Total
3565 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-12477 | 1 Kaseya | 1 Unitrends Backup | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| It was discovered that the bpserverd proprietary protocol in Unitrends Backup (UB) before 10.0.0, as invoked through xinetd, has an issue in which its authentication can be bypassed. A remote attacker could use this issue to execute arbitrary commands with root privilege on the target system. | |||||
| CVE-2017-12337 | 1 Cisco | 11 Emergency Responder, Finesse, Hosted Collaboration Solution and 8 more | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerability in the upgrade mechanism of Cisco collaboration products based on the Cisco Voice Operating System software platform could allow an unauthenticated, remote attacker to gain unauthorized, elevated access to an affected device. The vulnerability occurs when a refresh upgrade (RU) or Prime Collaboration Deployment (PCD) migration is performed on an affected device. When a refresh upgrade or PCD migration is completed successfully, an engineering flag remains enabled and could allow root access to the device with a known password. If the vulnerable device is subsequently upgraded using the standard upgrade method to an Engineering Special Release, service update, or a new major release of the affected product, this vulnerability is remediated by that action. Note: Engineering Special Releases that are installed as COP files, as opposed to the standard upgrade method, do not remediate this vulnerability. An attacker who can access an affected device over SFTP while it is in a vulnerable state could gain root access to the device. This access could allow the attacker to compromise the affected system completely. Cisco Bug IDs: CSCvg22923, CSCvg55112, CSCvg55128, CSCvg55145, CSCvg58619, CSCvg64453, CSCvg64456, CSCvg64464, CSCvg64475, CSCvg68797. | |||||
| CVE-2017-12281 | 1 Cisco | 12 Aironet 1800 Firmware, Aironet 1830e, Aironet 1830i and 9 more | 2024-11-21 | 5.4 MEDIUM | 7.5 HIGH |
| A vulnerability in the implementation of Protected Extensible Authentication Protocol (PEAP) functionality for standalone configurations of Cisco Aironet 1800, 2800, and 3800 Series Access Points could allow an unauthenticated, adjacent attacker to bypass authentication and connect to an affected device. The vulnerability exists because the affected device uses an incorrect default configuration setting of fail open when running in standalone mode. An attacker could exploit this vulnerability by attempting to connect to an affected device. A successful exploit could allow the attacker to bypass authentication and connect to the affected device. This vulnerability affects Cisco Aironet 1800, 2800, and 3800 Series Access Points that are running a vulnerable software release and use WLAN configuration settings that include FlexConnect local switching and central authentication with MAC filtering. Cisco Bug IDs: CSCvd46314. | |||||
| CVE-2017-12251 | 1 Cisco | 1 Cloud Services Platform 2100 | 2024-11-21 | 6.5 MEDIUM | 9.9 CRITICAL |
| A vulnerability in the web console of the Cisco Cloud Services Platform (CSP) 2100 could allow an authenticated, remote attacker to interact maliciously with the services or virtual machines (VMs) operating remotely on an affected CSP device. The vulnerability is due to weaknesses in the generation of certain authentication mechanisms in the URL of the web console. An attacker could exploit this vulnerability by browsing to one of the hosted VMs' URLs in Cisco CSP and viewing specific patterns that control the web application's mechanisms for authentication control. An exploit could allow the attacker to access a specific VM on the CSP, which causes a complete loss of the system's confidentiality, integrity, and availability. This vulnerability affects Cisco Cloud Services Platform (CSP) 2100 running software release 2.1.0, 2.1.1, 2.1.2, 2.2.0, 2.2.1, or 2.2.2. Cisco Bug IDs: CSCve64690. | |||||
| CVE-2017-12236 | 1 Cisco | 1 Ios Xe | 2024-11-21 | 7.5 HIGH | 9.8 CRITICAL |
| A vulnerability in the implementation of the Locator/ID Separation Protocol (LISP) in Cisco IOS XE 3.2 through 16.5 could allow an unauthenticated, remote attacker using an x tunnel router to bypass authentication checks performed when registering an Endpoint Identifier (EID) to a Routing Locator (RLOC) in the map server/map resolver (MS/MR). The vulnerability is due to a logic error introduced via a code regression for the affected software. An attacker could exploit this vulnerability by sending specific valid map-registration requests, which will be accepted by the MS/MR even if the authentication keys do not match, to the affected software. A successful exploit could allow the attacker to inject invalid mappings of EIDs to RLOCs in the MS/MR of the affected software. This vulnerability affects Cisco devices that are configured with LISP acting as an IPv4 or IPv6 map server. This vulnerability affects Cisco IOS XE Software release trains 3.9E and Everest 16.4. Cisco Bug IDs: CSCvc18008. | |||||
