Vulnerabilities (CVE)

Filtered by vendor Cisco Subscribe
Filtered by product Nexus 9396tx
Total 98 CVE
CVE Vendors Products Updated CVSS v2 CVSS v3
CVE-2019-12662 1 Cisco 135 Ios Xe, Mds 9000, Nexus 3016 and 132 more 2024-02-04 7.2 HIGH 6.7 MEDIUM
A vulnerability in Cisco NX-OS Software and Cisco IOS XE Software could allow an authenticated, local attacker with valid administrator or privilege level 15 credentials to load a virtual service image and bypass signature verification on an affected device. The vulnerability is due to improper signature verification during the installation of an Open Virtual Appliance (OVA) image. An authenticated, local attacker could exploit this vulnerability and load a malicious, unsigned OVA image on an affected device. A successful exploit could allow an attacker to perform code execution on a crafted software OVA image.
CVE-2020-3174 1 Cisco 80 Mds 9132t, Mds 9148s, Mds 9148t and 77 more 2024-02-04 3.3 LOW 4.7 MEDIUM
A vulnerability in the anycast gateway feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a device to learn invalid Address Resolution Protocol (ARP) entries. The ARP entries are for nonlocal IP addresses for the subnet. The vulnerability is due to improper validation of a received gratuitous ARP (GARP) request. An attacker could exploit this vulnerability by sending a malicious GARP packet on the local subnet to cause the ARP table on the device to become corrupted. A successful exploit could allow the attacker to populate the ARP table with incorrect entries, which could lead to traffic disruptions.
CVE-2019-1778 1 Cisco 67 N9k-c9504-fm-r, N9k-c9508-fm-r, N9k-x96136yc-r and 64 more 2024-02-04 7.2 HIGH 6.7 MEDIUM
A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.
CVE-2019-1977 1 Cisco 23 Nexus 9000, Nexus 93108tc-ex, Nexus 93108tc-fx and 20 more 2024-02-04 4.3 MEDIUM 7.5 HIGH
A vulnerability within the Endpoint Learning feature of Cisco Nexus 9000 Series Switches running in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an endpoint device in certain circumstances. The vulnerability is due to improper endpoint learning when packets are received on a specific port from outside the ACI fabric and destined to an endpoint located on a border leaf when Disable Remote Endpoint Learning has been enabled. This can result in a Remote (XR) entry being created for the impacted endpoint that will become stale if the endpoint migrates to a different port or leaf switch. This results in traffic not reaching the impacted endpoint until the Remote entry can be relearned by another mechanism.
CVE-2019-1804 1 Cisco 26 Nexus 93108tc-ex, Nexus 93108tc-ex Firmware, Nexus 93120tx and 23 more 2024-02-04 10.0 HIGH 9.8 CRITICAL
A vulnerability in the SSH key management for the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an unauthenticated, remote attacker to connect to the affected system with the privileges of the root user. The vulnerability is due to the presence of a default SSH key pair that is present in all devices. An attacker could exploit this vulnerability by opening an SSH connection via IPv6 to a targeted device using the extracted key materials. An exploit could allow the attacker to access the system with the privileges of the root user. This vulnerability is only exploitable over IPv6; IPv4 is not vulnerable.
CVE-2019-1967 1 Cisco 92 Mds 9000, Mds 9100, Mds 9140 and 89 more 2024-02-04 7.8 HIGH 7.5 HIGH
A vulnerability in the Network Time Protocol (NTP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to excessive use of system resources when the affected device is logging a drop action for received MODE_PRIVATE (Mode 7) NTP packets. An attacker could exploit this vulnerability by flooding the device with a steady stream of Mode 7 NTP packets. A successful exploit could allow the attacker to cause high CPU and memory usage on the affected device, which could cause internal system processes to restart or cause the affected device to unexpectedly reload. Note: The NTP feature is enabled by default.
CVE-2019-1781 1 Cisco 97 Firepower 4110, Firepower 4120, Firepower 4140 and 94 more 2024-02-04 7.2 HIGH 6.7 MEDIUM
A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need administrator credentials to exploit this vulnerability.
CVE-2019-1969 1 Cisco 65 Nexus 3016, Nexus 3048, Nexus 3064 and 62 more 2024-02-04 5.0 MEDIUM 5.3 MEDIUM
A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) Access Control List (ACL) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic. The vulnerability is due to an incorrect length check when the configured ACL name is the maximum length, which is 32 ASCII characters. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP polling that should have been denied. The attacker has no control of the configuration of the SNMP ACL name.
CVE-2019-1585 1 Cisco 20 Application Policy Infrastructure Controller Software, Nexus 92160yc-x, Nexus 92304qc and 17 more 2024-02-04 7.2 HIGH 7.8 HIGH
A vulnerability in the controller authorization functionality of Cisco Nexus 9000 Series ACI Mode Switch Software could allow an authenticated, local attacker to escalate standard users with root privilege on an affected device. The vulnerability is due to a misconfiguration of certain sudoers files for the bashroot component on an affected device. An attacker could exploit this vulnerability by authenticating to the affected device with a crafted user ID, which may allow temporary administrative access to escalate privileges. A successful exploit could allow the attacker to escalate privileges on an affected device. This Vulnerability has been fixed in version 4.0(1h)
CVE-2019-1730 1 Cisco 48 Nexus 3000, Nexus 3100, Nexus 3100-z and 45 more 2024-02-04 7.2 HIGH 6.7 MEDIUM
A vulnerability in the Bash shell implementation for Cisco NX-OS Software could allow an authenticated, local attacker to bypass the limited command set of the restricted Guest Shell and execute commands at the privilege level of a network-admin user outside of the Guest Shell. The attacker must authenticate with valid administrator device credentials. The vulnerability is due to the incorrect implementation of a CLI command that allows a Bash command to be incorrectly invoked on the Guest Shell CLI. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the Guest Shell prompt. A successful exploit could allow the attacker to issue commands that should be restricted by a Guest Shell account.
