Total
93334 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-38110 | 2025-07-03 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net/mdiobus: Fix potential out-of-bounds clause 45 read/write access When using publicly available tools like 'mdio-tools' to read/write data from/to network interface and its PHY via C45 (clause 45) mdiobus, there is no verification of parameters passed to the ioctl and it accepts any mdio address. Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define, but it is possible to pass higher value than that via ioctl. While read/write operation should generally fail in this case, mdiobus provides stats array, where wrong address may allow out-of-bounds read/write. Fix that by adding address verification before C45 read/write operation. While this excludes this access from any statistics, it improves security of read/write operation. | |||||
| CVE-2025-38142 | 2025-07-03 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus-ec-sensors) check sensor index in read_string() Prevent a potential invalid memory access when the requested sensor is not found. find_ec_sensor_index() may return a negative value (e.g. -ENOENT), but its result was used without checking, which could lead to undefined behavior when passed to get_sensor_info(). Add a proper check to return -EINVAL if sensor_index is negative. Found by Linux Verification Center (linuxtesting.org) with SVACE. [groeck: Return error code returned from find_ec_sensor_index] | |||||
| CVE-2025-38116 | 2025-07-03 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix uaf in ath12k_core_init() When the execution of ath12k_core_hw_group_assign() or ath12k_core_hw_group_create() fails, the registered notifier chain is not unregistered properly. Its memory is freed after rmmod, which may trigger to a use-after-free (UAF) issue if there is a subsequent access to this notifier chain. Fixes the issue by calling ath12k_core_panic_notifier_unregister() in failure cases. Call trace: notifier_chain_register+0x4c/0x1f0 (P) atomic_notifier_chain_register+0x38/0x68 ath12k_core_init+0x50/0x4e8 [ath12k] ath12k_pci_probe+0x5f8/0xc28 [ath12k] pci_device_probe+0xbc/0x1a8 really_probe+0xc8/0x3a0 __driver_probe_device+0x84/0x1b0 driver_probe_device+0x44/0x130 __driver_attach+0xcc/0x208 bus_for_each_dev+0x84/0x100 driver_attach+0x2c/0x40 bus_add_driver+0x130/0x260 driver_register+0x70/0x138 __pci_register_driver+0x68/0x80 ath12k_pci_init+0x30/0x68 [ath12k] ath12k_init+0x28/0x78 [ath12k] Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 | |||||
| CVE-2025-34067 | 2025-07-03 | N/A | N/A | ||
| An unauthenticated remote command execution vulnerability exists in the applyCT component of the Hikvision Integrated Security Management Platform due to the use of a vulnerable version of the Fastjson library. The endpoint /bic/ssoService/v1/applyCT deserializes untrusted user input, allowing an attacker to trigger Fastjson's auto-type feature to load arbitrary Java classes. By referencing a malicious class via an LDAP URL, an attacker can achieve remote code execution on the underlying system. | |||||
| CVE-2025-38098 | 2025-07-03 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Don't treat wb connector as physical in create_validate_stream_for_sink Don't try to operate on a drm_wb_connector as an amdgpu_dm_connector. While dereferencing aconnector->base will "work" it's wrong and might lead to unknown bad things. Just... don't. | |||||
| CVE-2025-38105 | 2025-07-03 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Kill timer properly at removal The USB-audio MIDI code initializes the timer, but in a rare case, the driver might be freed without the disconnect call. This leaves the timer in an active state while the assigned object is released via snd_usbmidi_free(), which ends up with a kernel warning when the debug configuration is enabled, as spotted by fuzzer. For avoiding the problem, put timer_shutdown_sync() at snd_usbmidi_free(), so that the timer can be killed properly. While we're at it, replace the existing timer_delete_sync() at the disconnect callback with timer_shutdown_sync(), too. | |||||
| CVE-2025-34090 | 2025-07-03 | N/A | N/A | ||
| A security bypass vulnerability exists in Google Chrome AppBound cookie encryption mechanism due to insufficient validation of COM server paths during inter-process communication. A local low-privileged attacker can hijack the COM class identifier (CLSID) registration used by Chrome's elevation service and point it to a non-existent or malicious binary. When this hijack occurs, Chrome silently falls back to the legacy cookie encryption mechanism (protected only by user-DPAPI), thereby enabling cookie decryption by any user-context malware without SYSTEM-level access. This flaw bypasses the protections intended by the AppBound encryption design and allows cookie theft from Chromium-based browsers. Confirmed in Google Chrome with AppBound Encryption enabled. Other Chromium-based browsers may be affected if they implement similar COM-based encryption mechanisms. | |||||
