Total
12 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-5573 | 1 Dlink | 2 Dcs-932l, Dcs-932l Firmware | 2025-06-06 | 6.5 MEDIUM | 6.3 MEDIUM |
| A vulnerability was found in D-Link DCS-932L 2.18.01. It has been rated as critical. Affected by this issue is the function setSystemWizard/setSystemControl of the file /setSystemWizard. The manipulation of the argument AdminID leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. | |||||
| CVE-2025-5572 | 1 Dlink | 2 Dcs-932l, Dcs-932l Firmware | 2025-06-06 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. Affected by this vulnerability is the function setSystemEmail of the file /setSystemEmail. The manipulation of the argument EmailSMTPPortNumber leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. | |||||
| CVE-2025-4842 | 1 Dlink | 2 Dcs-932l, Dcs-932l Firmware | 2025-06-04 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. This vulnerability affects the function isUCPCameraNameChanged of the file /sbin/ucp. The manipulation of the argument CameraName leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. | |||||
| CVE-2025-4843 | 1 Dlink | 2 Dcs-932l, Dcs-932l Firmware | 2025-06-04 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability was found in D-Link DCS-932L 2.18.01. It has been classified as critical. This affects the function SubUPnPCSInit of the file /sbin/udev. The manipulation of the argument CameraName leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. | |||||
| CVE-2025-4841 | 1 Dlink | 2 Dcs-932l, Dcs-932l Firmware | 2025-06-03 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability was found in D-Link DCS-932L 2.18.01 and classified as critical. Affected by this issue is the function sub_404780 of the file /bin/gpio. The manipulation of the argument CameraName leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. | |||||
| CVE-2024-37606 | 1 Dlink | 2 Dcs-932l, Dcs-932l Firmware | 2025-05-21 | N/A | 6.5 MEDIUM |
| A Stack overflow vulnerability in D-Link DCS-932L REVB_FIRMWARE_2.18.01 allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request. | |||||
| CVE-2017-7852 | 1 Dlink | 52 Dcs-2132l, Dcs-2132l Firmware, Dcs-2136l and 49 more | 2025-04-20 | 6.8 MEDIUM | 8.8 HIGH |
| D-Link DCS cameras have a weak/insecure CrossDomain.XML file that allows sites hosting malicious Flash objects to access and/or change the device's settings via a CSRF attack. This is because of the 'allow-access-from domain' child element set to *, thus accepting requests from any domain. If a victim logged into the camera's web console visits a malicious site hosting a malicious Flash file from another Browser tab, the malicious Flash file then can send requests to the victim's DCS series Camera without knowing the credentials. An attacker can host a malicious Flash file that can retrieve Live Feeds or information from the victim's DCS series Camera, add new admin users, or make other changes to the device. Known affected devices are DCS-933L with firmware before 1.13.05, DCS-5030L, DCS-5020L, DCS-2530L, DCS-2630L, DCS-930L, DCS-932L, and DCS-932LB1. | |||||
| CVE-2012-4046 | 1 Dlink | 2 Dcs-932l, Dcs-932l Firmware | 2025-04-11 | 3.3 LOW | N/A |
| The D-Link DCS-932L camera with firmware 1.02 allows remote attackers to discover the password via a UDP broadcast packet, as demonstrated by running the D-Link Setup Wizard and reading the _paramR["P"] value. | |||||
| CVE-2021-41504 | 1 Dlink | 4 Dcs-5000l, Dcs-5000l Firmware, Dcs-932l and 1 more | 2024-11-21 | 5.2 MEDIUM | 8.0 HIGH |
| ** UNSUPPORTED WHEN ASSIGNED ** An Elevated Privileges issue exists in D-Link DCS-5000L v1.05 and DCS-932L v2.17 and older. The use of the digest-authentication for the devices command interface may allow further attack vectors that may compromise the cameras configuration and allow malicious users on the LAN to access the device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. | |||||
| CVE-2021-41503 | 2 D-link, Dlink | 4 Dcs-5000l Firmware, Dcs-5000l, Dcs-932l and 1 more | 2024-11-21 | 5.2 MEDIUM | 8.0 HIGH |
| ** UNSUPPORTED WHEN ASSIGNED ** DCS-5000L v1.05 and DCS-932L v2.17 and older are affecged by Incorrect Acess Control. The use of the basic authentication for the devices command interface allows attack vectors that may compromise the cameras configuration and allow malicious users on the LAN to access the device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. | |||||
| CVE-2019-10999 | 1 Dlink | 20 Dcs-5009l, Dcs-5009l Firmware, Dcs-5010l and 17 more | 2024-11-21 | 6.5 MEDIUM | 8.8 HIGH |
| The D-Link DCS series of Wi-Fi cameras contains a stack-based buffer overflow in alphapd, the camera's web server. The overflow allows a remotely authenticated attacker to execute arbitrary code by providing a long string in the WEPEncryption parameter when requesting wireless.htm. Vulnerable devices include DCS-5009L (1.08.11 and below), DCS-5010L (1.14.09 and below), DCS-5020L (1.15.12 and below), DCS-5025L (1.03.07 and below), DCS-5030L (1.04.10 and below), DCS-930L (2.16.01 and below), DCS-931L (1.14.11 and below), DCS-932L (2.17.01 and below), DCS-933L (1.14.11 and below), and DCS-934L (1.05.04 and below). | |||||
| CVE-2018-18441 | 2 D-link, Dlink | 36 Dcs-2102 Firmware, Dcs-2121 Firmware, Dcs-2630l Firmware and 33 more | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| D-Link DCS series Wi-Fi cameras expose sensitive information regarding the device configuration. The affected devices include many of DCS series, such as: DCS-936L, DCS-942L, DCS-8000LH, DCS-942LB1, DCS-5222L, DCS-825L, DCS-2630L, DCS-820L, DCS-855L, DCS-2121, DCS-5222LB1, DCS-5020L, and many more. There are many affected firmware versions starting from 1.00 and above. The configuration file can be accessed remotely through: <Camera-IP>/common/info.cgi, with no authentication. The configuration file include the following fields: model, product, brand, version, build, hw_version, nipca version, device name, location, MAC address, IP address, gateway IP address, wireless status, input/output settings, speaker, and sensor settings. | |||||