Total
4365 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2020-21935 | 1 Motorola | 2 Cx2, Cx2 Firmware | 2024-11-21 | 7.5 HIGH | 9.8 CRITICAL |
| A command injection vulnerability in HNAP1/GetNetworkTomographySettings of Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n allows attackers to execute arbitrary code. | |||||
| CVE-2020-21883 | 1 Indionetworks | 10 Unibox U1000, Unibox U1000 Firmware, Unibox U2500 and 7 more | 2024-11-21 | 9.0 HIGH | 8.8 HIGH |
| Unibox U-50 2.4 and UniBox Enterprise Series 2.4 and UniBox Campus Series 2.4 contain a OS command injection vulnerability in /tools/ping, which can leads to complete device takeover. | |||||
| CVE-2020-1980 | 1 Paloaltonetworks | 1 Pan-os | 2024-11-21 | 7.2 HIGH | 7.8 HIGH |
| A shell command injection vulnerability in the PAN-OS CLI allows a local authenticated user to escape the restricted shell and escalate privileges. This issue affects only PAN-OS 8.1 versions earlier than PAN-OS 8.1.13. This issue does not affect PAN-OS 7.1, PAN-OS 9.0, or later PAN-OS versions. This issue is fixed in PAN-OS 8.1.13, and all later versions. | |||||
| CVE-2020-1946 | 3 Apache, Debian, Fedoraproject | 3 Spamassassin, Debian Linux, Fedora | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| In Apache SpamAssassin before 3.4.5, malicious rule configuration (.cf) files can be configured to run system commands without any output or errors. With this, exploits can be injected in a number of scenarios. In addition to upgrading to SA version 3.4.5, users should only use update channels or 3rd party .cf files from trusted places. | |||||
| CVE-2020-1931 | 1 Apache | 1 Spamassassin | 2024-11-21 | 9.3 HIGH | 8.1 HIGH |
| A command execution issue was found in Apache SpamAssassin prior to 3.4.3. Carefully crafted nefarious Configuration (.cf) files can be configured to run system commands similar to CVE-2018-11805. This issue is less stealthy and attempts to exploit the issue will throw warnings. Thanks to Damian Lukowski at credativ for reporting the issue ethically. With this bug unpatched, exploits can be injected in a number of scenarios though doing so remotely is difficult. In addition to upgrading to SA 3.4.4, we again recommend that users should only use update channels or 3rd party .cf files from trusted places. | |||||
| CVE-2020-1930 | 1 Apache | 1 Spamassassin | 2024-11-21 | 9.3 HIGH | 8.1 HIGH |
| A command execution issue was found in Apache SpamAssassin prior to 3.4.3. Carefully crafted nefarious rule configuration (.cf) files can be configured to run system commands similar to CVE-2018-11805. With this bug unpatched, exploits can be injected in a number of scenarios including the same privileges as spamd is run which may be elevated though doing so remotely is difficult. In addition to upgrading to SA 3.4.4, we again recommend that users should only use update channels or 3rd party .cf files from trusted places. If you cannot upgrade, do not use 3rd party rulesets, do not use sa-compile and do not run spamd as an account with elevated privileges. | |||||
| CVE-2020-1734 | 1 Redhat | 2 Ansible Engine, Ansible Tower | 2024-11-21 | 3.7 LOW | 7.4 HIGH |
| A flaw was found in the pipe lookup plugin of ansible. Arbitrary commands can be run, when the pipe lookup plugin uses subprocess.Popen() with shell=True, by overwriting ansible facts and the variable is not escaped by quote plugin. An attacker could take advantage and run arbitrary commands by overwriting the ansible facts. | |||||
| CVE-2020-1609 | 1 Juniper | 1 Junos | 2024-11-21 | 8.3 HIGH | 8.8 HIGH |
| When a device using Juniper Network's Dynamic Host Configuration Protocol Daemon (JDHCPD) process on Junos OS or Junos OS Evolved which is configured in relay mode it vulnerable to an attacker sending crafted IPv6 packets who may then arbitrarily execute commands as root on the target device. This issue affects IPv6 JDHCPD services. This issue affects: Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S6; 15.1X49 versions prior to 15.1X49-D200; 15.1X53 versions prior to 15.1X53-D592; 16.1 versions prior to 16.1R7-S6; 16.2 versions prior to 16.2R2-S11; 17.1 versions prior to 17.1R2-S11, 17.1R3-S1; 17.2 versions prior to 17.2R2-S8, 17.2R3-S3; 17.3 versions prior to 17.3R3-S6; 17.4 versions prior to 17.4R2-S7, 17.4R3; 18.1 versions prior to 18.1R3-S8; 18.2 versions prior to 18.2R3-S2; 18.2X75 versions prior to 18.2X75-D60; 18.3 versions prior to 18.3R1-S6, 18.3R2-S2, 18.3R3; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3; 19.1 versions prior to 19.1R1-S3, 19.1R2; 19.2 versions prior to 19.2R1-S3, 19.2R2*. and All versions prior to 19.3R1 on Junos OS Evolved. This issue do not affect versions of Junos OS prior to 15.1, or JDHCPD operating as a local server in non-relay mode. | |||||
| CVE-2020-1605 | 1 Juniper | 1 Junos | 2024-11-21 | 8.3 HIGH | 8.8 HIGH |
