Total
2532 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-26623 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pds_core: Prevent race issues involving the adminq There are multiple paths that can result in using the pdsc's adminq. [1] pdsc_adminq_isr and the resulting work from queue_work(), i.e. pdsc_work_thread()->pdsc_process_adminq() [2] pdsc_adminq_post() When the device goes through reset via PCIe reset and/or a fw_down/fw_up cycle due to bad PCIe state or bad device state the adminq is destroyed and recreated. A NULL pointer dereference can happen if [1] or [2] happens after the adminq is already destroyed. In order to fix this, add some further state checks and implement reference counting for adminq uses. Reference counting was used because multiple threads can attempt to access the adminq at the same time via [1] or [2]. Additionally, multiple clients (i.e. pds-vfio-pci) can be using [2] at the same time. The adminq_refcnt is initialized to 1 when the adminq has been allocated and is ready to use. Users/clients of the adminq (i.e. [1] and [2]) will increment the refcnt when they are using the adminq. When the driver goes into a fw_down cycle it will set the PDSC_S_FW_DEAD bit and then wait for the adminq_refcnt to hit 1. Setting the PDSC_S_FW_DEAD before waiting will prevent any further adminq_refcnt increments. Waiting for the adminq_refcnt to hit 1 allows for any current users of the adminq to finish before the driver frees the adminq. Once the adminq_refcnt hits 1 the driver clears the refcnt to signify that the adminq is deleted and cannot be used. On the fw_up cycle the driver will once again initialize the adminq_refcnt to 1 allowing the adminq to be used again. | |||||
| CVE-2025-21695 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-uart-backlight: fix serdev race The dell_uart_bl_serdev_probe() function calls devm_serdev_device_open() before setting the client ops via serdev_device_set_client_ops(). This ordering can trigger a NULL pointer dereference in the serdev controller's receive_buf handler, as it assumes serdev->ops is valid when SERPORT_ACTIVE is set. This is similar to the issue fixed in commit 5e700b384ec1 ("platform/chrome: cros_ec_uart: properly fix race condition") where devm_serdev_device_open() was called before fully initializing the device. Fix the race by ensuring client ops are set before enabling the port via devm_serdev_device_open(). Note, serdev_device_set_baudrate() and serdev_device_set_flow_control() calls should be after the devm_serdev_device_open() call. | |||||
| CVE-2024-24860 | 1 Linux | 1 Linux Kernel | 2025-02-13 | N/A | 4.6 MEDIUM |
| A race condition was found in the Linux kernel's bluetooth device driver in {min,max}_key_size_set() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue. | |||||
| CVE-2023-3316 | 1 Libtiff | 1 Libtiff | 2025-02-13 | N/A | 5.9 MEDIUM |
| A NULL pointer dereference in TIFFClose() is caused by a failure to open an output file (non-existent path or a path that requires permissions like /dev/null) while specifying zones. | |||||
| CVE-2023-51394 | 1 Silabs | 1 Emberznet | 2025-02-12 | N/A | 5.3 MEDIUM |
| High traffic environments may result in NULL Pointer Dereference vulnerability in Silicon Labs's Ember ZNet SDK before v7.4.0, causing a system crash. | |||||
| CVE-2022-24810 | 3 Debian, Fedoraproject, Net-snmp | 3 Debian Linux, Fedora, Net-snmp | 2025-02-11 | N/A | 6.5 MEDIUM |
| net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a user with read-write credentials can use a malformed OID in a SET to the nsVacmAccessTable to cause a NULL pointer dereference. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range. | |||||
| CVE-2024-50665 | 1 Gpac | 1 Gpac | 2025-02-11 | N/A | 5.5 MEDIUM |
| gpac 2.4 contains a SEGV at src/isomedia/drm_sample.c:1562:96 in isom_cenc_get_sai_by_saiz_saio in MP4Box. | |||||
| CVE-2022-47465 | 2 Google, Unisoc | 14 Android, S8000, Sc7731e and 11 more | 2025-02-11 | N/A | 5.5 MEDIUM |
| In vdsp service, there is a missing permission check. This could lead to local denial of service in vdsp service. | |||||
| CVE-2025-21685 | 1 Linux | 1 Linux Kernel | 2025-02-11 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: lenovo-yoga-tab2-pro-1380-fastcharger: fix serdev race The yt2_1380_fc_serdev_probe() function calls devm_serdev_device_open() before setting the client ops via serdev_device_set_client_ops(). This ordering can trigger a NULL pointer dereference in the serdev controller's receive_buf handler, as it assumes serdev->ops is valid when SERPORT_ACTIVE is set. This is similar to the issue fixed in commit 5e700b384ec1 ("platform/chrome: cros_ec_uart: properly fix race condition") where devm_serdev_device_open() was called before fully initializing the device. Fix the race by ensuring client ops are set before enabling the port via devm_serdev_device_open(). Note, serdev_device_set_baudrate() and serdev_device_set_flow_control() calls should be after the devm_serdev_device_open() call. | |||||
