Total
3672 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-3867 | 1 Cisco | 1 Adaptive Security Appliance Software | 2025-04-20 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the Border Gateway Protocol (BGP) Bidirectional Forwarding Detection (BFD) implementation of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to bypass the access control list (ACL) for specific TCP and UDP traffic. More Information: CSCvc68229. Known Affected Releases: 9.6(2). Known Fixed Releases: 99.1(20.1) 99.1(10.2) 98.1(12.7) 98.1(1.49) 97.1(6.58) 97.1(0.134) 96.2(0.109) 9.7(1.1) 9.6(2.99) 9.6(2.8). | |||||
| CVE-2017-9316 | 1 Dahuasecurity | 18 Ipc-hdbw4x00, Ipc-hdbw4x00 Firmware, Ipc-hdbw5x00 and 15 more | 2025-04-20 | 5.8 MEDIUM | 6.5 MEDIUM |
| Firmware upgrade authentication bypass vulnerability was found in Dahua IPC-HDW4300S and some IP products. The vulnerability was caused by internal Debug function. This particular function was used for problem analysis and performance tuning during product development phase. It allowed the device to receive only specific data (one direction, no transmit) and therefore it was not involved in any instance of collecting user privacy data or allowing remote code execution. | |||||
| CVE-2017-10601 | 1 Juniper | 1 Junos | 2025-04-20 | 10.0 HIGH | 9.8 CRITICAL |
| A specific device configuration can result in a commit failure condition. When this occurs, a user is logged in without being prompted for a password while trying to login through console, ssh, ftp, telnet or su, etc., This issue relies upon a device configuration precondition to occur. Typically, device configurations are the result of a trusted administrative change to the system's running configuration. The following error messages may be seen when this failure occurs: mgd: error: commit failed: (statements constraint check failed) Warning: Commit failed, activating partial configuration. Warning: Edit the router configuration to fix these errors. If the administrative changes are not made that result in such a failure, then this issue is not seen. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 12.3 prior to 12.3R10, 12.3R11; 12.3X48 prior to 12.3X48-D20; 13.2 prior to 13.2R8; 13.3 prior to 13.3R7; 14.1 prior to 14.1R4-S12, 14.1R5, 14.1R6; 14.1X53 prior to 14.1X53-D30; 14.2 prior to 14.2R4; 15.1 prior to 15.1F2, 15.1F3, 15.1R2. | |||||
| CVE-2017-12698 | 1 Advantech | 1 Webaccess | 2025-04-20 | 7.5 HIGH | 9.8 CRITICAL |
| An Improper Authentication issue was discovered in Advantech WebAccess versions prior to V8.2_20170817. Specially crafted requests allow a possible authentication bypass that could allow remote code execution. | |||||
| CVE-2017-8078 | 1 Tp-link | 2 Tl-sg108e, Tl-sg108e Firmware | 2025-04-20 | 5.0 MEDIUM | 5.3 MEDIUM |
| On the TP-Link TL-SG108E 1.0, the upgrade process can be requested remotely without authentication (httpupg.cgi with a parameter called cmd). This affects the 1.1.2 Build 20141017 Rel.50749 firmware. | |||||
| CVE-2015-8308 | 1 Lxdm Project | 1 Lxdm | 2025-04-20 | 4.6 MEDIUM | 7.8 HIGH |
| LXDM before 0.5.2 did not start X server with -auth, which allows local users to bypass authentication with X connections. | |||||
| CVE-2017-14337 | 1 Misp-project | 1 Misp | 2025-04-20 | 6.8 MEDIUM | 8.1 HIGH |
| When MISP before 2.4.80 is configured with X.509 certificate authentication (CertAuth) in conjunction with a non-MISP external user management ReST API, if an external user provides X.509 certificate authentication and this API returns an empty value, the unauthenticated user can be granted access as an arbitrary user. | |||||
| CVE-2017-7546 | 2 Debian, Postgresql | 2 Debian Linux, Postgresql | 2025-04-20 | 7.5 HIGH | 9.8 CRITICAL |
| PostgreSQL versions before 9.2.22, 9.3.18, 9.4.13, 9.5.8 and 9.6.4 are vulnerable to incorrect authentication flaw allowing remote attackers to gain access to database accounts with an empty password. | |||||
| CVE-2017-15295 | 1 Sap | 1 Point Of Sale Xpress Server | 2025-04-20 | 10.0 HIGH | 9.8 CRITICAL |
| Xpress Server in SAP POS does not require authentication for read/write/delete file access. This is SAP Security Note 2520064. | |||||
| CVE-2017-10815 | 1 Intercom | 1 Malion | 2025-04-20 | 6.8 MEDIUM | 8.1 HIGH |
| MaLion for Windows 5.2.1 and earlier (only when "Remote Control" is installed) and MaLion for Mac 4.0.1 to 5.2.1 (only when "Remote Control" is installed) allow remote attackers to bypass authentication to execute arbitrary commands or operations on Terminal Agent. | |||||
| CVE-2017-14972 | 1 Infocus | 1 Mondopad | 2025-04-20 | 5.0 MEDIUM | 7.5 HIGH |
| InFocus Mondopad 2.2.08 is vulnerable to authentication bypass when accessing uploaded files by entering Control-Alt-Delete, and then using Task Manager to reach a file. | |||||
| CVE-2017-8028 | 2 Debian, Pivotal Software | 2 Debian Linux, Spring-ldap | 2025-04-20 | 5.1 MEDIUM | 8.1 HIGH |