| CVE-2025-38150 | 2025-07-03 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: af_packet: move notifier's packet_dev_mc out of rcu critical section Syzkaller reports the following issue: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:578 __mutex_lock+0x106/0xe80 kernel/locking/mutex.c:746 team_change_rx_flags+0x38/0x220 drivers/net/team/team_core.c:1781 dev_change_rx_flags net/core/dev.c:9145 [inline] __dev_set_promiscuity+0x3f8/0x590 net/core/dev.c:9189 netif_set_promiscuity+0x50/0xe0 net/core/dev.c:9201 dev_set_promiscuity+0x126/0x260 net/core/dev_api.c:286 packet_dev_mc net/packet/af_packet.c:3698 [inline] packet_dev_mclist_delete net/packet/af_packet.c:3722 [inline] packet_notifier+0x292/0xa60 net/packet/af_packet.c:4247 notifier_call_chain+0x1b3/0x3e0 kernel/notifier.c:85 call_netdevice_notifiers_extack net/core/dev.c:2214 [inline] call_netdevice_notifiers net/core/dev.c:2228 [inline] unregister_netdevice_many_notify+0x15d8/0x2330 net/core/dev.c:11972 rtnl_delete_link net/core/rtnetlink.c:3522 [inline] rtnl_dellink+0x488/0x710 net/core/rtnetlink.c:3564 rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6955 netlink_rcv_skb+0x219/0x490 net/netlink/af_netlink.c:2534 Calling `PACKET_ADD_MEMBERSHIP` on an ops-locked device can trigger the `NETDEV_UNREGISTER` notifier, which may require disabling promiscuous and/or allmulti mode. Both of these operations require acquiring the netdev instance lock. Move the call to `packet_dev_mc` outside of the RCU critical section. The `mclist` modifications (add, del, flush, unregister) are protected by the RTNL, not the RCU. The RCU only protects the `sklist` and its associated `sks`. The delayed operation on the `mclist` entry remains within the RTNL. | |||||
| CVE-2025-53359 | 2025-07-03 | N/A | N/A | ||
| ethereum is a common ethereum structs for Rust. Prior to ethereum crate v0.18.0, signature malleability (according to EIP-2) was only checked for "legacy" transactions, but not for EIP-2930, EIP-1559 and EIP-7702 transactions. This is a specification deviation. The signature malleability itself is not a security issue and not as high of a risk if the ethereum crate is used on a single-implementation blockchain. This issue has been patched in version v0.18.0. A workaround for this issue involves manually checking transaction malleability outside of the crate, however upgrading is recommended. | |||||
| CVE-2025-38160 | 2025-07-03 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: clk: bcm: rpi: Add NULL check in raspberrypi_clk_register() devm_kasprintf() returns NULL when memory allocation fails. Currently, raspberrypi_clk_register() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue. | |||||
| CVE-2025-38121 | 2025-07-03 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: avoid panic on init failure In case of an error during init, in_hw_restart will be set, but it will never get cleared. Instead, we will retry to init again, and then we will act like we are in a restart when we are actually not. This causes (among others) to a NULL pointer dereference when canceling rx_omi::finished_work, that was not even initialized, because we thought that we are in hw_restart. Set in_hw_restart to true only if the fw is running, then we know that FW was loaded successfully and we are not going to the retry loop. | |||||
| CVE-2025-38149 | 2025-07-03 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net: phy: clear phydev->devlink when the link is deleted There is a potential crash issue when disabling and re-enabling the network port. When disabling the network port, phy_detach() calls device_link_del() to remove the device link, but it does not clear phydev->devlink, so phydev->devlink is not a NULL pointer. Then the network port is re-enabled, but if phy_attach_direct() fails before calling device_link_add(), the code jumps to the "error" label and calls phy_detach(). Since phydev->devlink retains the old value from the previous attach/detach cycle, device_link_del() uses the old value, which accesses a NULL pointer and causes a crash. The simplified crash log is as follows. [ 24.702421] Call trace: [ 24.704856] device_link_put_kref+0x20/0x120 [ 24.709124] device_link_del+0x30/0x48 [ 24.712864] phy_detach+0x24/0x168 [ 24.716261] phy_attach_direct+0x168/0x3a4 [ 24.720352] phylink_fwnode_phy_connect+0xc8/0x14c [ 24.725140] phylink_of_phy_connect+0x1c/0x34 Therefore, phydev->devlink needs to be cleared when the device link is deleted. | |||||