| When a device using Juniper Network's Dynamic Host Configuration Protocol Daemon (JDHCPD) process on Junos OS or Junos OS Evolved which is configured in relay mode it vulnerable to an attacker sending crafted IPv4 packets who may then arbitrarily execute commands as root on the target device. This issue affects IPv4 JDHCPD services. This issue affects: Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S6; 15.1X49 versions prior to 15.1X49-D200; 15.1X53 versions prior to 15.1X53-D592; 16.1 versions prior to 16.1R7-S6; 16.2 versions prior to 16.2R2-S11; 17.1 versions prior to 17.1R2-S11, 17.1R3-S1; 17.2 versions prior to 17.2R2-S8, 17.2R3-S3; 17.3 versions prior to 17.3R3-S6; 17.4 versions prior to 17.4R2-S7, 17.4R3; 18.1 versions prior to 18.1R3-S8; 18.2 versions prior to 18.2R3-S2; 18.2X75 versions prior to 18.2X75-D60; 18.3 versions prior to 18.3R1-S6, 18.3R2-S2, 18.3R3; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3; 19.1 versions prior to 19.1R1-S3, 19.1R2; 19.2 versions prior to 19.2R1-S3, 19.2R2*. and All versions prior to 19.3R1 on Junos OS Evolved. This issue do not affect versions of Junos OS prior to 15.1, or JDHCPD operating as a local server in non-relay mode. | |||||
| CVE-2020-1602 | 1 Juniper | 1 Junos | 2024-11-21 | 8.3 HIGH | 7.1 HIGH |
| When a device using Juniper Network's Dynamic Host Configuration Protocol Daemon (JDHCPD) process on Junos OS or Junos OS Evolved which is configured in relay mode it vulnerable to an attacker sending crafted IPv4 packets who may remotely take over the code execution of the JDHDCP process. This issue affect IPv4 JDHCPD services. This issue affects: Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S6; 15.1X49 versions prior to 15.1X49-D200; 15.1X53 versions prior to 15.1X53-D592; 16.1 versions prior to 16.1R7-S6; 16.2 versions prior to 16.2R2-S11; 17.1 versions prior to 17.1R2-S11, 17.1R3-S1; 17.2 versions prior to 17.2R2-S8, 17.2R3-S3; 17.3 versions prior to 17.3R3-S6; 17.4 versions prior to 17.4R2-S7, 17.4R3; 18.1 versions prior to 18.1R3-S8; 18.2 versions prior to 18.2R3-S2; 18.2X75 versions prior to 18.2X75-D60; 18.3 versions prior to 18.3R1-S6, 18.3R2-S2, 18.3R3; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3; 19.1 versions prior to 19.1R1-S3, 19.1R2; 19.2 versions prior to 19.2R1-S3, 19.2R2*. and All versions prior to 19.3R1 on Junos OS Evolved. This issue do not affect versions of Junos OS prior to 15.1, or JDHCPD operating as a local server in non-relay mode. | |||||
| CVE-2020-19907 | 1 Mitre | 1 Caldera | 2024-11-21 | 6.5 MEDIUM | 8.8 HIGH |
| A command injection vulnerability in the sandcat plugin of Caldera 2.3.1 and earlier allows authenticated attackers to execute any command or service. | |||||
| CVE-2020-19527 | 1 Idreamsoft | 1 Icms | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| iCMS 7.0.14 attackers to execute arbitrary OS commands via shell metacharacters in the DB_NAME parameter to install/install.php. | |||||
| CVE-2020-19316 | 2 Laravel, Microsoft | 2 Framework, Windows | 2024-11-21 | 6.8 MEDIUM | 8.8 HIGH |
| OS Command injection vulnerability in function link in Filesystem.php in Laravel Framework before 5.8.17. | |||||
| CVE-2020-19142 | 1 Idreamsoft | 1 Icms | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| iCMS 7 attackers to execute arbitrary OS commands via shell metacharacters in the DB_PREFIX parameter to install/install.php. | |||||
| CVE-2020-17505 | 1 Articatech | 1 Web Proxy | 2024-11-21 | 9.0 HIGH | 8.8 HIGH |
| Artica Web Proxy 4.30.000000 allows an authenticated remote attacker to inject commands via the service-cmds parameter in cyrus.php. These commands are executed with root privileges via service_cmds_peform. | |||||
| CVE-2020-17456 | 1 Seowonintech | 10 Slc-130, Slc-130 Firmware, Slr-120d42g and 7 more | 2024-11-21 | 7.5 HIGH | 9.8 CRITICAL |
| SEOWON INTECH SLC-130 And SLR-120S devices allow Remote Code Execution via the ipAddr parameter to the system_log.cgi page. | |||||
| CVE-2020-17406 | 1 Microhardcorp | 2 Bullet-lte, Bullet-lte Firmware | 2024-11-21 | 9.0 HIGH | 8.8 HIGH |
| This vulnerability allows remote attackers to execute arbitrary code on affected installations of Microhard Bullet-LTE prior to v1.2.0-r1112. Authentication is required to exploit this vulnerability. The specific flaw exists within the handling of the ping parameter provided to tools.sh. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-10595. | |||||
| CVE-2020-17368 | 2 Debian, Firejail Project | 2 Debian Linux, Firejail | 2024-11-21 | 7.5 HIGH | 9.8 CRITICAL |
| Firejail through 0.9.62 mishandles shell metacharacters during use of the --output or --output-stderr option, which may lead to command injection. | |||||
| CVE-2020-17363 | 1 Usvn | 1 Usvn | 2024-11-21 | 9.0 HIGH | 9.9 CRITICAL |
| USVN (aka User-friendly SVN) before 1.0.9 allows remote code execution via shell metacharacters in the number_start or number_end parameter to LastHundredRequest (aka lasthundredrequestAction) in the Timeline module. NOTE: this may overlap CVE-2020-25069. | |||||
| CVE-2020-17352 | 1 Sophos | 1 Xg Firewall Firmware | 2024-11-21 | 6.5 MEDIUM | 8.8 HIGH |
| Two OS command injection vulnerabilities in the User Portal of Sophos XG Firewall through 2020-08-05 potentially allow an authenticated attacker to remotely execute arbitrary code. | |||||