| In Pivotal Spring-LDAP versions 1.3.0 - 2.3.1, when connected to some LDAP servers, when no additional attributes are bound, and when using LDAP BindAuthenticator with org.springframework.ldap.core.support.DefaultTlsDirContextAuthenticationStrategy as the authentication strategy, and setting userSearch, authentication is allowed with an arbitrary password when the username is correct. This occurs because some LDAP vendors require an explicit operation for the LDAP bind to take effect. | |||||
| CVE-2017-14147 | 1 Fiberhome | 2 Adsl An1020-25, Adsl An1020-25 Firmware | 2025-04-20 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered on FiberHome User End Routers Bearing Model Number AN1020-25 which could allow an attacker to easily restore a router to its factory settings by simply browsing to the link http://[Default-Router-IP]/restoreinfo.cgi & execute it. Due to improper authentication on this page, the software accepts the request hence allowing attacker to reset the router to its default configurations which later could allow attacker to login to router by using default username/password. | |||||
| CVE-2016-10309 | 1 Ceragon | 2 Fibeair Ip-10, Fibeair Ip-10 Firmware | 2025-04-20 | 7.5 HIGH | 9.8 CRITICAL |
| In the GUI of Ceragon FibeAir IP-10 (before 7.2.0) devices, a remote attacker can bypass authentication by adding an ALBATROSS cookie with the value 0-4-11 to their browser. | |||||
| CVE-2017-3167 | 6 Apache, Apple, Debian and 3 more | 15 Http Server, Mac Os X, Debian Linux and 12 more | 2025-04-20 | 7.5 HIGH | 9.8 CRITICAL |
| In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26, use of the ap_get_basic_auth_pw() by third-party modules outside of the authentication phase may lead to authentication requirements being bypassed. | |||||
| CVE-2017-7921 | 1 Hikvision | 116 Ds-2cd2032-i, Ds-2cd2032-i Firmware, Ds-2cd2112-i and 113 more | 2025-04-20 | 7.5 HIGH | 10.0 CRITICAL |
| An Improper Authentication issue was discovered in Hikvision DS-2CD2xx2F-I Series V5.2.0 build 140721 to V5.4.0 build 160530, DS-2CD2xx0F-I Series V5.2.0 build 140721 to V5.4.0 Build 160401, DS-2CD2xx2FWD Series V5.3.1 build 150410 to V5.4.4 Build 161125, DS-2CD4x2xFWD Series V5.2.0 build 140721 to V5.4.0 Build 160414, DS-2CD4xx5 Series V5.2.0 build 140721 to V5.4.0 Build 160421, DS-2DFx Series V5.2.0 build 140805 to V5.4.5 Build 160928, and DS-2CD63xx Series V5.0.9 build 140305 to V5.3.5 Build 160106 devices. The improper authentication vulnerability occurs when an application does not adequately or correctly authenticate users. This may allow a malicious user to escalate his or her privileges on the system and gain access to sensitive information. | |||||
| CVE-2017-13984 | 1 Hp | 1 Bsm Platform Application Performance Management System Health | 2025-04-20 | 5.5 MEDIUM | 6.5 MEDIUM |
| An authentication vulnerability in HPE BSM Platform Application Performance Management System Health product versions 9.26, 9.30 and 9.40, allows remote users to delete arbitrary files via servlet directory traversal. | |||||
| CVE-2017-3745 | 1 Lenovo | 1 Xclarity Administrator | 2025-04-20 | 2.1 LOW | 7.8 HIGH |
| In Lenovo XClarity Administrator (LXCA) before 1.3.0, if service data is downloaded from LXCA, a non-administrative user may have access to password information for users that have previously authenticated to the LXCA's internal LDAP server, including administrative accounts and service accounts with administrative privileges. This is an issue only for users who have used local authentication with LXCA and not remote authentication against external LDAP or ADFS servers. | |||||
| CVE-2016-9361 | 1 Moxa | 51 Nport 5100 Series Firmware, Nport 5100a Series Firmware, Nport 5110 and 48 more | 2025-04-20 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered in Moxa NPort 5110 versions prior to 2.6, NPort 5130/5150 Series versions prior to 3.6, NPort 5200 Series versions prior to 2.8, NPort 5400 Series versions prior to 3.11, NPort 5600 Series versions prior to 3.7, NPort 5100A Series & NPort P5150A versions prior to 1.3, NPort 5200A Series versions prior to 1.3, NPort 5150AI-M12 Series versions prior to 1.2, NPort 5250AI-M12 Series versions prior to 1.2, NPort 5450AI-M12 Series versions prior to 1.2, NPort 5600-8-DT Series versions prior to 2.4, NPort 5600-8-DTL Series versions prior to 2.4, NPort 6x50 Series versions prior to 1.13.11, NPort IA5450A versions prior to v1.4. Administration passwords can be retried without authenticating. | |||||
| CVE-2017-1222 | 1 Ibm | 1 Bigfix Platform | 2025-04-20 | 6.4 MEDIUM | 6.5 MEDIUM |
| IBM Tivoli Endpoint Manager (IBM BigFix Platform 9.2 and 9.5) does not perform an authentication check for a critical resource or functionality allowing anonymous users access to protected areas. IBM X-Force ID: 123862. | |||||