Total
92959 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-47678 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: icmp: change the order of rate limits ICMP messages are ratelimited : After the blamed commits, the two rate limiters are applied in this order: 1) host wide ratelimit (icmp_global_allow()) 2) Per destination ratelimit (inetpeer based) In order to avoid side-channels attacks, we need to apply the per destination check first. This patch makes the following change : 1) icmp_global_allow() checks if the host wide limit is reached. But credits are not yet consumed. This is deferred to 3) 2) The per destination limit is checked/updated. This might add a new node in inetpeer tree. 3) icmp_global_consume() consumes tokens if prior operations succeeded. This means that host wide ratelimit is still effective in keeping inetpeer tree small even under DDOS. As a bonus, I removed icmp_global.lock as the fast path can use a lock-free operation. | |||||
| CVE-2024-47734 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bonding: Fix unnecessary warnings and logs from bond_xdp_get_xmit_slave() syzbot reported a WARNING in bond_xdp_get_xmit_slave. To reproduce this[1], one bond device (bond1) has xdpdrv, which increases bpf_master_redirect_enabled_key. Another bond device (bond0) which is unsupported by XDP but its slave (veth3) has xdpgeneric that returns XDP_TX. This triggers WARN_ON_ONCE() from the xdp_master_redirect(). To reduce unnecessary warnings and improve log management, we need to delete the WARN_ON_ONCE() and add ratelimit to the netdev_err(). [1] Steps to reproduce: # Needs tx_xdp with return XDP_TX; ip l add veth0 type veth peer veth1 ip l add veth3 type veth peer veth4 ip l add bond0 type bond mode 6 # BOND_MODE_ALB, unsupported by XDP ip l add bond1 type bond # BOND_MODE_ROUNDROBIN by default ip l set veth0 master bond1 ip l set bond1 up # Increases bpf_master_redirect_enabled_key ip l set dev bond1 xdpdrv object tx_xdp.o section xdp_tx ip l set veth3 master bond0 ip l set bond0 up ip l set veth4 up # Triggers WARN_ON_ONCE() from the xdp_master_redirect() ip l set veth3 xdpgeneric object tx_xdp.o section xdp_tx | |||||
| CVE-2024-47733 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Delete subtree of 'fs/netfs' when netfs module exits In netfs_init() or fscache_proc_init(), we create dentry under 'fs/netfs', but in netfs_exit(), we only delete the proc entry of 'fs/netfs' without deleting its subtree. This triggers the following WARNING: ================================================================== remove_proc_entry: removing non-empty directory 'fs/netfs', leaking at least 'requests' WARNING: CPU: 4 PID: 566 at fs/proc/generic.c:717 remove_proc_entry+0x160/0x1c0 Modules linked in: netfs(-) CPU: 4 UID: 0 PID: 566 Comm: rmmod Not tainted 6.11.0-rc3 #860 RIP: 0010:remove_proc_entry+0x160/0x1c0 Call Trace: <TASK> netfs_exit+0x12/0x620 [netfs] __do_sys_delete_module.isra.0+0x14c/0x2e0 do_syscall_64+0x4b/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== Therefore use remove_proc_subtree() instead of remove_proc_entry() to fix the above problem. | |||||
| CVE-2024-47731 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drivers/perf: Fix ali_drw_pmu driver interrupt status clearing The alibaba_uncore_pmu driver forgot to clear all interrupt status in the interrupt processing function. After the PMU counter overflow interrupt occurred, an interrupt storm occurred, causing the system to hang. Therefore, clear the correct interrupt status in the interrupt handling function to fix it. | |||||
| CVE-2024-47660 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fsnotify: clear PARENT_WATCHED flags lazily In some setups directories can have many (usually negative) dentries. Hence __fsnotify_update_child_dentry_flags() function can take a significant amount of time. Since the bulk of this function happens under inode->i_lock this causes a significant contention on the lock when we remove the watch from the directory as the __fsnotify_update_child_dentry_flags() call from fsnotify_recalc_mask() races with __fsnotify_update_child_dentry_flags() calls from __fsnotify_parent() happening on children. This can lead upto softlockup reports reported by users. Fix the problem by calling fsnotify_update_children_dentry_flags() to set PARENT_WATCHED flags only when parent starts watching children. When parent stops watching children, clear false positive PARENT_WATCHED flags lazily in __fsnotify_parent() for each accessed child. | |||||