| CVE-2025-53006 | 2025-07-03 | N/A | N/A | ||
| DataEase is an open source business intelligence and data visualization tool. Prior to version 2.10.11, in both PostgreSQL and Redshift, apart from parameters like "socketfactory" and "socketfactoryarg", there are also "sslfactory" and "sslfactoryarg" with similar functionality. The difference lies in that "sslfactory" and related parameters need to be triggered after establishing the connection. Other similar parameters include "sslhostnameverifier", "sslpasswordcallback", and "authenticationPluginClassName". This issue has been patched in 2.10.11. | |||||
| CVE-2025-38118 | 2025-07-03 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete This reworks MGMT_OP_REMOVE_ADV_MONITOR to not use mgmt_pending_add to avoid crashes like bellow: ================================================================== BUG: KASAN: slab-use-after-free in mgmt_remove_adv_monitor_complete+0xe5/0x540 net/bluetooth/mgmt.c:5406 Read of size 8 at addr ffff88801c53f318 by task kworker/u5:5/5341 CPU: 0 UID: 0 PID: 5341 Comm: kworker/u5:5 Not tainted 6.15.0-syzkaller-10402-g4cb6c8af8591 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xd2/0x2b0 mm/kasan/report.c:521 kasan_report+0x118/0x150 mm/kasan/report.c:634 mgmt_remove_adv_monitor_complete+0xe5/0x540 net/bluetooth/mgmt.c:5406 hci_cmd_sync_work+0x261/0x3a0 net/bluetooth/hci_sync.c:334 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x711/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 5987: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4358 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] mgmt_pending_new+0x65/0x240 net/bluetooth/mgmt_util.c:252 mgmt_pending_add+0x34/0x120 net/bluetooth/mgmt_util.c:279 remove_adv_monitor+0x103/0x1b0 net/bluetooth/mgmt.c:5454 hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719 hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:727 sock_write_iter+0x258/0x330 net/socket.c:1131 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x548/0xa90 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 5989: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x62/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2380 [inline] slab_free mm/slub.c:4642 [inline] kfree+0x18e/0x440 mm/slub.c:4841 mgmt_pending_foreach+0xc9/0x120 net/bluetooth/mgmt_util.c:242 mgmt_index_removed+0x10d/0x2f0 net/bluetooth/mgmt.c:9366 hci_sock_bind+0xbe9/0x1000 net/bluetooth/hci_sock.c:1314 __sys_bind_socket net/socket.c:1810 [inline] __sys_bind+0x2c3/0x3e0 net/socket.c:1841 __do_sys_bind net/socket.c:1846 [inline] __se_sys_bind net/socket.c:1844 [inline] __x64_sys_bind+0x7a/0x90 net/socket.c:1844 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f | |||||
| CVE-2025-53108 | 2025-07-03 | N/A | N/A | ||
| HomeBox is a home inventory and organization system. Prior to 0.20.1, HomeBox contains a missing authorization check in the API endpoints responsible for updating and deleting inventory item attachments. This flaw allows authenticated users to perform unauthorized actions on inventory item attachments that they do not own. This issue could lead to unauthorized data manipulation or loss of critical inventory data. This issue has been patched in version 0.20.1. There are no workarounds, users must upgrade. | |||||
| CVE-2025-38140 | 2025-07-03 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: dm: limit swapping tables for devices with zone write plugs dm_revalidate_zones() only allowed new or previously unzoned devices to call blk_revalidate_disk_zones(). If the device was already zoned, disk->nr_zones would always equal md->nr_zones, so dm_revalidate_zones() returned without doing any work. This would make the zoned settings for the device not match the new table. If the device had zone write plug resources, it could run into errors like bdev_zone_is_seq() reading invalid memory because disk->conv_zones_bitmap was the wrong size. If the device doesn't have any zone write plug resources, calling blk_revalidate_disk_zones() will always correctly update device. If blk_revalidate_disk_zones() fails, it can still overwrite or clear the current disk->nr_zones value. In this case, DM must restore the previous value of disk->nr_zones, so that the zoned settings will continue to match the previous value that it fell back to. If the device already has zone write plug resources, blk_revalidate_disk_zones() will not correctly update them, if it is called for arbitrary zoned device changes. Since there is not much need for this ability, the easiest solution is to disallow any table reloads that change the zoned settings, for devices that already have zone plug resources. Specifically, if a device already has zone plug resources allocated, it can only switch to another zoned table that also emulates zone append. Also, it cannot change the device size or the zone size. A device can switch to an error target. | |||||