CVE-2019-1901 1 Cisco 24 Nexus 93108tc-ex, Nexus 93108tc-fx, Nexus 93120tx and 21 more 2024-02-04 8.3 HIGH 8.8 HIGH
A vulnerability in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an adjacent, unauthenticated attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges. The vulnerability is due to improper input validation of certain type, length, value (TLV) fields of the LLDP frame header. An attacker could exploit this vulnerability by sending a crafted LLDP packet to the targeted device. A successful exploit may lead to a buffer overflow condition that could either cause a DoS condition or allow the attacker to execute arbitrary code with root privileges. Note: This vulnerability cannot be exploited by transit traffic through the device; the crafted packet must be targeted to a directly connected interface. This vulnerability affects Cisco Nexus 9000 Series Fabric Switches in ACI mode if they are running a Cisco Nexus 9000 Series ACI Mode Switch Software release prior to 13.2(7f) or any 14.x release.
CVE-2019-1590 1 Cisco 28 Nexus 9000, Nexus 92160yc-x, Nexus 92300yc and 25 more 2024-02-04 6.8 MEDIUM 8.1 HIGH
A vulnerability in the Transport Layer Security (TLS) certificate validation functionality of Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an unauthenticated, remote attacker to perform insecure TLS client authentication on an affected device. The vulnerability is due to insufficient TLS client certificate validations for certificates sent between the various components of an ACI fabric. An attacker who has possession of a certificate that is trusted by the Cisco Manufacturing CA and the corresponding private key could exploit this vulnerability by presenting a valid certificate while attempting to connect to the targeted device. An exploit could allow the attacker to gain full control of all other components within the ACI fabric of an affected device.
CVE-2019-1780 1 Cisco 92 Firepower 4110, Firepower 4115, Firepower 4120 and 89 more 2024-02-04 7.2 HIGH 6.7 MEDIUM
A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying operating system of an affected device with elevated privileges. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. NX-OS versions prior to 8.3(1) are affected. NX-OS versions prior to 8.3(1) are affected.
CVE-2019-1782 1 Cisco 97 Firepower 4110, Firepower 4120, Firepower 4140 and 94 more 2024-02-04 7.2 HIGH 6.7 MEDIUM
A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need administrator credentials to exploit this vulnerability.
CVE-2019-1779 1 Cisco 90 Firepower 4110, Firepower 4112, Firepower 4115 and 87 more 2024-02-04 7.2 HIGH 6.7 MEDIUM
A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device with elevated privileges. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid device credentials to exploit this vulnerability.
CVE-2019-1690 1 Cisco 100 Application Policy Infrastructure Controller, Firepower 2110, Firepower 2120 and 97 more 2024-02-04 3.3 LOW 6.5 MEDIUM
A vulnerability in the management interface of Cisco Application Policy Infrastructure Controller (APIC) software could allow an unauthenticated, adjacent attacker to gain unauthorized access on an affected device. The vulnerability is due to a lack of proper access control mechanisms for IPv6 link-local connectivity imposed on the management interface of an affected device. An attacker on the same physical network could exploit this vulnerability by attempting to connect to the IPv6 link-local address on the affected device. A successful exploit could allow the attacker to bypass default access control restrictions on an affected device. Cisco Application Policy Infrastructure Controller (APIC) devices running versions prior to 4.2(0.21c) are affected.
CVE-2019-1592 1 Cisco 28 Nexus 9000, Nexus 92160yc-x, Nexus 92300yc and 25 more 2024-02-04 7.2 HIGH 7.8 HIGH
A vulnerability in the background operations functionality of Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an authenticated, local attacker to gain elevated privileges as root on an affected device. The vulnerability is due to insufficient validation of user-supplied files on an affected device. An attacker could exploit this vulnerability by logging in to the CLI of the affected device and creating a crafted file in a specific directory on the filesystem. A successful exploit could allow the attacker to execute arbitrary operating system commands as root on an affected device.
CVE-2019-1731 1 Cisco 76 Nexus 3016, Nexus 3048, Nexus 3064 and 73 more 2024-02-04 2.1 LOW 4.4 MEDIUM
A vulnerability in the SSH CLI key management functionality of Cisco NX-OS Software could allow an authenticated, local attacker to expose a user's private SSH key to all authenticated users on the targeted device. The attacker must authenticate with valid administrator device credentials. The vulnerability is due to incomplete error handling if a specific error type occurs during the SSH key export. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the CLI. A successful exploit could allow the attacker to expose a user's private SSH key. In addition, a similar type of error in the SSH key import could cause the passphrase-protected private SSH key to be imported unintentionally.
CVE-2019-1587 1 Cisco 28 Nexus 9000, Nexus 92160yc-x, Nexus 92300yc and 25 more 2024-02-04 4.0 MEDIUM 4.3 MEDIUM
A vulnerability in Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an authenticated, remote attacker to access sensitive information. The vulnerability occurs because the affected software does not properly validate user-supplied input. An attacker could exploit this vulnerability by issuing certain commands with filtered query results on the device. This action may cause returned messages to display confidential system information. A successful exploit could allow the attacker to read sensitive information on the device.
CVE-2019-1768 1 Cisco 65 Nexus 3016, Nexus 3048, Nexus 3064 and 62 more 2024-02-04 7.2 HIGH 6.7 MEDIUM
A vulnerability in the implementation of a specific CLI command for Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to cause a buffer overflow condition or perform command injection. This could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument of the affected CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. An attacker would need valid administrator credentials to exploit these vulnerabilities.