| CVE-2024-47739 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: padata: use integer wrap around to prevent deadlock on seq_nr overflow When submitting more than 2^32 padata objects to padata_do_serial, the current sorting implementation incorrectly sorts padata objects with overflowed seq_nr, causing them to be placed before existing objects in the reorder list. This leads to a deadlock in the serialization process as padata_find_next cannot match padata->seq_nr and pd->processed because the padata instance with overflowed seq_nr will be selected next. To fix this, we use an unsigned integer wrap around to correctly sort padata objects in scenarios with integer overflow. | |||||
| CVE-2024-47662 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Remove register from DCN35 DMCUB diagnostic collection [Why] These registers should not be read from driver and triggering the security violation when DMCUB work times out and diagnostics are collected blocks Z8 entry. [How] Remove the register read from DCN35. | |||||
| CVE-2024-47664 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: spi: hisi-kunpeng: Add verification for the max_frequency provided by the firmware If the value of max_speed_hz is 0, it may cause a division by zero error in hisi_calc_effective_speed(). The value of max_speed_hz is provided by firmware. Firmware is generally considered as a trusted domain. However, as division by zero errors can cause system failure, for defense measure, the value of max_speed is validated here. So 0 is regarded as invalid and an error code is returned. | |||||
| CVE-2024-47665 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setup Definitely condition dma_get_cache_alignment * defined value > 256 during driver initialization is not reason to BUG_ON(). Turn that to graceful error out with -EINVAL. | |||||
| CVE-2024-49858 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: efistub/tpm: Use ACPI reclaim memory for event log to avoid corruption The TPM event log table is a Linux specific construct, where the data produced by the GetEventLog() boot service is cached in memory, and passed on to the OS using an EFI configuration table. The use of EFI_LOADER_DATA here results in the region being left unreserved in the E820 memory map constructed by the EFI stub, and this is the memory description that is passed on to the incoming kernel by kexec, which is therefore unaware that the region should be reserved. Even though the utility of the TPM2 event log after a kexec is questionable, any corruption might send the parsing code off into the weeds and crash the kernel. So let's use EFI_ACPI_RECLAIM_MEMORY instead, which is always treated as reserved by the E820 conversion logic. | |||||
| CVE-2024-47666 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Set phy->enable_completion only when we wait for it pm8001_phy_control() populates the enable_completion pointer with a stack address, sends a PHY_LINK_RESET / PHY_HARD_RESET, waits 300 ms, and returns. The problem arises when a phy control response comes late. After 300 ms the pm8001_phy_control() function returns and the passed enable_completion stack address is no longer valid. Late phy control response invokes complete() on a dangling enable_completion pointer which leads to a kernel crash. | |||||
| CVE-2024-49856 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86/sgx: Fix deadlock in SGX NUMA node search When the current node doesn't have an EPC section configured by firmware and all other EPC sections are used up, CPU can get stuck inside the while loop that looks for an available EPC page from remote nodes indefinitely, leading to a soft lockup. Note how nid_of_current will never be equal to nid in that while loop because nid_of_current is not set in sgx_numa_mask. Also worth mentioning is that it's perfectly fine for the firmware not to setup an EPC section on a node. While setting up an EPC section on each node can enhance performance, it is not a requirement for functionality. Rework the loop to start and end on *a* node that has SGX memory. This avoids the deadlock looking for the current SGX-lacking node to show up in the loop when it never will. | |||||