| CVE-2017-12229 | 1 Cisco | 1 Ios Xe | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036. | |||||
| CVE-2017-12213 | 1 Cisco | 2 Catalyst 4000, Ios Xe | 2024-11-21 | 3.3 LOW | 4.3 MEDIUM |
| A vulnerability in the dynamic access control list (ACL) feature of Cisco IOS XE Software running on Cisco Catalyst 4000 Series Switches could allow an unauthenticated, adjacent attacker to cause dynamic ACL assignment to fail and the port to fail open. This could allow the attacker to pass traffic to the default VLAN of the affected port. The vulnerability is due to an uncaught error condition that may occur during the reassignment of the auth-default-ACL dynamic ACL to a switch port after 802.1x authentication fails. A successful exploit of this issue could allow a physically adjacent attacker to bypass 802.1x authentication and cause the affected port to fail open, allowing the attacker to pass traffic to the default VLAN of the affected switch port. Cisco Bug IDs: CSCvc72751. | |||||
| CVE-2017-12160 | 1 Redhat | 1 Keycloak | 2024-11-21 | 6.5 MEDIUM | 7.2 HIGH |
| It was found that Keycloak oauth would permit an authenticated resource to obtain an access/refresh token pair from the authentication server, permitting indefinite usage in the case of permission revocation. An attacker on an already compromised resource could use this flaw to grant himself continued permissions and possibly conduct further attacks. | |||||
| CVE-2017-11645 | 1 Netcomm | 2 4gt101w Bootloader, 4gt101w Software | 2024-11-21 | 7.5 HIGH | 9.8 CRITICAL |
| NetComm Wireless 4GT101W routers with Hardware: 0.01 / Software: V1.1.8.8 / Bootloader: 1.1.3 do not require authentication for logfile.html, status.html, or system_config.html. | |||||
| CVE-2017-11430 | 1 Omniauth | 1 Omniauth Saml | 2024-11-21 | 7.5 HIGH | 7.7 HIGH |
| OmniAuth OmnitAuth-SAML 1.9.0 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers. | |||||
| CVE-2017-11429 | 1 Clever | 1 Saml2-js | 2024-11-21 | 7.5 HIGH | 7.7 HIGH |
| Clever saml2-js 2.0 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers. | |||||
| CVE-2017-11428 | 1 Onelogin | 1 Ruby-saml | 2024-11-21 | 7.5 HIGH | 7.7 HIGH |
| OneLogin Ruby-SAML 1.6.0 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers. | |||||
| CVE-2017-11427 | 1 Onelogin | 1 Pythonsaml | 2024-11-21 | 7.5 HIGH | 7.7 HIGH |
| OneLogin PythonSAML 2.3.0 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers. | |||||
| CVE-2017-11151 | 1 Synology | 1 Photo Station | 2024-11-21 | 7.5 HIGH | 9.8 CRITICAL |
| A vulnerability in synotheme_upload.php in Synology Photo Station before 6.7.3-3432 and 6.3-2967 allows remote attackers to upload arbitrary files without authentication via the logo_upload action. | |||||
| CVE-2017-10903 | 1 Princeton | 2 Ptw-wms1, Ptw-wms1 Firmware | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| Improper authentication issue in PTW-WMS1 firmware version 2.000.012 allows remote attackers to log in to the device with root privileges and conduct arbitrary operations via unspecified vectors. | |||||
| CVE-2017-10873 | 1 Osstech | 1 Openam | 2024-11-21 | 6.8 MEDIUM | 8.1 HIGH |
| OpenAM (Open Source Edition) allows an attacker to bypass authentication and access unauthorized contents via unspecified vectors. Note that this vulnerability affects OpenAM (Open Source Edition) implementations configured as SAML 2.0IdP, and switches authentication methods based on AuthnContext requests sent from the service provider. | |||||
| CVE-2017-10817 | 1 Intercom | 1 Malion | 2024-11-21 | 7.5 HIGH | 9.8 CRITICAL |
| MaLion for Windows and Mac 5.0.0 to 5.2.1 allows remote attackers to bypass authentication to alter settings in Relay Service Server. | |||||
| CVE-2017-10815 | 1 Intercom | 1 Malion | 2024-11-21 | 6.8 MEDIUM | 8.1 HIGH |
| MaLion for Windows 5.2.1 and earlier (only when "Remote Control" is installed) and MaLion for Mac 4.0.1 to 5.2.1 (only when "Remote Control" is installed) allow remote attackers to bypass authentication to execute arbitrary commands or operations on Terminal Agent. | |||||
| CVE-2017-10807 | 1 Jabberd2 | 1 Jabberd2 | 2024-11-21 | 7.5 HIGH | 9.8 CRITICAL |
| JabberD 2.x (aka jabberd2) before 2.6.1 allows anyone to authenticate using SASL ANONYMOUS, even when the sasl.anonymous c2s.xml option is not enabled. | |||||
| CVE-2017-10796 | 1 Tp-link | 2 Nc250, Nc250 Firmware | 2024-11-21 | 3.3 LOW | 6.5 MEDIUM |
| On TP-Link NC250 devices with firmware through 1.2.1 build 170515, anyone can view video and audio without authentication via an rtsp://admin@yourip:554/h264_hd.sdp URL. | |||||