fedoraproject, Selinux Project | 2 Fedora, Selinux | 2025-11-03 | 2.1 LOW | 3.3 LOW |
| The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __cil_verify_classpermission and __cil_pre_verify_helper). | |||||