| CVE-2024-47667 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0) Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0 (SPRZ452D_July 2018_Revised December 2019 [1]) mentions when an inbound PCIe TLP spans more than two internal AXI 128-byte bursts, the bus may corrupt the packet payload and the corrupt data may cause associated applications or the processor to hang. The workaround for Errata #i2037 is to limit the maximum read request size and maximum payload size to 128 bytes. Add workaround for Errata #i2037 here. The errata and workaround is applicable only to AM65x SR 1.0 and later versions of the silicon will have this fixed. [1] -> https://www.ti.com/lit/er/sprz452i/sprz452i.pdf | |||||
| CVE-2024-6010 | 1 Stylemixthemes | 1 Cost Calculator Builder | 2024-10-23 | N/A | 5.3 MEDIUM |
| The Cost Calculator Builder PRO plugin for WordPress is vulnerable to price manipulation in all versions up to, and including, 3.2.1. This is due to the plugin allowing the price field to be manipulated prior to processing via the 'create_cc_order' function, called from the Cost Calculator Builder plugin. This makes it possible for unauthenticated attackers to manipulate the price of orders submitted via the calculator. Note: this vulnerability was partially patched with the release of Cost Calculator Builder version 3.2.17. | |||||
| CVE-2024-47658 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: stm32/cryp - call finalize with bh disabled The finalize operation in interrupt mode produce a produces a spinlock recursion warning. The reason is the fact that BH must be disabled during this process. | |||||
| CVE-2024-48049 | 1 Mightyplugins | 1 Mighty Builder | 2024-10-23 | N/A | 5.4 MEDIUM |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Mighty Plugins Mighty Builder allows Stored XSS.This issue affects Mighty Builder: from n/a through 1.0.2. | |||||
| CVE-2024-49334 | 1 Unizoewebsolutions | 1 Jlayer Parallax Slider | 2024-10-23 | N/A | 6.1 MEDIUM |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Unizoe Web Solutions jLayer Parallax Slider allows Reflected XSS.This issue affects jLayer Parallax Slider: from n/a through 1.0. | |||||
| CVE-2024-49323 | 1 Sourav | 1 All In One Slider | 2024-10-23 | N/A | 6.1 MEDIUM |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Sourav All in One Slider allows Reflected XSS.This issue affects All in One Slider: from n/a through 1.1. | |||||
| CVE-2024-47689 | 1 Linux | 1 Linux Kernel | 2024-10-23 | N/A | 5.3 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to don't set SB_RDONLY in f2fs_handle_critical_error() syzbot reports a f2fs bug as below: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 58 at kernel/rcu/sync.c:177 rcu_sync_dtor+0xcd/0x180 kernel/rcu/sync.c:177 CPU: 1 UID: 0 PID: 58 Comm: kworker/1:2 Not tainted 6.10.0-syzkaller-12562-g1722389b0d86 #0 Workqueue: events destroy_super_work RIP: 0010:rcu_sync_dtor+0xcd/0x180 kernel/rcu/sync.c:177 Call Trace: percpu_free_rwsem+0x41/0x80 kernel/locking/percpu-rwsem.c:42 destroy_super_work+0xec/0x130 fs/super.c:282 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312 worker_thread+0x86d/0xd40 kernel/workqueue.c:3390 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 As Christian Brauner pointed out [1]: the root cause is f2fs sets SB_RDONLY flag in internal function, rather than setting the flag covered w/ sb->s_umount semaphore via remount procedure, then below race condition causes this bug: - freeze_super() - sb_wait_write(sb, SB_FREEZE_WRITE) - sb_wait_write(sb, SB_FREEZE_PAGEFAULT) - sb_wait_write(sb, SB_FREEZE_FS) - f2fs_handle_critical_error - sb->s_flags |= SB_RDONLY - thaw_super - thaw_super_locked - sb_rdonly() is true, so it skips sb_freeze_unlock(sb, SB_FREEZE_FS) - deactivate_locked_super Since f2fs has almost the same logic as ext4 [2] when handling critical error in filesystem if it mounts w/ errors=remount-ro option: - set CP_ERROR_FLAG flag which indicates filesystem is stopped - record errors to superblock - set SB_RDONLY falg Once we set CP_ERROR_FLAG flag, all writable interfaces can detect the flag and stop any further updates on filesystem. So, it is safe to not set SB_RDONLY flag, let's remove the logic and keep in line w/ ext4 [3]. [1] https://lore.kernel.org/all/20240729-himbeeren-funknetz-96e62f9c7aee@brauner [2] https://lore.kernel.org/all/20240729132721.hxih6ehigadqf7wx@quack3 [3] https://lore.kernel.org/linux-ext4/20240805201241.27286-1-jack@suse.cz | |||||
| CVE-2024-49606 | 1 Dotsquares | 1 Google Map Locations | 2024-10-23 | N/A | 6.1 MEDIUM |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Dotsquares Google Map Locations allows Reflected XSS.This issue affects Google Map Locations: from n/a through 1.0. | |||||