| CVE-2025-38148 | 2025-07-03 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net: phy: mscc: Fix memory leak when using one step timestamping Fix memory leak when running one-step timestamping. When running one-step sync timestamping, the HW is configured to insert the TX time into the frame, so there is no reason to keep the skb anymore. As in this case the HW will never generate an interrupt to say that the frame was timestamped, then the frame will never released. Fix this by freeing the frame in case of one-step timestamping. | |||||
| CVE-2025-38115 | 2025-07-03 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: fix a potential crash on gso_skb handling SFQ has an assumption of always being able to queue at least one packet. However, after the blamed commit, sch->q.len can be inflated by packets in sch->gso_skb, and an enqueue() on an empty SFQ qdisc can be followed by an immediate drop. Fix sfq_drop() to properly clear q->tail in this situation. ip netns add lb ip link add dev to-lb type veth peer name in-lb netns lb ethtool -K to-lb tso off # force qdisc to requeue gso_skb ip netns exec lb ethtool -K in-lb gro on # enable NAPI ip link set dev to-lb up ip -netns lb link set dev in-lb up ip addr add dev to-lb 192.168.20.1/24 ip -netns lb addr add dev in-lb 192.168.20.2/24 tc qdisc replace dev to-lb root sfq limit 100 ip netns exec lb netserver netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 & | |||||
| CVE-2025-34071 | 2025-07-03 | N/A | N/A | ||
| A remote code execution vulnerability in GFI Kerio Control 9.4.5 allows attackers with administrative access to upload and execute arbitrary code through the firmware upgrade feature. The system upgrade mechanism accepts unsigned .img files, which can be modified to include malicious scripts within the upgrade.sh or disk image components. These modified upgrade images are not validated for authenticity or integrity, and are executed by the system post-upload, enabling root access. | |||||
| CVE-2025-38129 | 2025-07-03 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: page_pool: Fix use-after-free in page_pool_recycle_in_ring syzbot reported a uaf in page_pool_recycle_in_ring: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862 Read of size 8 at addr ffff8880286045a0 by task syz.0.284/6943 CPU: 0 UID: 0 PID: 6943 Comm: syz.0.284 Not tainted 6.13.0-rc3-syzkaller-gdfa94ce54f41 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:165 [inline] _raw_spin_unlock_bh+0x1b/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] ptr_ring_produce_bh include/linux/ptr_ring.h:164 [inline] page_pool_recycle_in_ring net/core/page_pool.c:707 [inline] page_pool_put_unrefed_netmem+0x748/0xb00 net/core/page_pool.c:826 page_pool_put_netmem include/net/page_pool/helpers.h:323 [inline] page_pool_put_full_netmem include/net/page_pool/helpers.h:353 [inline] napi_pp_put_page+0x149/0x2b0 net/core/skbuff.c:1036 skb_pp_recycle net/core/skbuff.c:1047 [inline] skb_free_head net/core/skbuff.c:1094 [inline] skb_release_data+0x6c4/0x8a0 net/core/skbuff.c:1125 skb_release_all net/core/skbuff.c:1190 [inline] __kfree_skb net/core/skbuff.c:1204 [inline] sk_skb_reason_drop+0x1c9/0x380 net/core/skbuff.c:1242 kfree_skb_reason include/linux/skbuff.h:1263 [inline] __skb_queue_purge_reason include/linux/skbuff.h:3343 [inline] root cause is: page_pool_recycle_in_ring ptr_ring_produce spin_lock(&r->producer_lock); WRITE_ONCE(r->queue[r->producer++], ptr) //recycle last page to pool page_pool_release page_pool_scrub page_pool_empty_ring ptr_ring_consume page_pool_return_page //release all page __page_pool_destroy free_percpu(pool->recycle_stats); free(pool) //free spin_unlock(&r->producer_lock); //pool->ring uaf read recycle_stat_inc(pool, ring); page_pool can be free while page pool recycle the last page in ring. Add producer-lock barrier to page_pool_release to prevent the page pool from being free before all pages have been recycled. recycle_stat_inc() is empty when CONFIG_PAGE_POOL_STATS is not enabled, which will trigger Wempty-body build warning. Add definition for pool stat macro to fix warning. | |||||