| CVE-2022-47468 | 2 Google, Unisoc | 14 Android, S8000, Sc7731e and 11 more | 2025-02-10 | N/A | 5.5 MEDIUM |
| In telecom service, there is a missing permission check. This could lead to local denial of service in telecom service. | |||||
| CVE-2022-47467 | 2 Google, Unisoc | 14 Android, S8000, Sc7731e and 11 more | 2025-02-10 | N/A | 5.5 MEDIUM |
| In telecom service, there is a missing permission check. This could lead to local denial of service in telecom service. | |||||
| CVE-2022-47466 | 2 Google, Unisoc | 14 Android, S8000, Sc7731e and 11 more | 2025-02-10 | N/A | 5.5 MEDIUM |
| In telecom service, there is a missing permission check. This could lead to local denial of service in telecom service. | |||||
| CVE-2024-53232 | 1 Linux | 1 Linux Kernel | 2025-02-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Implement blocking domain This fixes a crash when surprise hot-unplugging a PCI device. This crash happens because during hot-unplug __iommu_group_set_domain_nofail() attaching the default domain fails when the platform no longer recognizes the device as it has already been removed and we end up with a NULL domain pointer and UAF. This is exactly the case referred to in the second comment in __iommu_device_set_domain() and just as stated there if we can instead attach the blocking domain the UAF is prevented as this can handle the already removed device. Implement the blocking domain to use this handling. With this change, the crash is fixed but we still hit a warning attempting to change DMA ownership on a blocked device. | |||||
| CVE-2023-1994 | 1 Wireshark | 1 Wireshark | 2025-02-07 | N/A | 6.3 MEDIUM |
| GQUIC dissector crash in Wireshark 4.0.0 to 4.0.4 and 3.6.0 to 3.6.12 allows denial of service via packet injection or crafted capture file | |||||
| CVE-2023-29569 | 1 Cesanta | 1 Mjs | 2025-02-06 | N/A | 5.5 MEDIUM |
| Cesanta MJS v2.20.0 was discovered to contain a SEGV vulnerability via ffi_cb_impl_wpwwwww at src/mjs_ffi.c. This vulnerability can lead to a Denial of Service (DoS). | |||||
| CVE-2024-30403 | 1 Juniper | 1 Junos Os Evolved | 2025-02-06 | N/A | 6.5 MEDIUM |
| A NULL Pointer Dereference vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved allows an unauthenticated, adjacent attacker to cause a Denial of Service (DoS). When Layer 2 traffic is sent through a logical interface, MAC learning happens. If during this process, the interface flaps, an Advanced Forwarding Toolkit manager (evo-aftmand-bt) core is observed. This leads to a PFE restart. The crash reoccurs if the same sequence of events happens, which will lead to a sustained DoS condition. This issue affects Juniper Networks Junos OS Evolved 23.2-EVO versions earlier than 23.2R1-S1-EVO, 23.2R2-EVO. | |||||
| CVE-2023-21586 | 3 Adobe, Apple, Microsoft | 6 Acrobat, Acrobat Dc, Acrobat Reader and 3 more | 2025-02-06 | N/A | 5.5 MEDIUM |
| Adobe Acrobat Reader versions 22.003.20282 (and earlier), 22.003.20281 (and earlier) and 20.005.30418 (and earlier) are affected by a NULL Pointer Dereference vulnerability. An unauthenticated attacker could leverage this vulnerability to achieve an application denial-of-service in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | |||||
| CVE-2020-28163 | 1 Libdwarf Project | 1 Libdwarf | 2025-02-06 | N/A | 6.5 MEDIUM |
| libdwarf before 20201201 allows a dwarf_print_lines.c NULL pointer dereference and application crash via a DWARF5 line-table header that has an invalid FORM for a pathname. | |||||
| CVE-2025-24483 | 2025-02-06 | N/A | 6.5 MEDIUM | ||
| NULL pointer dereference vulnerability exists in Defense Platform Home Edition Ver.3.9.51.x and earlier. If an attacker provides specially crafted data to the specific process of the Windows system where the product is running, the system may cause a Blue Screen of Death (BSOD), and as a result, cause a denial-of-service (DoS) condition. | |||||
| CVE-2023-2166 | 1 Linux | 1 Linux Kernel | 2025-02-05 | N/A | 5.5 MEDIUM |
| A null pointer dereference issue was found in can protocol in net/can/af_can.c in the Linux before Linux. ml_priv may not be initialized in the receive path of CAN frames. A local user could use this flaw to crash the system or potentially cause a denial of service. | |||||